List of unusual units of measurement

For units of measure primarily used in countries where English is not the main language, see the article specific to that country, a list of which can be found in the systems of measurement article.

For unusual units of measure invented primarily for amusement, see List of humorous units of measurement.

An unusual unit of measurement is a unit of measurement that does not form part of a coherent system of measurement; especially in that its exact quantity may not be well known or that it may be an inconvenient multiple or fraction of base units in such systems. This definition is deliberately not exact since it might seem to encompass units such as the week or the light-year which are quite "usual" in the sense they are often used; if they are used out of context, they may be "unusual", as demonstrated by the Furlong/Firkin/Fortnight (FFF) system of units.

Length

Rack unit

A typical section of rack rail, showing rack unit distribution.

Main article: Rack unit

One rack unit (U) is 1.75 inches (44.45 mm) and is used to measure rack-mountable audiovisual and computing equipment. Rack units are typically denoted without a space between the number of units and the 'U'. Thus a 4U server enclosure (case) is seven inches (177.8 mm) high.

Hand

Main article: Hand (unit)

The hand is a non-SI unit of length equal to exactly 4 inches (101.6 mm). It is normally used for the measurement of the height of horses in some English-speaking countries, including Australia, Canada, the United Kingdom, and the United States.

Light-nanosecond

See also: Light-foot

The light-nanosecond was popularized as a unit of distance by Grace Hopper as the distance which a photon could travel in one thousand-millionth of a second (roughly 30 cm or one foot): "The speed of light is one foot per nanosecond." In her speaking engagements, she was well known for passing out light-nanoseconds of wire to the audience, and contrasting it with light-microseconds (a coil of wire 1,000 times as long) and light-picoseconds (the size of ground black pepper). Over the course of her life, she found many uses for this visual aid, including demonstrating the waste of sub-optimal programming, illustrating advances in computer speed, and simply giving young scientists and policy makers the ability to conceptualize the magnitude of very large and small numbers.

Metric foot

A metric foot (defined as 300 mm) has been used occasionally in the UK but has never been an official unit.

Horse

Main article: Horse length

Horses are used to measure distances in horse racing – a horse length (shortened to merely a length when the context makes it obvious) equals roughly 8 feet or 2.4 metres. Shorter distances are measured in fractions of a horse length; also common are measurements of a full or fraction of a head, a neck, or a nose. "Neck and neck" is an example of a linguistic Siamese twin which refers to the neck as a unit of measurement in horse racing.

Car

In car driving tests in the UK and elsewhere, braking distances can be given in metres or in car lengths (with a car for this purpose being typically around 4 m or 13 ft long). New drivers trying to pass a driving test in the UK have to know in metres how far it takes to stop a car travelling at so-many miles per hour. A "car length" or "length" is also a common unit for estimating the distance between two cars in auto racing.

Football field (length)

An American football field is 160 ft (53 yd; 49 m) wide and 360 ft (120 yd; 110 m) long, including two 10 yd (9.1 m) long end zones.

A Canadian football field is 65 yd (59 m) wide and 150 yd (140 m) long, including two 20 yd (18 m) long end zones.

Media in the UK also use the football pitch as a unit of length, although the area of the association football pitch is not fixed, but may vary within limits of 90–120 m (98–131 yd) in length and in width. The usual size of a football pitch is 105 m × 68 m (115 yd × 74 yd), the dimensions used for matches in the UEFA Champions League.

Block

A city block (in most US cities) is between ​¹⁄₁₆ and ​¹⁄₈ mi (100 and 200 m). In Manhattan, the measurement "block" usually refers to a north-south block, which is ​¹⁄₂₀ mi (80 m). Sometimes people living in cities with a regularly spaced street grid will speak of long blocks and short blocks. Within a typical large North American city, it is often only possible to travel along east-west and north-south streets, so travel distance between two points is often given in the number of blocks east-west plus the number north-south (known to mathematicians as the Manhattan Metric).

Tall buildings

The Empire State Building is taller than 4 American football fields stood on end, including their end zones.

See also: List of tallest buildings and structures in the world

In the US, buildings such as the Empire State Building (449 m or 1,473 ft), Sears Tower (519 m or 1,703 ft), and Seattle Space Needle (184 m or 604 ft) are used as comparative measurements of height, as are the Statue of Liberty and Washington Monument. The Empire State Building (but not the others mentioned) is also used in Britain for describing particularly large or tall objects. Before the September 11 attacks, the World Trade Center towers were frequently used in the same fashion.

In France, the Eiffel Tower (324 m or 1,063 ft), and the UK, Nelson's Column (52 m or 171 ft), Blackpool Tower (158 m or 518 ft), Big Ben (officially the Elizabeth Tower: 96.3 m or 316 ft), and St Paul's Cathedral (108 m or 354 ft) are commonly used by British newspapers or reference books to give the comparative heights of buildings or, occasionally, mountains.

In Canada (and occasionally elsewhere), the Toronto CN Tower (553 m or 1,814 ft) is used as a unit of length.

The Earth's circumference

The circumference of a great circle of the Earth (about 40,000 km or 25,000 mi or 22,000 nmi) is often compared to large distances. For example, one might say that a large number of objects laid end-to-end at the equator "would circle the Earth four and a half times". According to WGS-84, the circumference of a circle through the poles (twice the length of a meridian) is 40,007,862.917 metres (43,753,130.924 yd) and the length of the equator is 40,075,016.686 metres (43,826,571.179 yd). Despite the fact that the difference (0.17%) between the two is insignificant at the low precision that these quantities are typically given to, it is nevertheless often specified as being at the equator.

