Transport in Australia

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

File:GA20891.pdf There are many forms of transport in Australia. Australia is highly dependent on road transport. There are more than 300 airports with paved runways. Passenger rail transport includes widespread commuter networks in the major capital cities with more limited intercity and interstate networks. The Australian mining sector is reliant upon rail to transport its product to Australia's ports for export.

Roads

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Main article: Road transport in Australia
The Eastern Freeway, Melbourne. Facing inbound.
Hume Highway near Albury

Road transport is an essential element of the Australian transport network, and an enabler of the Australian economy. There is a heavy reliance on road transport due to Australia's large area and low population density in considerable parts of the country.[1]

Another reason for the reliance upon roads is that the Australian rail network has not been sufficiently developed for a lot of the freight and passenger requirements in most areas of Australia. This has meant that goods that would otherwise be transported by rail are moved across Australia via road trains. Almost every household owns at least one car, and uses it most days.[2]

Australia has the second highest level of car ownership in the world. It has three to four times more road per capita than Europe and seven to nine times more than Asia. Australia also has the third highest per capita rate of fuel consumption in the world. Melbourne is the most car-dependent city in Australia, according to a data survey in the 2010s. Having over 110,000 more cars driving to and from the city each day than Sydney. Perth, Adelaide and Brisbane are rated as being close behind. All these capital cities are rated among the highest in this category in the world (car dependency).[3] The distance travelled by car (or similar vehicle) in Australia is among the highest in the world, being exceeded by USA and Canada.[1]

There are 3 different categories of Australian roads. They are federal highways, state highways and local roads. The road network comprises a total of 913,000 km broken down into:[4]

  • paved: 353,331 km (including 3,132 km of expressways)
  • unpaved: 559,669 km (1996 estimate)

Victoria has the largest network, with thousands of arterial (major, primary and secondary) roads to add.

The majority of road tunnels in Australia have been constructed since the 1990s to relieve traffic congestion in metropolitan areas, or to cross significant watercourses.

Public transport in Australia

Rising petrol prices and increasing traffic congestion are thought to be factors contributing to renewed growth in use of urban public transport.[5]

Melbourne trams outside Flinders Street railway station
Epping station on the Sydney Trains network.
Opal and Myki smartcard ticketing used for travel in Sydney and Melbourne

Commuter rail

Sydney, Melbourne, Brisbane, Perth and Adelaide have extensive electric commuter rail networks which have grown and expanded over time. Australian commuter rail typically operates with bidirectional all day services with Sydney and Melbourne's systems operating with much higher frequencies, particularly in their underground cores. Sydney Trains operates the busiest system in the country with approximately 1 million trips per day. Melbourne Metro operates a larger system albeit with a lower number of trips.

Trams and light rail

Trams have historically operated in many Australian towns and cities, with the majority of these being shut down before the 1970s in the belief that more widespread car ownership would render them unnecessary. Melbourne is a major exception and today has the largest tram network of any city in the world. Adelaide has also retained one tram service - the Glenelg Tram that runs from Adelaide City Centre to Glenelg Beach. Trams had operated in a number of major regional cities including Launceston, Geelong, Ballarat, Bendigo and Rockhampton.

Light Rail was constructed in Sydney in the 1990s with the conversion of a disused section of the Metropolitan Goods railway line into what is now the Dulwich Hill Line. A second CBD and South East Light Rail line is currently under construction and is due to open in 2019. Light rail has also been built on the Gold Coast and is in the planning stages for Newcastle Canberra and Perth.

Rapid transit

Major cities in Australia do not have full-fledged rapid transit systems. Melbourne, Sydney, Brisbane and Perth's commuter systems are all partially underground. Melbourne has plans for a new train service branded as a metro, but as it will interact with the suburban system and won't be grade-separated from Footscray out, it will fall short of the criteria of a metro.

The driverless Sydney Metro system is currently under construction, with the first line to be the North West Rail Link. This new line will connect to the existing Epping to Chatswood railway line, which will be converted to rapid transit standards. It was also announced by Premier Mike Baird on 10 June 2014 that a stage 2 extension will continue from Chatswood, through a second harbour crossing, the city centre, and onto the current Bankstown Line.[6] The North West Rail Link will be the first rapid transit system in an Australian city.

Intra-city public transport networks

The following table presents an overview of multi-modal intra-city public transport networks in Australia's larger cities. The only Australian capital cities without multi-modal networks are Canberra and Darwin, which rely entirely on buses. Canberra is planning a light rail line (Capital Metro), which will link with existing bus services, and is expected to be operational in 2018.[7]The table does not include tourist or heritage transport modes (such as the private monorail at Sea World or the tourist Victor Harbor Horse Drawn Tram).

