Sodium thiopental

From Infogalactic: the planetary knowledge core
(Redirected from Thiopental)
Jump to: navigation, search
Sodium thiopental
1:1 mixture (racemate)
Sodium-thiopental-3D-vdW-2.png
Systematic (IUPAC) name
(RS)-[5-ethyl-4,6-dioxo-5-(pentan-2-yl)-1,4,5,6-tetrahydropyrimidin-2-yl]sulfanide sodium
Clinical data
AHFS/Drugs.com monograph
Legal status
Routes of
administration
Oral, intravenous
Pharmacokinetic data
Biological half-life 5.5[1]-26 hours[2]
Identifiers
CAS Number 71-73-8 YesY (sodium salt)
76-75-5 (free acid)
ATC code N01AF03 (WHO) N05CA19
PubChem CID: 3000714
DrugBank DB00599 N
ChemSpider 2272257 YesY
UNII 49Y44QZL70 N
KEGG D00714 YesY
ChEBI CHEBI:9561 YesY
ChEMBL CHEMBL738 YesY
Chemical data
Formula C11H17N2NaO2S
Molecular mass 264.32 g/mol
  • [Na+].O=C1NC(=S)/N=C(/[O-])C1(C(C)CCC)CC
  • InChI=1S/C11H18N2O2S.Na/c1-4-6-7(3)11(5-2)8(14)12-10(16)13-9(11)15;/h7H,4-6H2,1-3H3,(H2,12,13,14,15,16);/q;+1/p-1 YesY
  • Key:AWLILQARPMWUHA-UHFFFAOYSA-M YesY
 NYesY (what is this?)  (verify)

Sodium thiopental, also known as Sodium Pentothal (a trademark of Abbott Laboratories, not to be confused with pentobarbital), thiopental, thiopentone, or Trapanal (also a trademark), is a rapid-onset short-acting barbiturate general anesthetic that is an analogue of thiobarbital. Sodium thiopental is a core medicine in the World Health Organization's "Essential Drugs List", which is a list of minimum medical needs for a basic healthcare system.[3] It was previously the first of three drugs administered during most lethal injections in the United States, but the U.S. manufacturer Hospira stopped manufacturing the drug and the EU banned the export of the drug for this purpose.[4]

Uses

Anesthesia

Sodium thiopental is an ultra-short-acting barbiturate and has been used commonly in the induction phase of general anesthesia. Its use has been largely replaced with that of propofol.[citation needed] Following intravenous injection, the drug rapidly reaches the brain and causes unconsciousness within 30–45 seconds. At one minute, the drug attains a peak concentration of about 60% of the total dose in the brain. Thereafter, the drug distributes to the rest of the body, and in about 5–10 minutes the concentration is low enough in the brain such that consciousness returns.[citation needed]

A normal dose of sodium thiopental (usually 4–6 mg/kg) given to a pregnant woman for operative delivery (caesarian section) rapidly makes her unconscious, but the baby in her uterus remains conscious. However, larger or repeated doses can depress the baby.[citation needed]

Sodium thiopental is not used to maintain anesthesia in surgical procedures because, in infusion, it displays zero-order elimination kinetics, leading to a long period before consciousness is regained. Instead, anesthesia is usually maintained with an inhaled anesthetic (gas) agent. Inhaled anesthetics are eliminated relatively quickly, so that stopping the inhaled anesthetic will allow rapid return of consciousness. Sodium thiopental would have to be given in large amounts to maintain an anesthetic plane, and because of its 11.5–26 hour half-life, consciousness would take a long time to return.[5]

In veterinary medicine, sodium thiopental is used to induce anesthesia in animals. Since it is redistributed to fat, certain lean breeds of dogs such as sight hounds will have prolonged recoveries from sodium thiopental due to their lack of body fat and their lean body mass. Conversely, obese animals will have rapid recoveries, but it will be some time[vague] before it is entirely removed (metabolized) from their bodies. Sodium thiopental is always administered intravenously, as it can be fairly irritating; severe tissue necrosis and sloughing can occur if it is injected incorrectly into the tissue around a vein.[citation needed]

Medically induced coma

In addition to anesthesia induction, sodium thiopental was historically used to induce medical comas.[6] It has now been superseded by drugs such as propofol because their effects wear off more quickly than thiopental. Patients with brain swelling, causing elevation of intracranial pressure, either secondary to trauma or following surgery, may benefit from this drug. Sodium thiopental, and the barbiturate class of drugs, decrease neuronal activity and therefore decrease the production of osmotically active metabolites, which in turn decreases swelling. Patients with significant swelling have improved outcomes following the induction of coma. Reportedly, thiopental has been shown to be superior to pentobarbital in reducing intracranial pressure.This phenomenon is also termed as Reverse steal Effect.[7]

Status epilepticus

In refractory status epilepticus, thiopental may be used to terminate a seizure.