The definitions of both the nautical mile and the kilometre were originally derived from the Earth's circumference as measured through the poles. The nautical mile was defined as a minute of arc of latitude measured along any meridian. A circle has 360 degrees, and each degree is 60 minutes, so the nautical mile was defined as ​¹⁄_21,600 of the Earth's circumference, or about 1,852.22 metres. However, by international agreement, it is now defined to be exactly 1,852 metres (6,076 ft).

The kilometre was originally defined as ​¹⁄_10,000 of the distance from a pole to the equator, or as ​¹⁄_40,000 of the Earth's circumference as measured through the poles. This definition would make the kilometre's length approximately 1,000.197 metres, whereas it is exactly 1,000 metres (3,280.84 ft).

Earth-to-Moon distance

The distance between the Earth's and the Moon's surfaces is, on average, approximately 380,000 km or 240,000 miles. This distance is sometimes used in the same manner as the circumference of the Earth; that is, one might say that a large number of objects laid end-to-end "would reach all the way to the Moon and back two-and-a-half times".

The abbreviation for the Earth-to-Moon distance is "LD" which stands for "Lunar Distance", used in astronomy to express close approaches of Earth by minor planets.

Siriometer

The siriometer is a rarely used astronomical measure equal to one million astronomical units, i.e., one million times the average distance between the Sun and Earth. This distance is equal to about 15.8 light-years, 149.6 Pm or 4.8 parsecs, and is about twice the distance from Earth to the star Sirius.

Area

Barn

Main article: Barn (unit)

One barn is 10⁻²⁸ square metres, about the cross-sectional area of a uranium nucleus. The name probably derives from early neutron-deflection experiments, in which the uranium nucleus was described, comparatively, as being "big as a barn". Additional units include the microbarn (or "outhouse") and the yoctobarn (or "shed").

Brass

One brass is 100 square feet (9.3 m²) area (used in measurement of work done or to be done, such as plastering, painting, etc.). It is also equal, however, to 100 cubic feet (2.8 m³) of estimated or supplied loose material, such as sand, gravel, rubble, etc. This unit is prevalent in construction industry in India.

Square

The square is an Imperial unit of area that is used in the construction industry in North America, and was historically used in Australia by real estate agents. One square is equal to 100 square feet (9.29 m²). A roof's area may be calculated in square feet, then converted to squares.

Cow's grass

In Ireland, before the 19th Century, a "cow's grass" was a measurement used by farmers to indicate the size of their fields. A cow's grass was equal to the amount of land that could produce enough grass to support a cow.

A variation called a "cow field" is still often used in the British Channel Islands, particularly Guernsey where classified advertisements in the local newspaper (Guernsey Press) for land can be seen referring to "A plot of land measuring X cow fields". This is probably still used because an acre of land in Guernsey is rather unusual due to the small size of the island and therefore a cow-field is a more suitable unit of measurement.

Football field (area)

On this schema, an association football field is used to help to conceptualize the size of a polo field.

A football pitch, or field, can be used as a man-in-the-street unit of area. The standard FIFA football pitch is 105 m (344 ft) long by 68 m (223 ft) wide (7,140 m² or 0.714 ha or 1.76 acres); FIFA allows for a variance of up to 5 m (16 ft) in length and 4 m (13 ft) in width in either direction (and even larger discretions if the pitch is not used for international competition), which generally results in the association football pitch generally only being used for order of magnitude comparisons.

An American football field, including both end zones, is 360 by 160 ft (120.0 by 53.3 yd; 109.7 by 48.8 m), or 57,600 square feet (5,350 m²) (0.535 hectares or 1.32 acres). A Canadian football field is 65 yards (59 m) wide and 110 yards (100 m) long with end zones adding a combined 40 yards (37 m) to the length, making it 87,750 square feet (8,152 m²) or 0.8215 ha (2.030 acres)

An Australian rules football field may be approximately 150 metres (160 yd) (or more) long goal to goal and 135 metres (148 yd) (or more) wide, although the field's elliptical nature reduces its area to a certain extent. A 150-by-135-metre (164 by 148 yd) football field has an area of approximately 15,900 m² (1.59 ha; 3.9 acres), twice the area of a Canadian football field and three times that of an American football field.

Morgen

Main article: Morgen

A morgen ("morning" in Dutch) was approximately the amount of land tillable by one man behind an ox in the morning hours of a day. This was an official unit of measurement in South Africa until the 1970s, and was defined in November 2007 by the South African Law Society as having a conversion factor of 1 Morgen = 0.856532 hectares. This unit of measure was also used in the Dutch colonial province of New Netherland (later New York and parts of New England).

Countries, regions, and cities

Wales (red) in the UK (pink)

The area of a familiar country, state or city is often used as a unit of measure, especially in journalism.

Wales

Equal to 20,779 km² (8,023 sq mi), the country of Wales is used in phrases such as "an area the size of Wales" or "twice the area of Wales". England is 6.275 times the size of Wales, and Scotland is roughly four times the size of Wales. Ireland is four times larger than Wales, and France is about twenty-five times larger.

In older British and Commonwealth atlases, it was common to show a known area at the same scale, and the usual area to show was either Wales for smaller scales, or Great Britain for larger areas.