City Overview Integrated Network Name Buses Urban rail[8] Light rail[9] Monorail Watercraft[10] Rapid transit
Adelaide Public transport in Adelaide Adelaide Metro Yes Yes Yes
Brisbane Public transport in Brisbane Translink Yes Yes Yes
Canberra Public transport in Canberra Yes PlannedP1
Darwin Public transport in Darwin Yes Limited
Gold Coast Public transport on the Gold Coast Translink Yes Yes Yes Yes
Hobart Transport in Hobart Metro Yes Yes
Melbourne Public transport in Melbourne Public Transport Victoria Yes Yes Yes Limited
Newcastle Transport in Newcastle "Transport" Yes Limited PlannedP2 Limited
Perth Public transport in Perth Transperth Yes Yes PlannedP3 Yes
Sydney Public transport in Sydney Transport for NSW Yes Yes Yes CeasedC1 Yes Under constructionP4

Notes

Intercity rail transport

Map of passenger railway services in Australia
State Government owned rail services:
  Queensland Rail City network and Traveltrain services
  NSW TrainLink services
  V/Line services
  Transwa services
Great Southern Rail lines:
  Indian Pacific
  The Overland
  The Ghan
Looking along the Trans-Australian Railway
The Indian Pacific in Perth

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Main articles: Rail transport in Australia and History of rail transport in Australia

The railway network is large, comprising a total of 33,819 km (2,540 km electrified) of track: 3,719 km broad gauge, 15,422 km standard gauge, 14,506 km narrow gauge and 172 km dual gauge. Rail transport started in the various colonies at different dates. Privately owned railways started the first lines, and struggled to succeed on a remote, huge, and sparsely populated continent, and government railways dominated. Although the various colonies had been advised by London to choose a common gauge, the colonies ended up with different gauges.

Inter-state rail services

The Great Southern Rail, operates three trains: the Indian Pacific (Sydney-Adelaide-Perth), The Ghan (Adelaide-Alice Springs-Darwin) and The Overland (Melbourne-Adelaide).[12] NSW owned NSW TrainLink services link Brisbane, Canberra and Melbourne to Sydney. Since the extension of the Ghan from Alice Springs to Darwin was completed in 2004, all mainland Australian capital cities are linked by standard gauge rail, for the first time.

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

See also: High-speed rail in Australia

Intra-state and city rail services

There are various state and city rail services operated by a combination of government and private entities, the most prominent of these include V/Line (regional trains and coaches in Victoria); Metro Trains Melbourne (suburban services in Melbourne); NSW TrainLink (regional trains and coaches in New South Wales); Sydney Trains (suburban services in Sydney); Queensland Rail (QR) operating long distance Traveltrain services and the City network in South-East Queensland, and Transwa operating train and bus services in Western Australia.

In Tasmania, 'TasRail' operates a short haul narrow gauge freight system, that carries inter-modal and bulk mining goods. TasRail is government owned (by the State of Tasmania) and is going through a significant below and above rail upgrades with new locomotives and wagons entering service. Significant bridge and sleeper renewal has also occurred. The Tasmanian Government also operates the 'West Coast Wilderness Railway' as a tourist venture over an isolated length of track on Tasmania's West Coast.

Mining railways

Four heavy-duty mining railways carry iron ore to ports in the northwest of Western Australia. These railways carry no other traffic, and are isolated by deserts from all other railways. The lines are standard gauge and are built to the heaviest US standards.

In 2006, a fifth iron ore railway is proposed by the Fortescue Metals Group, while a sixth common carrier railway is proposed to serve the port of Oakajee just north of Geraldton.

Cane railways

In Queensland about 15 sugar mills have narrow gauge (2 ft/​610 mm gauge) cane tramways that deliver sugar cane to the mills.

Pipelines

There are several pipeline systems including:

Projects under construction or planned:
Victoria

  • Goulburn River to Sugarloaf Reservoir, Melbourne (North-South Pipeline, alternatively called the Sugarloaf Pipeline) - was connected to Melbourne in February 2010.[13]
  • Wimmera-Mallee Pipeline - construction commenced in November 2006 and was completed in April 2010.[14]
  • Melbourne to Geelong Pipeline - construction was completed in March 2012.[15]
  • Rocklands Reservoir to Grampian Headworks Pipeline (Hamilton - Grampians Pipeline) - construction commenced December 2008, expected completion in 2010.

Waterways

Between 1850 and 1940 paddle steamers were used extensively on the Murray-Darling Basin to transport produce, especially wool and wheat, to river ports such as Echuca, Mannum and Goolwa. However, the water levels of the inland waterways are highly unreliable, making the rivers impassable for large parts of the year. A system of locks was created largely to overcome this variability but the steamers were unable to compete with rail, and later, road transport. Traffic on inland waterways is now largely restricted to private recreational craft.[16]

Ports and harbours

A Sydney ferry.
Total employment in the water transport sector (thousands of people) since 1984

Mainland

General

Iron ore

Tasmania

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

See also: List of Australian ports

Merchant marine vessels

A container crane and ship at the Port of Melbourne.