Euthanasia

Sodium thiopental is used intravenously for the purposes of euthanasia. In both Belgium and the Netherlands, where active euthanasia is allowed by law, the standard protocol recommends sodium thiopental as the ideal agent to induce coma, followed by pancuronium bromide.[8]

Intravenous administration is the most reliable and rapid way to accomplish euthanasia. A coma is first induced by intravenous administration of 20 mg/kg thiopental sodium (Nesdonal) in a small volume (10 ml physiological saline). Then, a triple dose of a non-depolarizing neuromuscular blocking drug is given, such as 20 mg pancuronium bromide (Pavulon) or 20 mg vecuronium bromide (Norcuron). The muscle relaxant should be given intravenously to ensure optimal availability but pancuronium bromide may be administered intramuscularly at an increased dosage level of 40 mg.[8]

Lethal injection

Lua error in Module:Details at line 30: attempt to call field '_formatLink' (a nil value).

Along with pancuronium bromide and potassium chloride, thiopental is used in 34 states of the U.S. to execute prisoners by lethal injection. A very large dose is given to ensure rapid loss of consciousness. Although death usually occurs within ten minutes of the beginning of the injection process, some have been known to take longer.[9] The use of sodium thiopental in execution protocols was challenged in court after a study in the medical journal The Lancet reported autopsies of executed inmates showed the level of thiopental in their bloodstream was insufficient to cause unconsciousness.

On December 8, 2009, the State of Ohio became the first to use a single dose of sodium thiopental for its capital execution, following the failed use of the standard three-drug cocktail during a recent execution, due to inability to locate suitable veins. Kenneth Biros was executed using the single-drug method.[10]

The state of Washington is now the second state in the U.S. to use the single-dose sodium thiopental injections for death penalty executions. On September 10, 2010, Cal Coburn Brown was executed. This was the first execution in the state to use a single dose, single drug injection. His death was pronounced approximately one and a half minutes after the intravenous administration of five grams of the drug.[11]

After its use for execution of Jeffrey Landrigan in the U.S., the UK introduced a ban on the export of sodium thiopental in December 2010,[12] after it was established that no European supplies to the U.S. were being used for any other purpose.[13] The restrictions were based on "the European Union Torture Regulation (including licensing of drugs used in execution by lethal injection)".[14] From 21 December 2011 the European Union extended trade restrictions to prevent the export of certain medicinal products for capital punishment, stating that "the Union disapproves of capital punishment in all circumstances and works towards its universal abolition".[15]

Truth serum

Lua error in Module:Details at line 30: attempt to call field '_formatLink' (a nil value). Thiopental (Pentothal) is still used in some places as a truth serum to weaken the resolve of a subject and make them more compliant to pressure.[16] The barbiturates as a class decrease higher cortical brain functioning. Some psychiatrists hypothesize that because lying is more complex than telling the truth, suppression of the higher cortical functions may lead to the uncovering of the truth. The drug tends to make subjects loquacious and cooperative with interrogators; however, the reliability of confessions made under thiopental is questionable.[17] Sodium thiopental is featured as a truth serum in several Hollywood films, in comics and other literature, and even in popular music.[18]

Psychiatry

Psychiatrists have used thiopental to desensitize patients with phobias,[19] and to "facilitate the recall of painful repressed memories."[20] One psychiatrist who worked with thiopental is the Dutch Professor Jan Bastiaans, who used this procedure to help relieve trauma in surviving victims of the Holocaust.[21]

Mechanism of action

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Sodium thiopental is a member of the barbiturate class of drugs, which are relatively non-selective compounds that bind to an entire superfamily of ligand-gated ion channels, of which the GABAA receptor channel is one of several representatives. This superfamily of ion channels includes the neuronal nAChR channel, the 5HT3R channel, the GlyR channel and others. Surprisingly, while GABAA receptor currents are increased by barbiturates (and other general anesthetics), ligand-gated ion channels that are predominantly permeable for cationic ions are blocked by these compounds. For example, neuronal nAChR channels are blocked by clinically relevant anesthetic concentrations of both sodium thiopental and pentobarbital.[22] Such findings implicate (non-GABA-ergic) ligand-gated ion channels, e.g. the neuronal nAChR channel, in mediating some of the (side) effects of barbiturates.[23] The GABAA receptor is an inhibitory channel that decreases neuronal activity, and barbiturates enhance the inhibitory action of the GABAA receptor.[24]

Controversies

Following a shortage that led a court to delay an execution in California, a company spokesman for Hospira, the sole American manufacturer of the drug, objected to the use of thiopental in lethal injection. "Hospira manufactures this product because it improves or saves lives, and the company markets it solely for use as indicated on the product labeling. The drug is not indicated for capital punishment, and Hospira does not support its use in this procedure."[25] On January 21, 2011, the company announced that it would stop production of sodium thiopental from its plant in Italy because it could not guarantee Italian authorities that the drug would not be used in executions. Italy was the only viable place where the company could produce sodium thiopental, leaving the United States without a supplier.[26]