The British comedy show The Eleven O'Clock Show parodied the use of this measurement, by introducing a news article about an earthquake in Wales, stating that an area the size of Wales was affected. The Radio 4 programme More or Less introduced the idea of "kilowales" – an area 1,000 times the size of Wales. The Register introduced the nanowales (20.78 m²).

The measurement has been adopted by rainforest conservation charity Size of Wales, aiming to conserve an area of rainforest equating to the area of Wales. On 1 March 2013, the charity announced that they had succeeded in conserving an area of rainforest the size of Wales and will continue to operate to sustain and increase the protected area.

The United States

In the United States the area of the smallest state, Rhode Island (1,545 sq mi or 4,000 km²), the largest of the contiguous 48 states, Texas (268,601 sq mi or 695,670 km²), and, less commonly, Alaska (656,425 sq mi or 1,700,130 km²) are used in a similar fashion. Antarctica's Larsen B ice shelf was approximately the size of Rhode Island until it broke up in 2002. In the 1979 movie The China Syndrome, radiation is expected to contaminate "an area the size of Pennsylvania". Any state may be used in this fashion to describe the area of another country.

The US Central Intelligence Agency uses Washington, D.C. (61.4 sq mi or 159 km²) as a comparison for city-sized objects.

Other countries

In the Netherlands, its smallest province, Utrecht (1,386 km² or 535 sq mi), is often used as a comparison for regions in general.

In Russia, France (551,695 km² or 213,011 sq mi) is often used as a comparison for regions of Siberia. This was so popular in the Soviet era that the phrase "как две Франции" (twice the size of France) became a stock phrase to denote any large area.

The country of Belgium (30,528 km² or 11,787 sq mi) has also often been used when comparing areas, to the point where it has been regarded as a meme and where there is a website dedicated to notable areas which have been compared to that of Belgium.

The Isle of Wight (380 km² or 147 sq mi), an island off the south coast of mainland England, is commonly used to define smaller areas.

In Denmark:

• The island of Bornholm (588 square kilometers) is often used to describe the size of an area.
• The Rundetårn (roughly 56 meters high) in Copenhagen is used in the media to refer to units of length.

In Germany, the Saarland (2,569.69 km² or 992.16 sq mi) is often used to define areas.

In Brazil, it is common to compare relatively small areas to the state of Sergipe, the smallest in the country. Smaller areas are sometimes compared to the cities of São Paulo or Rio de Janeiro.

Volume

Metric ounce

A metric ounce is an approximation of the imperial ounce, US dry ounce, or US fluid ounce. These three customary units vary. However, the metric ounce is usually taken as 25 or 30 ml when volume is being measured, or grams when mass is being measured.

The US Food and Drug Administration (FDA) defines the "food labeling ounce" as 30 ml, slightly larger than the 29.6 ml fluid ounce.

Shot

Main article: Shot glass

Three shot glasses of varying shape and size

The shot is a liquid volume measure that varies from country to country and state to state depending on legislation. It is routinely used for measuring strong liquor or spirits when the amount served and consumed is smaller than the more common measures of alcoholic "drink" and "pint". There is a legally defined maximum size of a serving in some jurisdictions. The size of a "single" shot is 20–60 ml (0.70–2.11 imp fl oz; 0.68–2.03 US fl oz). The smaller "pony" shot is 20–30 ml (0.70–1.06 imp fl oz; 0.68–1.01 US fl oz). According to Encyclopædia Britannica Almanac 2009, a pony is 0.75 fluid ounces of liquor. According to Wolfram Alpha, one pony is 1 U.S. fluid ounce. "Double" shots (surprisingly not always the size of two single shots, even in the same place) are 40–100 ml (1.4–3.5 imp fl oz; 1.4–3.4 US fl oz). In the UK, spirits are sold in shots of either 25 ml (approximating the old fluid ounce) or 35 ml.

Board foot or super foot

Main article: Board foot

A board foot is a United States and Canadian unit of volume, used for lumber. It is equivalent to 1 inch × 1 foot × 1 foot (144 cu in or 2,360 cm³). It is also found in the unit of density pounds per board foot. In Australia and New Zealand the terms super foot or superficial foot were formerly used for this unit.

Hoppus foot

A system of measure for timber in the round (standing or felled), now largely superseded by the metric system except in measuring hardwoods in certain countries. Its purpose is to estimate the value of sawn timber in a log, by measuring the unsawn log and allowing for wastage in the mill. Following the so-called "quarter-girth formula" (the square of one quarter of the circumference in inches multiplied by ​¹⁄₁₄₄ of the length in feet), the notional log is four feet in circumference, one inch of which yields the hoppus board foot, 1 foot yields the hoppus foot, and 50 feet yields a hoppus ton. This translates to a hoppus foot being equal to 1.273 cubic feet (2,200 in³; 0.0360 m³). The hoppus board foot, when milled, yields about one board foot. The volume yielded by the quarter-girth formula is 78.54% of cubic measure (i.e. 1 ft³ = 0.7854 h ft; 1 h ft = 1.273 ft³).

Cubic ton

Main article: Cubic ton

A cubic ton is an antiquated measure of volume, varying based on the commodity from about 16 to 45 cu ft (0.45 to 1.27 m³). It is now only used for lumber, for which one cubic ton is equivalent to 40 cu ft (1.1 m³).