In 2006, the Australian fleet consisted of 53 ships of 1,000 gross register tons or over. The use of foreign registered ships to carry Australian cargoes between Australian ports is permitted under a permit scheme, with either Single Voyage Permit (SVP) or a Continuous Voyage Permit (CVP) being issued to ships.[17] Between 1996 and 2002 the number of permits issued has increased by about 350 per cent.[18]

Over recent years the number of Australian registered and flagged ships has greatly declined, from 75 ships in 1996 to less than 40 in 2007, by 2009 the number is now approaching 30. Marine unions blame the decline on the shipping policy of the Howard Government which permitted foreign ships to carry coastal traffic.[19]

There have also been cases where locally operated ships have Australian flag from the vessel, registering it overseas under a flag of convenience, then hiring foreign crews who earn up to about half the monthly rate of Australian sailors.[18] Such moves were supported by the Howard Government but opposed by maritime unions and the Australian Council of Trade Unions.[20] The registration of the ships overseas also meant the earnings of the ships are not subject to Australian corporate taxation laws.[19]

Statistics for the shipping industry of Australia
Total: 53 ships (1,000 gross register tons (GRT) or over)
Totalling: 1,361,000 GRT/1,532,874 metric tons deadweight (DWT)
Cargo ships
Bulk ships 17
Cargo ship 4
Container ships 1
Roll-on / roll-off ships 5
Tankers
Liquefied gas tanker ships 4
Chemical tanker ships 3
Petroleum tanker ships 6
Passenger ships
General passenger ships 6
Combined passenger/cargo 7
Source: This article contains material from the CIA World Factbook which, as a US government publication, is in the public domain.

Aviation

Total monthly arrivals to Australia since 1976

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Main article: List of Australian airports

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Further information: List of the busiest airports in Australia
Melbourne Airport
Sydney Airport
Qantas Airbus A380

taking off]]

Major Australian airlines operating domestic routes are:

There are many airports around Australia paved or unpaved. A 2004 estimate put the number of airports at 448. The busiest airports in Australia are:

  1. Sydney Airport Sydney, New South Wales SYD
  2. Melbourne Airport Melbourne, Victoria MEL
  3. Brisbane Airport Brisbane, Queensland BNE
  4. Perth Airport Perth, Western Australia PER
  5. Adelaide Airport Adelaide, South Australia ADL
  6. Gold Coast Airport Gold Coast, Queensland OOL
  7. Cairns Airport Cairns, Queensland CNS
  8. Canberra International Airport Canberra, Australian Capital Territory CBR
  9. Hobart International Airport Hobart, Tasmania HBA
  10. Darwin International Airport, Northern Territory DRW
  11. Townsville International Airport Townsville, Queensland TSV

Airports with paved runways

There are 305 airports with paved runways:

  • Over 3,047 m (10,000 ft): 10
  • 2,438 to 3,047 m (8,000 to 10,000 ft): 12
  • 1,524 to 2,437 m (5,000 to 8,000 ft): 131
  • 914 to 1,523 m (3,000 to 5,001 ft): 139
  • Under 914 m (3,000 ft): 13 (2004 estimate)

Airports with unpaved runways

There are 143 airports with paved runways:

  • 1,524 to 2,437 m (5,000 to 8,000 ft): 17
  • 914 to 1,523 m (3,000 to 5,000 ft): 112
  • Under 914 m (3,000 ft): 14 (2004 estimate)

Note:

sourced from CIA World Fact Book https://www.cia.gov/library/publications/the-world-factbook/index.html

Environmental impact

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Main article: Environmental impact of transport in Australia

The environmental impact of transport in Australia is considerable. In 2009, transport emissions made up 15.3% of Australia's total greenhouse gas emissions. Between 1990 and 2009, transport emissions grew by 34.6%, the second-highest growth rate in emissions after stationary energy.[21]

Australia subsidizes fossil fuel energy, keeping prices artificially low and raising greenhouse gas emissions due to the increased use of fossil fuels as a result of the subsidies[citation needed]. The Australian Energy Regulator and state agencies such as the New South Wales' Independent Pricing and Regulatory Tribunal set and regulate electricity prices, thereby lowering production and consumer cost.

See also

References

  1. ↑ 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found. Cite error: Invalid <ref> tag; name "transtats" defined multiple times with different content
  2. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Urban Australia: Where most of us live. CSIRO. Retrieved on 15 July 2012.
  4. ↑ CIA world fact book.
  5. ↑ Use of urban public transport in Australia. Australian Bureau of Statistics. Retrieved on 15 July 2012.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Includes electrified networks only
  9. ↑ includes modern tram networks
  10. ↑ includes public ferry and Water taxi services
  11. ↑ Major milestones reached on North West Rail Link as preferred operator selected, Transport for New South Wales, Retrieved 24 June 2014
  12. ↑ http://www.gsr.com.au/trains.htm
  13. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  16. ↑ Ian Mudie Riverboats Sun Books, Melbourne, Victoria 1965
  17. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  18. ↑ 18.0 18.1 Lua error in package.lua at line 80: module 'strict' not found.
  19. ↑ 19.0 19.1 Lua error in package.lua at line 80: module 'strict' not found.
  20. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  21. ↑ Lua error in package.lua at line 80: module 'strict' not found.

Sources

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Transport_in_Australia&oldid=45525"