Erbium

Erbium,  ₆₈Er

General properties
Name, symbol	erbium, Er
Appearance	silvery white
Pronunciation	/ˈɜːrbiəm/ UR-bee-əm
Erbium in the periodic table
– ↑ Er ↓ Fm holmium ← erbium → thulium
Atomic number (Z)	68
Group, block	group n/a, f-block
Period	period 6
Element category	lanthanide
Standard atomic weight (±) (Ar)	167.259(3)
Electron configuration	[Xe] 4f12 6s2
per shell	2, 8, 18, 30, 8, 2
Physical properties
Phase	solid
Melting point	1802 K ​(1529 °C, ​2784 °F)
Boiling point	3141 K ​(2868 °C, ​5194 °F)
Density near r.t.	9.066 g/cm3
when liquid, at m.p.	8.86 g/cm3
Heat of fusion	19.90 kJ/mol
Heat of vaporization	280 kJ/mol
Molar heat capacity	28.12 J/(mol·K)
vapor pressure P (Pa) 1 10 100 1 k 10 k 100 k at T (K) 1504 1663 (1885) (2163) (2552) (3132)
Atomic properties
Oxidation states	3, 2, 1 ​(a basic oxide)
Electronegativity	Pauling scale: 1.24
Ionization energies	1st: 589.3 kJ/mol 2nd: 1150 kJ/mol 3rd: 2194 kJ/mol
Atomic radius	empirical: 176 pm
Covalent radius	189±6 pm
Miscellanea
Crystal structure	​hexagonal close-packed (hcp)
Speed of sound thin rod	2830 m/s (at 20 °C)
Thermal expansion	poly: 12.2 µm/(m·K) (r.t.)
Thermal conductivity	14.5 W/(m·K)
Electrical resistivity	poly: 0.860 µΩ·m (r.t.)
Magnetic ordering	paramagnetic at 300 K
Young's modulus	69.9 GPa
Shear modulus	28.3 GPa
Bulk modulus	44.4 GPa
Poisson ratio	0.237
Vickers hardness	430–700 MPa
Brinell hardness	600–1070 MPa
CAS Number	7440-52-0
History
Naming	after Ytterby (Sweden), where it was mined
Discovery	Carl Gustaf Mosander (1842)
Most stable isotopes of erbium
iso NA half-life DM DE (MeV) DP 160Er syn 28.58 h ε 0.330 160Ho 162Er 0.139% >1.4×1014 y (α) 1.6460 158Dy (β+β+) 1.8445 162Dy 164Er 1.601% – (α) 1.3041 160Dy (β+β+) 0.0241 164Dy 165Er syn 10.36 h ε 0.376 165Ho 166Er 33.503% – (α) 0.8309 162Dy 167Er 22.869% – (α) 0.6657 163Dy 168Er 26.978% – (α) 0.5527 164Dy 169Er syn 9.4 d β− 0.351 169Tm 170Er 14.910% >3.2×1017 y (α) 0.0502 166Dy (β−β−) 0.6536 170Yb 171Er syn 7.516 h β− 1.490 171Tm 172Er syn 49.3 h β− 0.891 172Tm
Decay modes in parentheses are predicted, but have not yet been observed

Erbium is a chemical element in the lanthanide series, with symbol Er and atomic number 68. A silvery-white solid metal when artificially isolated, natural erbium is always found in chemical combination with other elements on Earth. As such, it is a rare earth element which is associated with several other rare elements in the mineral gadolinite from Ytterby in Sweden, where yttrium, ytterbium, and terbium were discovered.

Erbium's principal uses involve its pink-colored Er³⁺ ions, which have optical fluorescent properties particularly useful in certain laser applications. Erbium-doped glasses or crystals can be used as optical amplification media, where erbium (III) ions are optically pumped at around 980 or 1480 nm and then radiate light at 1530 nm in stimulated emission. This process results in an unusually mechanically simple laser optical amplifier for signals transmitted by fiber optics. The 1550 nm wavelength is especially important for optical communications because standard single mode optical fibers have minimal loss at this particular wavelength.

In addition to optical fiber amplifier-lasers, a large variety of medical applications (i.e. dermatology, dentistry) rely on the erbium ion's 2940 nm emission (see Er:YAG laser), which is highly absorbed in water in tissues, making its effect very superficial. Such shallow tissue deposition of laser energy is helpful in laser surgery, and for the efficient production of steam which produces enamel ablation by common types of dental laser.