Cord and rick

A cord of wood

Main article: Cord (unit)

The cord is a unit of measure of dry volume used in Canada and the United States to measure firewood and pulpwood. A cord is the amount of wood that, when "ranked and well stowed" (arranged so pieces are aligned, parallel, touching and compact), occupies a volume of 128 cubic feet (3.62 m³). This corresponds to a well-stacked woodpile, 4 feet deep by 4 feet high by 8 feet wide (122 cm × 122 cm × 244 cm), or any other arrangement of linear measurements that yields the same volume. A more unusual measurement for firewood is the "rick". It is stacked deep with the other measurements kept the same as a cord, making it ​¹⁄₃ of a cord; however, regional variations mean that its precise definition is nonstandardized.

Twenty-foot equivalent unit

Main article: Twenty-foot equivalent unit

The twenty-foot equivalent unit is the volume of the smallest standard shipping container. It is equivalent to 1,360 cubic feet (39 m³). Larger intermodal containers are commonly described in multiples of TEU, as are container ship capacities.

Acre-foot

Main article: Acre-foot

An acre-foot is a unit of volume commonly used in the United States in reference to large-scale water resources, such as reservoirs, aqueducts, canals, sewer flow capacity, irrigation water and river flows. It is defined by the volume of one acre of surface area to a depth of one foot (43,560 ft³) which is about 1,233.48 m³ (325,850 US gal; 271,330 imp gal).

Olympic-size swimming pool

An Olympic-size swimming pool holds over 2 acre-feet of water.

For larger volumes of liquid, one measure commonly used in the media in many countries is the Olympic-size swimming pool. A 50 m × 25 m (164 ft × 82 ft) Olympic swimming pool, built to the FR3 minimum depth of 2 metres (6.6 ft) would hold 2,500 m³ (2,500,000 L; 550,000 imp gal; 660,000 US gal) (2.5 million litres, about 2 acre-feet). The US National Institute of Standards and Technology (NIST) defines the Olympic swimming pool as 1 million litres, which is the approximate volume of the smaller FR2 pool.

Royal Albert Hall

The Royal Albert Hall, a large concert hall, is sometimes used as a unit of volume in the UK, for example when referring to volumes of rubbish placed in landfill. It is famously used in the line "Now they know how many holes it takes to fill the Albert Hall." in The Beatles song "A Day in the Life". The volume of the auditorium is between 3 and 3.5 million cubic feet (between 85,000 and 99,000 cubic metres).

Melbourne Cricket Ground

A common measure of volume in Australia, and in the state of Victoria in particular, is the Melbourne Cricket Ground, the largest stadium in Australia and 13th largest in the world. The volume of the Melbourne Cricket Ground is 1,574,000 cubic metres, or about 630 Olympic swimming pools. The seating capacity of the Melbourne Cricket Ground (approximately 95,000 as of October 2015) is also used as a unit measure of the number of people.

Sydney Harbour

Sydney Harbour (Port Jackson), contains enough water to fill the Melbourne Cricket Ground 300 times or about 200,000 Olympic swimming pools.

A unit of volume used in Australia for water. One Sydney Harbour, also called a Sydharb (or sydarb), is the amount of water in Sydney Harbour: approximately 500 gigalitres (500,000,000 cubic metres, or 0.5 a cubic kilometre); or in terms of the more unusual measures above, about 300 Melbourne Cricket Grounds, 200,000 Olympic Swimming pools, or 400,000 acre-feet.

The Grand Canyon

With a volume measure approximately 4 orders of magnitude greater than a Sydharb, the volume of the Grand Canyon may be used to visualize even larger things, like the magma chamber underneath Yellowstone and other things. According to the National Park Service, the volume of the Grand Canyon is 4.17 trillion cubic metres (5.45 trillion cubic yards) which is 4,170 km³ (1,000 cu mi).

Mass

Grave

In 1793, the French term "grave" (from "gravity") was suggested as the base unit of mass for the metric system. In 1795, however, the name "kilogramme" was adopted instead.

Bag of cement and bag mix

The mass of an old bag of cement was one hundredweight ~ 112 lb, approximately 50 kg. The amount of material that, say, an aircraft could carry into the air is often visualised as the number of bags of cement that it could lift. In the concrete and petroleum industry, however, a bag of cement is defined as 94 pounds (~ 42.6 kg), because it has an apparent volume close to 1 cubic foot. When ready-mix concrete is specified, a "bag mix" unit is used as if the batching company mixes 5 literal bags of cement per cubic yard (or cubic metre) when a "5 bag mix" is ordered.

Jupiter

Jupiter

When reporting on the masses of extrasolar planets, astronomers often discuss them in terms of multiples of Jupiter's mass (M_J = 1.9 ×10²⁷ kg). For example, "Astronomers recently discovered a planet outside our Solar System with a mass of approximately 3 Jupiters." Furthermore, the mass of Jupiter is nearly equal to one thousandth of the mass of the Sun.

Sun

Solar mass (M_☉ = 2.0×10³⁰ kg) is also often used in astronomy when talking about masses of stars or galaxies; for example, Alpha Centauri has the mass of 1.1 suns, and the Milky Way has a mass of approximately 6×10¹¹ M_☉.

Solar mass also has a special use when estimating orbital periods and distances of 2 bodies using Kepler's laws: a³ = M_totalT², where a is length of semi-major axis in AU, T is orbital period in years and M_total is the combined mass of objects in M_☉. In case of planet orbiting a star, M_total can be approximated to mean the mass of the central object. More specifically in the case of Sun and Earth the numbers reduce to M_total ~ 1, a ~ 1 and T ~ 1.

