Diethyl ether

Diethyl ether

Skeletal formula
Names
IUPAC name Ethoxyethane
Other names Diethyl ether; Dether; Ethyl ether; Ethyl oxide; 3-Oxapentane; Ethoxyethane; Diethyl oxide; Solvent ether
Identifiers
CAS Number	60-29-7 Y
ChEBI	CHEBI:35702 Y
ChEMBL	ChEMBL16264 Y
ChemSpider	3168 Y
Jmol 3D model	Interactive image
KEGG	D01772 Y
PubChem	3283
RTECS number	KI5775000
UNII	0F5N573A2Y Y
InChI InChI=1S/C4H10O/c1-3-5-4-2/h3-4H2,1-2H3 Y Key: RTZKZFJDLAIYFH-UHFFFAOYSA-N Y InChI=1/C4H10O/c1-3-5-4-2/h3-4H2,1-2H3 Key: RTZKZFJDLAIYFH-UHFFFAOYAB
SMILES CCOCC
Properties
Chemical formula	C4H10O
Molar mass	74.12 g·mol−1
Appearance	Colorless liquid
Odor	pungent, sweetish odor
Density	0.7134 g/cm3, liquid
Melting point	−116.3 °C (−177.3 °F; 156.8 K)
Boiling point	34.6 °C (94.3 °F; 307.8 K)
Solubility in water	69 g/L (20 °C)
Vapor pressure	440 mmHg (20°C)
Refractive index (nD)	1.353 (20 °C)
Viscosity	0.224 cP (25 °C)
Structure
Dipole moment	1.15 D (gas)
Thermochemistry
Specific heat capacity (C)	172.5 J/mol·K
Std molar entropy (So298)	253.5 J/mol·K
Std enthalpy of formation (ΔfHo298)	-271.2 ± 1.9 kJ/mol
Std enthalpy of combustion (ΔcHo298)	-2732.1 ± 1.9 kJ/mol
Pharmacology
ATC code	N01AA01
Vapor pressure	{{{value}}}
Related compounds
Related Ethers	Dimethyl ether Methoxypropane
Related compounds	Diethyl sulfide Butanols (isomer)
Supplementary data page
Structure and properties	Refractive index (n), Dielectric constant (εr), etc.
Thermodynamic data	Phase behaviour solid–liquid–gas
Spectral data	UV, IR, NMR, MS
Y verify (what is YN ?)
Infobox references

Diethyl ether, also known as ethoxyethane, ethyl ether, sulfuric ether, or simply ether, is an organic compound in the ether class with the formula (C
₂H
₅)
₂O. It is a colorless, highly volatile flammable liquid. It is commonly used as a solvent and was once used as a general anesthetic. It has narcotic properties and has been known to cause temporary dependence, the only symptom of which is the will to consume more, sometimes referred to as etheromania.

History

The compound may have been created by either Jābir ibn Hayyān in the 8th century or Ramon Llull in 1275, although there is no contemporary evidence of this. It was first synthesized in 1540 by Valerius Cordus, who called it "sweet oil of vitriol" (oleum dulce vitrioli) — the name reflects the fact that it is obtained by distilling a mixture of ethanol and sulfuric acid (then known as oil of vitriol) — and noted some of its medicinal properties. At about the same time, Paracelsus discovered ether's analgesic properties in chickens. The name ether was given to the substance in 1729 by August Sigmund Frobenius.

Applications

It is particularly important as a solvent in the production of cellulose plastics such as cellulose acetate.

As a fuel

Diethyl ether has a high cetane number of 85-96 and is used as a starting fluid, in combination with petroleum distillates for gasoline and diesel engines because of its high volatility and low flash point. For the same reason it is also used as a component of the fuel mixture for carbureted compression ignition model engines. In this way diethyl ether is very similar to one of its precursors, ethanol.

Laboratory uses

Diethyl ether is a common laboratory solvent. It has limited solubility in water (6.05 g/100 ml at 25 °C) and dissolves 1.5 g/100 ml water at 25 °C. This, coupled with its high volatility, makes it ideal for use as the non-polar solvent in liquid-liquid extraction. When used with an aqueous solution, the diethyl ether layer is on top due to the fact that it has a lower density than the water. It is also a common solvent for the Grignard reaction in addition to other reactions involving organometallic reagents. Due to its application in the manufacturing of illicit substances, it is listed in the Table II precursor under the United Nations Convention Against Illicit Traffic in Narcotic Drugs and Psychotropic Substances as well as substances such as acetone, toluene and sulphuric acid.

Anesthetic use

Panel from monument in Boston commemorating Morton's demonstration of ether's anesthetic use.

William T.G. Morton participated in a public demonstration of ether anesthesia on October 16, 1846 at the Ether Dome in Boston, Massachusetts. However, Crawford Williamson Long, M.D., is now known to have demonstrated its use privately as a general anesthetic in surgery to officials in Georgia, as early as March 30, 1842, and Long publicly demonstrated ether's use as a surgical anesthetic on six occasions before the Boston demonstration. British doctors were aware of the anesthetic properties of ether as early as 1840 where it was widely prescribed in conjunction with opium. Diethyl ether largely supplanted the use of chloroform as a general anesthetic due to ether's more favorable therapeutic index, that is, a greater difference between an effective dose and a potentially toxic dose. Because of its associations with Boston, the use of ether became known as the "Yankee Dodge."

