Stabilization pond

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
File:Schematic of the Waste Stabilization Pond (WSP).jpg
Schematic of Waste Stabilization Ponds (WSPs): They are large, man-made water bodies and can be used individually, or linked in a series for improved treatment. There are three types of ponds, (1) anaerobic, (2) facultative and (3) aerobic (maturation), each with different treatment and design characteristics.[1]

Stabilization ponds (also called lagoons or waste stabilization ponds) use a natural process for wastewater treatment that employs a combination of macrophytic plants, substrates and microorganisms in a more or less artificial pond to treat wastewater. The technique is frequently used to treat municipal wastewater, industrial effluent, municipal run-off or stormwater. After treatment, the effluent may be returned to surface water or reused as irrigation water (or reclaimed water) if the effluent quality is high enough.

Stabilization ponds are commonly used for wastewater treatment in developing countries. Types of treatment ponds include anaerobic lagoons, facultative pond and aerated lagoons.

Technology

File:Stabilization pond.jpg
Stabilization pond

Stabilization ponds consist of shallow man-made basins comprising a single or several series of anaerobic, facultative or maturation ponds.[2] The primary treatment takes place in the anaerobic pond, which is mainly designed for removing suspended solids, and some of the soluble element of organic matter (BOD). During the secondary stage in the facultative pond most of the remaining BOD is removed through the coordinated activity of algae and heterotrophic bacteria. The main function of the tertiary treatment in the maturation pond is the removal of pathogens and nutrients (especially nitrogen).

Removal of pathogens

A study of ten stabilization ponds in Honduras has shown that they were effective in removing helminth eggs, a pathogen, from the effluent and to satisfy the World Health Organization microbiological guidelines for Category B irrigation with wastewater effluent. However, sludge from all ponds was heavily contaminated with helminth eggs.[3]

Application and suitability

Stabilization ponds are particularly well suited for tropical and subtropical countries because the intensity of the sunlight and temperature are key factors for the efficiency of the removal processes. [4] It is also recommended by the WHO for the treatment of wastewater for reuse in agriculture and aquaculture, especially because of its effectiveness in removing nematodes (worms) and helminth eggs.[5]

Stabilization ponds, as described here, use no aerators. High-performance lagoon technology with aerators has much more in common with that of activated sludge. Such aerated lagoons are common in small towns in the United States, among other places.[6]

Cost considerations

Stabilization ponds are widely regarded as the most cost-effective wastewater treatment technology for the removal of pathogenic micro-organisms.[7] A World Bank study carried out in Sana’a, Yemen, in 1983 makes a detailed economic comparison of waste stabilization ponds, aerated lagoons, oxidation ditches and trickling filters. According to this study, stabilization pond technology is a cheaper option up to a land cost of US$ 7.8/m2. Above this cost, oxidation ditches become the cheapest option.[8] However, often the main constraint against selecting this technology is not land cost but land availability. If land is available, stabilization ponds have the advantage of very low operating costs since they use no energy compared to other wastewater treatment technologies.

Use

Stabilization ponds are used for municipal waste water treatment in many countries with ample sunshine, including Colombia, El Salvador, Guatemala, Honduras, Israel, Jordan, Morocco, Nicaragua, Tunisia and Uganda.[9] They are typically used in smaller towns where land availability and cost is less of a constraint. In some cities larger stabilization ponds have been replaced in the early 2000s by activated sludge waste water treatment plants, such as in Amman (Jordan) and in Adelaide (Australia) in 2004.[10]

See also

References

  1. ↑ Tilley, E., Ulrich, L., Lüthi, C., Reymond, Ph., Zurbrügg, C. (2014) Compendium of Sanitation Systems and Technologies - (2nd Revised Edition). Swiss Federal Institute of Aquatic Science and Technology (Eawag), Duebendorf, Switzerland. ISBN 978-3-906484-57-0.
  2. ↑ Design and Performance of Waste Stabilization Ponds, Hamzeh H. Ramadan & Victor M. Ponce
  3. ↑ Stewart M. Oakley, Department of Civil Engineering, California State University:The Need for Wastewater Treatment in Latin America: A Case Study of the Use of Wastewater Stabilization Ponds in Honduras, Small Flows Quarterly Juried Article, Spring 2005, Volume 6, Number 2
  4. ↑ IRC Waste stabilization ponds for wastewater treatment, May 2004, prepared by Cinara, Colombia
  5. ↑ WHO: Guidelines for the safe use of wastewater, excreta and greywater
  6. ↑ Lagoons online
  7. ↑ IRC Waste stabilization ponds for wastewater treatment, May 2004, prepared by Cinara, Colombia
  8. ↑ Arthur, J.P. (1983). Notes on the design and operation of waste stabilization ponds in warm climates of developing countries. Technical paper No 7. Washington D.C
  9. ↑ OAKLEY S. M.; POCASANGRE A.; FLORES C.; MONGE J.; ESTRADA M.: Waste stabilization pond use in Central America : The experiences of El Salvador, Guatemala, Honduras and Nicaragua, Water Science and Technology 2000, vol. 42, no 10-11, pp. 51-58
  10. ↑ South Australia Water

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Stabilization_pond&oldid=718173196"