Time

Light-distance

George Gamow wrote of measurements of time such as the "light-mile" and "light-foot", the time taken for light to travel the specified unit distance, defined by "reversing the procedure" used in defining a light-year.

Shake

In nuclear engineering and astrophysics contexts, the shake is sometimes used as a conveniently short period of time. 1 shake is defined as 10 nanoseconds.

Jiffy

In computing, the jiffy is the duration of one tick of the system timer interrupt. Typically, this time is 0.01 seconds, though in some earlier systems (such as the Commodore 8-bit machines) the jiffy was defined as ​¹⁄₆₀ of a second, roughly equal to the vertical refresh period (i.e. the field rate) on NTSC video hardware (and the period of AC electric power in North America).

Microfortnight

One unit derived from the FFF system of units is the microfortnight, one millionth of the fundamental time unit of FFF, which equals 1.2096 seconds. This is a fairly representative example of "hacker humor", and is occasionally used in operating systems; for example, the OpenVMS TIMEPROMPTWAIT parameter is measured in microfortnights.

Decimal time systems

Main article: Decimal time

Decimal Time clock reading 2.50 DT equivalent to 6 AM standard time

The measurement of time is unique in SI in that while the second is the base unit, and measurements of time smaller than a second use prefixed units smaller than a second (e.g. microsecond, nanosecond, etc.), measurements larger than a second instead use traditional divisions, including the sexagesimal-based minute and hour as well as the less regular day and year units. SI allows for the use of larger prefixed units based on the second, a system known as metric time, but this is unusual.

There have been numerous proposals and usage of decimal time, most of which were based on the day as the base unit. For instance, in dynastic China, the kè was a unit that represented ​¹⁄₁₀₀ of a day (it has since been refined to ​¹⁄₉₆ of a day, or 15 minutes). In France, a decimal time system in place from 1793 to 1805 divided the day into 10 hours, each divided into 100 minutes, in turn each divided into 100 seconds; the French Republican Calendar further extended this by assembling days into ten-day "weeks". In Isaac Asimov's Robots of Dawn story, the planet Aurora adopted the same system. Ordinal dates and Julian dates allow for the expression of a decimal portion of the day. In the mid-1960s, to defeat the advantage of the recently introduced computers for the then popular rally racing in the Midwest, competition lag times in a few events were given in centids (​¹⁄₁₀₀ day, 864 seconds, 14.4 minutes), millids (​¹⁄_1,000 day, 86.4 seconds) and centims (​¹⁄₁₀₀ minute, 0.6 seconds) the latter two looking and sounding a bit like the related units of minutes and seconds. Decimal time proposals are frequently used in fiction, often in futuristic works.

In addition to decimal time, there also exist binary clocks and hexadecimal time.

Dog year

Main article: Aging in dogs

File:10 yr old Mastiff.JPG

A 10-year-old Neapolitan Mastiff

There are two diametrically opposed definitions of the dog year, primarily used to approximate the equivalent age of dogs and other animals with similar life spans. Both are based upon a popular myth regarding the aging of dogs that states that a dog ages seven years in the time it takes a human to age one year.

• One seventh of a year, or approximately 52 days. When this definition is used, a standard calendar year is known as a "human year".
• A standard (365-day) year of a dog's life, whereas a "human year" is the period of a dog's (or other animal's) life that is claimed to be equivalent to a year of a human being's life.

When these units are used, measurements in both "dog years" and "human years" are often included together, to more clearly indicate which name is used for each unit.

In fact, the aging of a dog varies by breed (larger breeds tend to have shorter lifespans than small and medium-sized breeds); dogs also develop faster and have longer adulthoods relative to their total life span than humans. Most dogs are sexually mature by 1 year old, which corresponds to perhaps 13 years old in humans.

Galactic year

Main article: Galactic year

The most common large-scale time scale is millions of years (megaannum or "Ma"). However, for long-term measurements, this still requires rather large numbers. Using as a measure the time it takes for the solar system to revolve once around the galactic core (GY - not to be confused with Gyr for gigayear), approximately 250 Ma, yields some easily memorizable numbers. In this scale, oceans appeared on Earth after 4 GY, life began at 5 GY, and multicellular organisms first appeared at 15 GY. Dinosaurs became extinct about ​¹⁄₄ GY ago, and the true age of mammals began about 0.2 GY ago. The age of the Earth is estimated at about 20 GY.

Angular measure

Furman

The Furman is a unit of angular measure equal to ​¹⁄_65,536 of a circle, or just under 20 arcseconds. It is named for Alan T. Furman, the American mathematician who adapted the CORDIC algorithm for 16-bit fixed-point arithmetic sometime around 1980. 16 bits give a resolution of 2¹⁶ = 65,536 distinct angles.

Binary degree, binary radian, brad

See also: Binary scaling § Binary angles

A related unit of angular measure equal to ​¹⁄₂₅₆ of a circle, represented by 8 bits, has found some use in machinery control where fine precision is not required, most notably crankshaft and camshaft position in internal combustion engine controllers, and in video game programming. There is no consensus as to its name, but it has been called the 8-Bit Furman, the Small Furman, the Furboy and more recently, the miFurman, (milli-binary-Furman). These units are convenient because they form cycles: for the 8-bit unit, the value overflows from 255 to 0 when a full circle has been traversed, so binary addition and subtraction work as expected. Measures are often made using a Gray code, which is trivially converted into more conventional notation.