Characteristics

Physical properties

Erbium(III)chloride in sunlight, showing some pink fluorescence of Er⁺³ from natural ultraviolet.

A trivalent element, pure erbium metal is malleable (or easily shaped), soft yet stable in air, and does not oxidize as quickly as some other rare-earth metals. Its salts are rose-colored, and the element has characteristic sharp absorption spectra bands in visible light, ultraviolet, and near infrared. Otherwise it looks much like the other rare earths. Its sesquioxide is called erbia. Erbium's properties are to a degree dictated by the kind and amount of impurities present. Erbium does not play any known biological role, but is thought to be able to stimulate metabolism.

Erbium is ferromagnetic below 19 K, antiferromagnetic between 19 and 80 K and paramagnetic above 80 K.

Erbium can form propeller-shaped atomic clusters Er₃N, where the distance between the erbium atoms is 0.35 nm. Those clusters can be isolated by encapsulating them into fullerene molecules, as confirmed by transmission electron microscopy.

Chemical properties

Erbium metal tarnishes slowly in air and burns readily to form erbium(III) oxide:

4 Er + 3 O₂ → 2 Er₂O₃

Erbium is quite electropositive and reacts slowly with cold water and quite quickly with hot water to form erbium hydroxide:

2 Er (s) + 6 H₂O (l) → 2 Er(OH)₃ (aq) + 3 H₂ (g)

Erbium metal reacts with all the halogens:

2 Er (s) + 3 F₂ (g) → 2 ErF₃ (s) [pink]

2 Er (s) + 3 Cl₂ (g) → 2 ErCl₃ (s) [violet]

2 Er (s) + 3 Br₂ (g) → 2 ErBr₃ (s) [violet]

2 Er (s) + 3 I₂ (g) → 2 ErI₃ (s) [violet]

Erbium dissolves readily in dilute sulfuric acid to form solutions containing hydrated Er(III) ions, which exist as rose red [Er(OH₂)₉]³⁺ hydration complexes:

2 Er (s) + 3 H₂SO₄ (aq) → 2 Er³⁺ (aq) + 3 SO²⁻
₄ (aq) + 3 H₂ (g)

Isotopes

Main article: Isotopes of erbium

Naturally occurring erbium is composed of 6 stable isotopes, 162Er, 164Er, 166Er, 167Er, 168Er, and 170Er with 166Er being the most abundant (33.503% natural abundance). 29 radioisotopes have been characterized, with the most stable being 169Er with a half-life of 9.4 d, 172Er with a half-life of 49.3 h, 160Er with a half-life of 28.58 h, 165Er with a half-life of 10.36 h, and 171Er with a half-life of 7.516 h. All of the remaining radioactive isotopes have half-lives that are less than 3.5 h, and the majority of these have half-lives that are less than 4 minutes. This element also has 13 meta states, with the most stable being 167mEr with a half-life of 2.269 s.

The isotopes of erbium range in atomic weight from 142.9663 u (143Er) to 176.9541 u (177Er). The primary decay mode before the most abundant stable isotope, 166Er, is electron capture, and the primary mode after is beta decay. The primary decay products before 166Er are element 67 (holmium) isotopes, and the primary products after are element 69 (thulium) isotopes.

History

Erbium (for Ytterby, a village in Sweden) was discovered by Carl Gustaf Mosander in 1843. Mosander separated "yttria" from the mineral gadolinite into three fractions which he called yttria, erbia, and terbia. He named the new element after the village of Ytterby where large concentrations of yttria and erbium are located. Erbia and terbia, however, were confused at this time. After 1860, terbia was renamed erbia and after 1877 what had been known as erbia was renamed terbia. Fairly pure Er₂O₃ was independently isolated in 1905 by Georges Urbain and Charles James. Reasonably pure metal wasn't produced until 1934 when Klemm and Bommer reduced the anhydrous chloride with potassium vapor. It was only in the 1990s that the price for Chinese-derived erbium oxide became low enough for erbium to be considered for use as a colorant in art glass.

Occurrence

Monazite sand

The concentration of erbium in the Earth crust is about 2.8 mg/kg and in the sea water 0.9 ng/L. This concentration is enough to make erbium about 45th in elemental abundance in the Earth's crust.