Metabolism

Thiopental rapidly and easily crosses the blood brain barrier as it is a lipophilic molecule. As with all lipid-soluble anaesthetic drugs, the short duration of action of sodium thiopental is due almost entirely to its redistribution away from central circulation towards muscle and fat tissue, due to its very high fat:water partition coefficient (aprx 10), leading to sequestration in fat tissue. Once redistributed, the free fraction in the blood is metabolized in the liver. Sodium thiopental is mainly metabolized to pentobarbital,[27] 5-ethyl-5-(1'-methyl-3'-hydroxybutyl)-2-thiobarbituric acid, and 5-ethyl-5-(1'-methyl-3'-carboxypropyl)-2-thiobarbituric acid.[28]

Dosage

The usual dose range for induction of anesthesia using thiopental is from 3 to 7 mg/kg; however, there are many factors that can alter this. Premedication with sedatives such as benzodiazepines or clonidine will reduce requirements, as do specific disease states and other patient factors. Among patient factors are: age, sex, and lean body mass. Specific disease conditions that can alter the dose requirements of thiopentone and for that matter any other intravenous anaesthetic are: hypovolemia, burns, azotemia, hepatic failure, hypoproteinemia, etc.[citation needed]

Side effects

As with nearly all anesthetic drugs, thiopental causes cardiovascular and respiratory depression resulting in hypotension, apnea and airway obstruction. For these reasons, only suitably trained medical personnel should give thiopental in an environment suitably equipped to deal with these effects. Side effects include headache, agitated emergence, prolonged somnolence, and nausea. Intravenous administration of sodium thiopental is followed instantly by an odor and/or taste sensation, sometimes described as being similar to rotting onions, or to garlic. The hangover from the side effects may last up to 36 hours.

Although individual molecules of thiopental contain one sulfur atom, it is not a sulfonamide, and does not show allergic reactions of sulfa/sulpha drugs.

Contraindications

Thiopental should be used with caution in cases of liver disease, Addison's disease, myxedema, severe heart disease, severe hypotension, a severe breathing disorder, or a family history of porphyria.[29][30]

Co-administration of pentoxifylline and thiopental causes death by acute pulmonary edema in rats. This pulmonary edema was not mediated by cardiac failure or by pulmonary hypertension but was due to increased pulmonary vascular permeability.[31]

History

Sodium thiopental was discovered in the early 1930s by Ernest H. Volwiler and Donalee L. Tabern, working for Abbott Laboratories. It was first used in human beings on March 8, 1934, by Dr. Ralph M. Waters[32] in an investigation of its properties, which were short-term anesthesia and surprisingly little analgesia.[33] Three months later,[34] Dr. John S. Lundy started a clinical trial of thiopental at the Mayo Clinic at the request of Abbott.[35] Abbott continued to make the drug until 2004, when it spun off its hospital-products division as Hospira.

Thiopental is famously associated with a number of anesthetic deaths in victims of the attack on Pearl Harbor. These deaths, relatively soon after the drug's introduction, were said to be due to excessive doses given to shocked trauma patients. However, recent evidence available through freedom of information legislation was reviewed in the British Journal of Anaesthesia,[36] which has suggested that this story was grossly exaggerated. Of the 344 wounded that were admitted to the Tripler Army Hospital only 13 did not survive and it is unlikely that thiopentone overdose was responsible for more than a few of these.

Thiopental is still rarely used as a recreational drug, usually stolen from veterinarians or other legitimate users of the drug; however, more common sedatives such as benzodiazepines are usually preferred as recreational drugs, and abuse of thiopental tends to be uncommon and opportunistic.[citation needed]

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. http://www.trauma.org/archive/anaesthesia/barbcoma.html
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. 8.0 8.1 Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. BBC: Drug sold in UK to be used for execution in Georgia, 14 January 2011
  13. BC: US lethal injection drug faces UK export restrictions, 29 November 2010
  14. UK government Web site: Controls on Torture Goods
  15. EU Council Regulation (EU) No 1352/2011
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. Lua error in package.lua at line 80: module 'strict' not found.
  20. Lua error in package.lua at line 80: module 'strict' not found.
  21. Lua error in package.lua at line 80: module 'strict' not found.
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. Lua error in package.lua at line 80: module 'strict' not found.
  24. Lua error in package.lua at line 80: module 'strict' not found.
  25. Lua error in package.lua at line 80: module 'strict' not found.
  26. Lua error in package.lua at line 80: module 'strict' not found.
  27. Lua error in package.lua at line 80: module 'strict' not found.[dead link]
  28. Lua error in package.lua at line 80: module 'strict' not found.
  29. Lua error in package.lua at line 80: module 'strict' not found.
  30. Lua error in package.lua at line 80: module 'strict' not found.
  31. Lua error in package.lua at line 80: module 'strict' not found.
  32. Lua error in package.lua at line 80: module 'strict' not found.
  33. Lua error in package.lua at line 80: module 'strict' not found.
  34. Lua error in package.lua at line 80: module 'strict' not found.
  35. Lua error in package.lua at line 80: module 'strict' not found.
  36. Lua error in package.lua at line 80: module 'strict' not found.
  37. http://www.chemspider.com/Chemical-Structure.2301672.html?rid=361f4abd-f795-4a6a-8851-1748841ecb6d

External links