Grade (also grad, gradian, gon)

Main article: Grad (angle)

Coordinates were measured in grades on official French terrestrial ordnance charts from the French revolution well into the 20th century. 1 grade (or in modern symbology 1 gon) = 0.9° or 0.01 right angle. One advantage of this measure is that the distance between latitude lines 0.01 gon apart is almost exactly 1 kilometer (and would be exactly 1 km if the original definition of 1 meter = ​¹⁄_10,000 quarter-meridian had been adhered to). One disadvantage is that common angles like 30° and 60° are expressed by fractional values (33​¹⁄₃ and 66​²⁄₃ respectively) so this "decimal" unit didn't succeed in displacing the "sexagesimal" units equilateral-vertex — degree — minute — second invented by Babylonian astronomers.

Angular mil

File:Mil estimation.jpg

Estimating angular mils by hand

The angular mil is used by many military organisations to measure plane angle and so to triangulate distances, given an object's apparent and actual size. It is approximately the angle which has a tangent of ​¹⁄_1,000; in NATO standard, this is rounded to ​¹⁄_6,400 of a circle, although other definitions are in use. Its name derives from Latin: millesimus ("thousandth") and so the fact it is used mostly by the military is coincidental to its name.

Energy

Gasoline gallon equivalent

Main article: Gasoline gallon equivalent

In 2011 the United States Environmental Protection Agency introduced the gallon gasoline equivalent as a unit of energy because their research showed most U.S. citizens do not understand the standard units. The gallon gasoline equivalent is defined as 33.7 kWh, or about 1.213×10⁸ joules.

Efficiency or fuel economy can be given as miles per gallon gasoline equivalent.

Tons of TNT equivalent

Main articles: TNT equivalent and Richter magnitude scale § Examples

The energy of various amounts of the explosive TNT (kiloton, megaton, gigaton) is often used as a unit of explosion energy, and sometimes of asteroid impacts and violent explosive volcanic eruptions. One ton of TNT produces 4.184×10⁹ joules, or (by arbitrary definition) exactly 10⁹ thermochemical calories (approximately 3.964×10⁶ BTU). This definition is only loosely based on the actual physical properties of TNT.

Hiroshima bomb and Halifax explosion

Hiroshima bomb explosion

Halifax explosion

Main article: Moment magnitude scale § Nuclear explosions

The energy released by the Hiroshima bomb explosion (about 15 kt TNT equivalent, or 6×10¹³ J) is often used by geologists as a unit when describing the energy of earthquakes, volcanic eruptions, and asteroid impacts.

Prior to the detonation of the Hiroshima bomb, the size of the Halifax Explosion (about 3 kt TNT equivalent, or 1.26×10¹³ J), was the standard for this type of relative measurement. Each explosion had been the largest known man-made detonation to date.

Foe

A foe is a unit of energy equal to 10⁴⁴ joules (≈9.478×10⁴⁰ BTU) that was coined by physicist Gerry Brown of Stony Brook University. To measure the staggeringly immense amount of energy produced by a supernova, specialists occasionally use the "foe", an acronym derived from the phrase [ten to the power of] fifty-one ergs, or 10⁵¹ ergs. This unit of measure is convenient because a supernova typically releases about one foe of observable energy in a very short period of time (which can be measured in seconds).

Other metric-compatible scales

Power: Ton of refrigeration

Main article: Ton of refrigeration

The amount of thermal energy removed by melting one ton of ice over twenty-four hours is referred to as a ton of refrigeration, or sometimes a ton of cooling. This unit of refrigeration capacity came from the days when large blocks of ice were used for cooling, and is still used to describe the heat-removal capabilities of refrigerators and chillers today. One ton of refrigeration is equal to 12,000 BTU/h exactly, or 3.517 kW.

Flow: Amazon River

The volume of discharge of the Amazon River sometimes used to describe large volumes of water flow such as ocean currents. The unit is equivalent to 216,000 m³/s.

Energy

Main article: Electronvolt § Mass

It is common in particle physics, where mass and energy are often interchanged, to use eV/c², where c is the speed of light in a vacuum (from E = mc²). Even more common is to use a system of natural units with c set to 1, and simply use eV as a unit of mass.

1 amu = 931.46 MeV/c²

Energy intensity

The langley (symbol Ly) is used to measure solar radiation or insolation. It is equal to one thermochemical calorie per square centimetre (4.184×10⁴ J/m² or ≈3.684 BTU/sq ft) and was named after Samuel Pierpont Langley. Do not confuse this with the symbol ly for light-year.

Kinematic viscosity

One of the few CGS units to see wider use, one stokes (symbol S or St) is a unit of kinematic viscosity, defined as 1 cm²/s, i.e., 10⁻⁴ m²/s (≈1.08×10⁻³ sq ft/s).

Electromagnetic flux

In radio astronomy, the unit of electromagnetic flux is the jansky (symbol Jy), equivalent to 10⁻²⁶ watts per square metre per hertz (= 10⁻²⁶ kg/s² in base units, about 8.8×10⁻³¹ BTU/ft²). It is named after the pioneering radio astronomer Karl Jansky. The brightest natural radio sources have flux densities of the order of one to one hundred jansky.

Metre of water equivalence

A material-dependent unit used in nuclear and particle physics and engineering to measure the thickness of shielding, for example around a nuclear reactor, particle accelerator, or radiation or particle detector. 1 mwe of a material is the thickness of that material that provides the equivalent shielding of one metre (≈39.4 in) of water.