Diethyl ether depresses the myocardium and increases tracheobronchial secretions.

Diethyl ether could also be mixed with other anesthetic agents such as chloroform to make C.E. mixture, or chloroform and alcohol to make A.C.E. mixture.

Today, ether is rarely used. The use of flammable ether was displaced by nonflammable fluorinated hydrocarbon anesthetics. Halothane was the first such anesthetic developed and other currently used inhaled anesthetics, such as isoflurane, desflurane, and sevoflurane, are halogenated ethers. Diethyl ether was found to have undesirable side effects, such as post-anesthetic nausea and vomiting. Modern anesthetic agents reduce these side effects.

Medical use

It was once used in pharmaceuticals. A mixture of alcohol and ether was known as "Spirit of ether" or Hoffman's Drops. In the United States, it was removed from Pharmacopeia prior to June 1917.

Recreational use

See also: Addiction to ether consumption

The anesthetic effects of ether have made it a recreational drug. Diethyl ether in anesthetic dosage is an inhalant which has a long history of recreational use. One disadvantage is the high flammability, especially in conjunction with oxygen. One advantage is a well-defined margin between therapeutic and toxic doses, which means one would lose consciousness before dangerous levels of dissolved ether in blood would be reached. With a strong, dense smell, ether causes irritation to respiratory mucosa and is uncomfortable to breathe, and in overdose triggering salivation, vomiting, coughing or spasms. In concentrations of 3–5% in air, an anesthetic effect can slowly be achieved in 15–20 minutes of breathing approximately 15–20 ml of ether, depending on body weight and physical condition. Ether causes a very long excitation stage prior to blacking out.

In the 19th century and early 20th century ether drinking was popular among Polish peasants. It is a traditional and still relatively popular recreational drug among Lemkos. It is usually consumed in a small quantity (kropka, or "dot") poured over milk, water with sugar or orange juice in a shot glass.

Metabolism

A cytochrome P450 enzyme is proposed to metabolize diethyl ether.

Diethyl ether inhibits alcohol dehydrogenase, and thus slows the metabolism of ethanol. It also inhibits metabolism of other drugs requiring oxidative metabolism. For example diazepam requires hepatic oxidization whereas its oxidized metabolite oxazepam does not.

Production

Most diethyl ether is produced as a byproduct of the vapor-phase hydration of ethylene to make ethanol. This process uses solid-supported phosphoric acid catalysts and can be adjusted to make more ether if the need arises. Vapor-phase dehydration of ethanol over some alumina catalysts can give diethyl ether yields of up to 95%.

Diethyl ether can be prepared both in laboratories and on an industrial scale by the acid ether synthesis. Ethanol is mixed with a strong acid, typically sulfuric acid, H₂SO₄. The acid dissociates in the aqueous environment producing hydronium ions, H₃O⁺. A hydrogen ion protonates the electronegative oxygen atom of the ethanol, giving the ethanol molecule a positive charge:

CH₃CH₂OH + H₃O⁺ → CH₃CH₂OH₂⁺ + H₂O

A nucleophilic oxygen atom of unprotonated ethanol displaces a water molecule from the protonated (electrophilic) ethanol molecule, producing water, a hydrogen ion and diethyl ether.

CH₃CH₂OH₂⁺ + CH₃CH₂OH → H₂O + H⁺ + CH₃CH₂OCH₂CH₃

This reaction must be carried out at temperatures lower than 150 °C in order to ensure that an elimination product (ethylene) is not a product of the reaction. At higher temperatures, ethanol will dehydrate to form ethylene. The reaction to make diethyl ether is reversible, so eventually an equilibrium between reactants and products is achieved. Getting a good yield of ether requires that ether be distilled out of the reaction mixture before it reverts to ethanol, taking advantage of Le Chatelier's principle.

Another reaction that can be used for the preparation of ethers is the Williamson ether synthesis, in which an alkoxide (produced by dissolving an alkali metal in the alcohol to be used) performs a nucleophilic substitution upon an alkyl halide.

Safety and stability

Diethyl ether is extremely flammable and may be explosive.

Since ether is heavier than air it can collect low to the ground and the vapour may travel considerable distances to ignition sources, which need not be an open flame, but may be a hot plate, steam pipe, heater etc. Vapour may be ignited by the static electricity which can build up when ether is being poured from one vessel into another. The autoignition temperature of diethyl ether is 160 °C (320 °F). A common practice in chemical labs is to use steam (thus limiting the temperature to 100 °C (212 °F) ) when ether must be heated or distilled. The diffusion of diethyl ether in air is 0.918·10⁻⁵ m²/s (298K, 101.325 kPa).

Ether is sensitive to light and air, tending to form explosive peroxides. Ether peroxides are higher boiling than ether and are contact explosives when dry. Commercial diethyl ether is typically supplied with trace amounts of the antioxidant butylated hydroxytoluene (BHT), which reduces the formation of peroxides. Storage over sodium hydroxide precipitates the intermediate ether hydroperoxides. Water and peroxides can be removed by either distillation from sodium and benzophenone, or by passing through a column of activated alumina.

External links

• Michael Faraday's announcement of ether as an anesthetic in 1818
• Calculation of vapor pressure, liquid density, dynamic liquid viscosity, surface tension of diethyl ether, ddbonline.ddbst.de
• CDC - NIOSH Pocket Guide to Chemical Hazards