PDMI
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
<templatestyles src="Module:Infobox/styles.css"></templatestyles>
File:PDMI.jpg | |||
Production history | |||
---|---|---|---|
Designer | CEA | ||
Designed | February 2010 | ||
General specifications | |||
Length | 22 mm | ||
Width | 2.5 mm | ||
Hot pluggable | Yes | ||
External | Yes | ||
Audio signal | Analog stereo, digital DisplayPort (1-8 channels, 16 or 24-bit linear PCM; 32 to 192 kHz sampling rate) | ||
Video signal | Digital 2-lane DisplayPort 1.1, 4.32 Gbit/s data rate | ||
Pins | 30 pins | ||
Data | |||
Data signal | USB 3.0 SuperSpeed + 1 Mbit/s for the DisplayPort auxiliary channel |
PDMI (Portable Digital Media Interface) is an interconnection standard for portable media players. It has been developed by CEA (Consumer Electronics Association) as ANSI/CEA-2017-A standard Common Interconnection for Portable Media Players in February 2010. Chaired by David McLauchlan from Microsoft, the standard was developed with the input or support of over fifty consumer electronics companies worldwide. [1]
Contents
Development and history
CEA-2017-A is the new revision of the earlier ANSI/CEA-2017 standard adopted in July 2007, which used a proprietary serial protocol based on Media Oriented Systems Transport (MOST) in-vehicle network;[2][3][4] the 2007 revision has seen only marginal use in actual devices. [5] New CEA-2017-A devices are not compatible with devices manufactured under the 2007 revision.[6]
PDMI connector is intended to serve as a common interconnection between docking devices and displays and portable/nomadic devices with media playback capability. Intended host devices include docking stations for home A/V equipment, in-car entertainment systems, digital media kiosks, and hotel/in-flight entertainment systems, where PDMI aims to replace the ubiquitous iPod cradle connector.[7]
PDMI uses a 30 pin receptacle with approximate size of 2.5 mm by 22 mm; a cradle-style connector is also defined. The PDMI connector includes the following electrical interfaces:
- 2-lane DisplayPort v1.1a with AUX Channel, Hot Plug Detect, and 3.3 V power line
- USB 3.0, USB 2.0, and USB On-The-Go
- Analog stereo line-out for legacy audio
- HDMI CEC for remote control
- High output power line from both host and portable device
DisplayPort component provides data rate of 4.32 Gbit/s and supports up to 1080p60 video and 8-channel audio playback on an attached display device, as well as EDID and display control commands. DisplayPort signal can be converted to HDMI format using active converter circuitry in the dock or external signal conversion adapter powered by 3.3 V DisplayPort power.
Power supply from both the host (docking station) and portable device allows for supporting the portable device with power and battery charging, as well as supporting accessories from the portable device.
USB 3.0 "SuperSpeed", USB 2.0, and USB On-The-Go support file transfer and device control, as well as device-to-device intercommunication.
Devices that use PDMI
The first mass-production device from a major manufacturer to incorporate PDMI is the Dell Streak, a 5 in (130 mm) tablet device running the Android operating system version 1.6 through 2.2.
Lua error in package.lua at line 80: module 'strict' not found.
Device Name | Release Date | Notes |
---|---|---|
Advent Vega[8] | Possible Non-standard connector[citation needed] | |
Dell Streak[9] | 4 June 2010 | |
Boeing Black[10] | 2014.2Q[citation needed] |
PDMI pinout
Pin No. | Pin Name | Interface Grouping | Pin Description |
---|---|---|---|
1 | USB 5V | USB 2.0 Interface | USB Power (VBUS) |
2 | USB DGND | USB Ground | |
3 | USB D+ | Data + | |
4 | USB OTG | On‐The‐Go (allows device‐to‐device data transfer) | |
5 | USB D‐ | Data ‐ | |
6 | HC 5V | High Current Power (Output on Host) | High current 5V supply (1.8A, or 3.6A if combined with pin 15) |
7 | DGND / HC GND | High current Ground | |
8 | AUDIO RIGHT OUT | Analog Audio (Input on Host) | Right analog audio output (line level) |
9 | AUDIO LEFT OUT | Left analog audio output (line level) | |
10 | AUDIO OUT GND | Audio output ground | |
11 | CEC | CEC | Consumer Electronic Control, for HDMI remote control |
12 | SSR‐ | USB 3.0 Data Device Receive | USB 3.0 SSRX‐ signal |
13 | GND | Signal Ground | |
14 | SSR+ | USB 3.0 SSRX+ signal | |
15 | HC 5V | High Current Power ( Output from Host) | High current 5V supply (1.8A, or 3.6A if combined with pin 6) |
16 | HC GND | High current Ground | |
17 | SST‐ | USB 3.0 Data Device Transmit | USB 3.0 SSTX‐ signal |
18 | GND | Signal Ground | |
19 | SST+ | USB 3.0 SSTX+ signal | |
20 | HPD | DisplayPort v1.1a Interface, 2 Lane (Host is Sink, Device is Source) | Hot Plug Detect (includes interrupt function from host) |
21 | DAUX+ | AUX Channel + | |
22 | DAUX‐ | AUX Channel - | |
23 | AP | 3.3V DisplayPort Power (Power from portable device) | |
24 | D1‐ | Main Link Lane 1 (‐) | |
25 | GND | Signal Ground | |
26 | D1+ | Main Link Lane 1 (+) | |
27 | GND | Signal Ground | |
28 | D0‐ | Main Link Lane 0 (‐) | |
29 | GND | Signal Ground | |
30 | D0+ | Main Link Lane 0 (+) |
References
- ↑ CEA-2017, Common Inerconnection for Portable Media Players
- ↑ CEA-2017.1, Serial Communication Protocol for Portable Electronics Devices
- ↑ http://electronics.ihs.com/news/newsletters/2007/august/cea-2017-portable-media-connector.htm
- ↑ 8th MOST Interconnectivity Conference Japan (2007)
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
External links
- Purchase Standards
- CEA-2017 Rev A, Common Interconnection For Portable Media Players (PDMI), $75.
- CEA-2017.1 Rev 7, Serial Communication Protocol For Portable Electronic Devices, $156.
- Slides
- DisplayPort Technical Overview; Slides; May 2010, contains slides about PDMI
- Announcements