This unit is commonly used in underground science to express the extent to which the overburden (usually rock) shields an underground space or laboratory from cosmic rays. The actual thickness of overburden through which cosmic rays must traverse to reach the underground space varies as a function of direction due to the shape of the overburden, which may be a mountain, or a flat plain, or something more complex like a cliff side. To express the depth of an underground space in mwe (or kmwe for deep sites) as a single number, the convention is to use the depth beneath a flat overburden at sea level that gives the same overall cosmic ray muon flux in the underground location.

Strontium unit: radiation dose

The strontium unit, formerly known as the Sunshine Unit (symbol S.U.), is a unit of biological contamination by radioactive substances (specifically strontium-90). It is equal to one picocurie of Sr-90 per gram of body calcium. Since about 2% of the human body mass is calcium, and Sr-90 has a half-life of 28.78 years, releasing 6.697+2.282 MeV per disintegration, this works out to about 1.065×10⁻¹² grays per second. The permissible body burden was established at 1,000 S.U.

Banana equivalent dose

A banana contains naturally occurring radioactive material in the form of Potassium-40

Bananas, like most organic material, naturally contain a certain amount of radioactive isotopes—even in the absence of any artificial pollution or contamination. The banana equivalent dose, defined as the additional dose a person will absorb from eating one banana, expresses the severity of exposure to radiation, such as resulting from nuclear weapons or medical procedures, in terms that would make sense to most people. This is approximately 78 nanosieverts - in informal publications one often sees this estimate rounded up to 0.1 μSv.

Molar mass of cellulose

In the pulp and paper industry, molar mass is traditionally measured with a method where the intrinsic viscosity (dL/g) of the pulp sample is measured in cupriethylenediamine (Cuen). The intrinsic viscosity [η] is related to the weight-average molar mass (in daltons) by the Mark-Houwink equation: [η] = 0.070 M_w^0.70. However, it is typical to cite [η] values directly in dL/g, as the "viscosity" of the cellulose, confusingly as it is not a viscosity.

Iodine, bromine and kappa number

In measuring unsaturation in fatty acids, the traditional method is the iodine number. Iodine adds stoichiometrically to double bonds, so their amount is reported in grams of iodine spent per 100 grams of oil. The standard unit is a dimensionless stoichiometry ratio of moles double bonds to moles fatty acid. A similar quantity, bromine number, is used in gasoline analysis.

In pulp and paper industry, a similar kappa number is used to measure how much bleaching a pulp requires. Potassium permanganate is added to react with the unsaturated compounds (lignin and uronic acids) in the pulp and back-titrated. Originally with chlorine bleaching the required quantity of chlorine could be then calculated, although modern methods use multiple stages. Since the oxidizable compounds are not exclusively lignin and the partially pulped lignin does not have a single stoichiometry, the relation between the kappa number and the precise amount of lignin is inexact.

Demography and epidemiology

Demography and quantitative epidemiology are statistical fields that deal with counts or proportions of people, or rates of change in these. Counts and proportions are technically dimensionless, and so have no units of measurement, although identifiers such as "people", "births", "infections" and the like are used for clarity. Rates of change are counts per unit of time and strictly have inverse time dimensions (per unit of time). In demography and epidemiology expressions such as "deaths per year" are used to clarify what is being measured.

Prevalence, a common measure in epidemiology is strictly a type of denominator data, a dimensionless ratio or proportion. Prevalence may be expressed as a fraction, a percentage or as the number of cases per 1,000, 10,000 or 100,000 in the population of interest.

Micromort

Main article: Micromort

A micromort is a unit of risk measuring a one-in-a-million probability of death (from micro- and mortality). Micromorts can be used to measure riskiness of various day-to-day activities. A microprobability is a one-in-a million chance of some event; thus a micromort is the microprobability of death. For example, smoking 1.4 cigarettes increases one's death risk by one micromort, as does traveling 370 km (230 miles) by car.

Numbers of people: Stadium capacities

To make large numbers of people comprehensible, the capacity of large stadiums is often used. Here the Melbourne Cricket Ground (MCG) is in the process of filling with 100,016 spectators on AFL grand final day in 2010.

The large numbers of people involved in demography are often difficult to comprehend. A useful visualisation tool is the audience capacity of large sports stadiums (often about 100,000). Often the capacity of the largest stadium in a region serves as a unit for a large number of people. For example, Uruguay's Estadio Centenario is often used in Uruguay, while in parts of the United States, Michigan Stadium is used in this manner. In Australia, the capacity of the Melbourne Cricket Ground (about 100,000) is often cited in this manner. Hence the Melbourne Cricket Ground serves as both a measure of people and a unit of volume.

Computer and information science

The growth of computing has necessitated the creation of many new units, several of which are based on unusual foundations.

Data volume

A CD-ROM can easily store the entirety of a paper encyclopedia's words and images, plus audio and video clips

Volume or capacity of data is often compared to various famous works of literature or to large collections of writing. Popular units include bibles, encyclopaediae, the complete works of Shakespeare, and the Library of Congress.

When the Compact Disc began to be used as a data storage device, the CD-ROM, journalists had to compare the disc capacity (650 megabytes) to something everyone could imagine. Since many Western households had a Christian Bible, and the Bible is a comparatively long book, it was often chosen for this purpose. The King James Version of the Bible in uncompressed plain 8-bit text contains about 4.5 million characters, so a CD-ROM can store about 150 Bibles.

