South African type XM3 tender

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
South African type XM3 tender
SAR Klasse 9.jpg
Type XM3 tender on CSAR Class 9
Type and origin
Locomotive CSAR Class 9
Designer Central South African Railways
(P.A. Hyde)
Builder Vulcan Foundry
In service 1904
Specifications
Configuration 2-axle bogies
Gauge 3 ft 6 in (1,067 mm) Cape gauge
Length 25 ft 10 in (7,874 mm) approx.
Wheel dia. Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value). as built
34 in (864 mm) retyred
Wheelbase Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value).
 • Bogie 4 ft 7 in (1,397 mm)
Axle load Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value). av.
 • Bogie Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value). each
Weight empty 44,000 lb (20,000 kg)
Weight w/o Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value).
Fuel type Coal
Fuel cap. 10 LT (10.2 t)
Water cap. Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value).
Stoking Manual
Couplers Drawbar & Bell link-and-pin
Career
Operators Central South African Railways
South African Railways
Numbers SAR 727-731

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The South African type XM3 tender was a steam locomotive tender from the pre-Union era in the Transvaal.

The Type XM3 tender entered service in 1904, as tenders to the Class 9 4-6-2 Pacific type steam locomotives which were acquired by the Central South African Railways in that year. In 1912, these locomotives retained their Class 9 designation on the South African Railways.[1][2][3]

Manufacturer

Type XM3 tenders were built by Vulcan Foundry of Newton-le-Willows in England in 1904.[1]

The Central South African Railways (CSAR) placed five Class 9 Pacific type locomotives in service in 1904. The locomotive and tender were designed in 1903 by P.A. Hyde, who assumed the position of Chief Locomotive Superintendent of the CSAR upon its inception in July 1902.[1][2][3]

The Type XM3 entered service as tenders to these locomotives, which were acquired to work the Durban-bound mail trains from Johannesburg as far as Charlestown, on the Transvaal-Natal border.[1][2][3]

Classification

Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the South African Railways (SAR) and these tenders were designated Type XM3.[1][3]

In the SAR years, tenders were numbered for the engines they were delivered with. In most cases, an oval number plate, bearing the engine number and tender type, would be attached to the rear end of the tender. During the classification and renumbering of locomotives onto the SAR roster in 1912, no separate classification and renumbering list was published for tenders, which should have been renumbered according to the locomotive renumbering list.[3][4]

Only Class 9 locomotives were delivered new with Type XM3 tenders. Bearing in mind that tenders could and did migrate between engines, these tenders should have been numbered in the SAR number range from 727 to 731.[1][3][4]

Letter codes

The first letter of the tender type indicates the classes of engines to which it can be coupled. The "X_" tenders could be used with the following locomotive classes:[3]

The second letter indicates the tender's water capacity. The "_M" tenders had a capacity of Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value)..[3]

A number, when added after the letter code, indicates differences between similar tender types, such as wheelbase or coal bunker capacity.[3]

References

  1. 1.0 1.1 1.2 1.3 1.4 1.5 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 43.
  3. 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 41, 43.
  4. 4.0 4.1 Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer’s Office, Pretoria, January 1912 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)