Like other rare earths, this element is never found as a free element in nature but is found bound in monazite sand ores. It has historically been very difficult and expensive to separate rare earths from each other in their ores but ion-exchange chromatography methods developed in the late 20th century have greatly brought down the cost of production of all rare-earth metals and their chemical compounds.

The principal commercial sources of erbium are from the minerals xenotime and euxenite, and most recently, the ion adsorption clays of southern China; in consequence, China has now become the principal global supplier of this element. In the high-yttrium versions of these ore concentrates, yttrium is about two-thirds of the total by weight, and erbia is about 4–5%. When the concentrate is dissolved in acid, the erbia liberates enough erbium ion to impart a distinct and characteristic pink color to the solution. This color behavior is similar to what Mosander and the other early workers in the lanthanides would have seen in their extracts from the gadolinite minerals of Ytterby.

Production

Crushed minerals are attacked by hydrochloric or sulfuric acid that transforms insoluble rare-earth oxides into soluble chlorides or sulfates. The acidic filtrates are partially neutralized with caustic soda (sodium hydroxide) to pH 3–4. Thorium precipitates out of solution as hydroxide and is removed. After that the solution is treated with ammonium oxalate to convert rare earths into their insoluble oxalates. The oxalates are converted to oxides by annealing. The oxides are dissolved in nitric acid that excludes one of the main components, cerium, whose oxide is insoluble in HNO₃. The solution is treated with magnesium nitrate to produce a crystallized mixture of double salts of rare-earth metals. The salts are separated by ion exchange. In this process, rare-earth ions are sorbed onto suitable ion-exchange resin by exchange with hydrogen, ammonium or cupric ions present in the resin. The rare earth ions are then selectively washed out by suitable complexing agent. Erbium metal is obtained from its oxide or salts by heating with calcium at 1450 °C under argon atmosphere.

Applications

Erbium-colored glass

Erbium's everyday uses are varied. It is commonly used as a photographic filter, and because of its resilience it is useful as a metallurgical additive. Other uses:

• Used in nuclear technology in neutron-absorbing control rods.
• When added to vanadium as an alloy, erbium lowers hardness and improves workability.
• Erbium oxide has a pink color, and is sometimes used as a colorant for glass, cubic zirconia and porcelain. The glass is then often used in sunglasses and cheap jewelry.
• Erbium-doped optical silica-glass fibers are the active element in erbium-doped fiber amplifiers (EDFAs), which are widely used in optical communications. The same fibers can be used to create fiber lasers. In order to work efficiently, erbium-doped fiber is usually co-doped with glass modifiers/homogenizers, often aluminum or phosphorus. These dopants help prevent clustering or Er-ions and transfer the energy more efficiently between the Er ions and the signal. Co-doping of optical fiber with Er and Yb is used in high-power Er/Yb fiber lasers. Erbium can also be used in erbium-doped waveguide amplifiers.
• An erbium-nickel alloy Er₃Ni has an unusually high specific heat capacity at liquid-helium temperatures and is used in cryocoolers; a mixture of 65% Er₃Co and 35% Er_0.9Yb_0.1Ni by volume improves the specific heat capacity even more.
• A large variety of medical applications (i.e. dermatology, dentistry) utilize erbium ion's 2940 nm emission (see Er:YAG laser), which is highly absorbed in water (absorption coefficient about 12000/cm). Such shallow tissue deposition of laser energy is necessary for laser surgery, and the efficient production of steam for laser enamel ablation in dentistry.

Biological role

Erbium does not have a biological role, but erbium salts can stimulate metabolism. Humans consume 1 milligram of erbium a year on average. The highest concentration of erbium in humans is in the bones, but there is also erbium in the human kidneys and liver.

Toxicity

Erbium is slightly toxic if ingested, but erbium compounds are not toxic. Metallic erbium in dust form presents a fire and explosion hazard.

See also

• Erbium compounds
• Terbium
• Ytterbium
• Yttrium

Further reading

• Guide to the Elements – Revised Edition, Albert Stwertka (Oxford University Press; 1998), ISBN 0-19-508083-1.

External links

• WebElements.com – Erbium (also used as a reference)
• It's Elemental – Erbium