The print version of the Encyclopædia Britannica is another common data volume metric. It contains approximately 300 million characters, so two copies would fit onto a CD-ROM and still have 50 megabytes (or about 11 bibles) left over.

The term Library of Congress is often used as an unusual unit of measurement to represent an impressively large quantity of data when discussing digital storage or networking technologies. It refers to the US Library of Congress. Information researchers have estimated that the entire print collections of the Library of Congress represent roughly 10 terabytes of uncompressed textual data.

Diagrams and photographs are not included in the total. In practice, diagrams can often be expressed more compactly using vector graphics, and data compression software can pack more text into the available space. English text can be compressed to about 11% of its original size. Thus, one might claim that the entire print collections of the Library of Congress could be packed onto a single 2.2 terabyte storage unit, so long as one excluded images, ignored foreign language holdings, and did not count the growth of the print collections by at least 6 million volumes since the time of the study that produced the 10 terabyte number. Furthermore, the modern Encyclopædia Britannica contains over 35000 image, audio, and video assets and fits on a single DVD-ROM.

Though some sources have suggested that 10 terabytes represents the total quantity of data stored at the Library of Congress, this is a significant underestimate, given that the Web Archiving program had by itself collected 525 terabytes of data as of July 2014. A slide from a September 2012 presentation by a Library of Congress storage engineer furthermore noted institutional storage capacity in excess of 27 petabytes, casting further doubt on the accuracy of the 10 terabyte number as applied to the entire holdings.

The Library of Congress itself has made no official claims of how much data is represented by its entire holdings, and several employees have expressly disavowed any of the specific numbers that have been attributed.

Nibble

A measure of quantity of data or information, the "nibble" (sometimes spelled "nybble" or "nybl") is normally equal to 4 bits, or one half of the common 8-bit byte. The nibble is used to describe the amount of memory used to store a digit of a number stored in binary-coded decimal format, or to represent a single hexadecimal digit. Less commonly, 'nibble' may be used for any contiguous portion of a byte of specified length, e.g. "6-bit nibble"; this usage is most likely to be encountered in connection with a hardware architecture in which the word length is not a multiple of 8, such as older 36-bit minicomputers.

FLOPS

Main article: FLOPS

In computing, FLOPS (FLoating point Operations Per Second) is a measure of a computer's computing power. It is also common to see measurements of kilo, mega, giga, and teraFLOPS.

It is also used to compare the performance of algorithms in practice.

KLOC: computer program length

A computer programming expression, the K-LOC or KLOC, pronounced kay-lok, standing for "kilo-Lines of Code", i.e., thousand lines of code. The unit was used, especially by IBM managers, to express the amount of work required to develop a piece of software. Given that estimates of 20 lines of functional code per day per programmer were often used, it is apparent that 1 K-LOC could take one programmer as long as 50 working days, or 10 working weeks. This measure is no longer in widespread use because different computer languages require different numbers of lines to achieve the same result (occasionally the measure "assembly equivalent lines of code" is used, with appropriate conversion factors from the language actually used to assembly language).

Error rates in programming are also measured in "Errors per K-LOC", which is called the defect density. NASA's SATC is one of the few organisations to claim zero defects in a large (>500K-LOC) project, for the space shuttle software.

A rare multiple of K-LOC is GLOC, pronounced jee-lok, standing for "giga-lines of code".

Other

Big Mac Index: purchasing power parity

Main article: Big Mac Index

A McDonald's Big Mac hamburger, as advertised in the United States

The Economist's Big Mac Index compares the purchasing power parity of countries in terms of the cost of a Big Mac hamburger. This was felt to be a good measure of the prices of a basket of commodities in the local economy including labour, rent, meat, bread, cardboard, advertising, lettuce, etc.

A similar system used in the UK is the 'Mars bar'. Tables of prices in Mars Bars have intermittently appeared in newspapers over the last 20 years, usually to illustrate changes in wages or prices over time without the confusion caused by inflation.

Centipawn

Chess software frequently uses centipawns internally or externally as a unit measuring how strong each player's situation position is, and hence also by how much one player is beating the other, and how strong a possible move is. 100 centipawns = the value of 1 pawn - more specifically, something like the average value of the pawns at the start of the game, as the actual value of pawns depends on their position. Loss of a pawn will therefore typically lose that player 100 centipawns (which is usually enough to lose the game). The centipawn is a convenient size for choosing between different possible moves, as in a given position, chess software will often rate the better of two moves within a few centipawns of each other.

Garn

The garn is NASA's unit of measure for symptoms resulting from space adaptation syndrome, the response of the human body to weightlessness in space, named after US Senator Jake Garn, who became exceptionally spacesick during an orbital flight in 1985. If an astronaut is completely incapacitated by space adaptation syndrome, he or she is under the effect of one garn of symptoms.

Mother Cow Index

Formerly used in real estate transactions in the American Southwest, it was the number of pregnant cows an acre of a given plot of land could support. It acted as a proxy for the agricultural quality, natural resource availability, and arability of a parcel of land.

Nines

Numbers very close to, but below one are often expressed in "nines" (N — not to be confused with the unit newton), that is in the number of nines following the decimal separator in writing the number in question. For example, "three nines" or "3N" indicates 0.999 or 99.9%, "four nines five" or "4N5" is the expression for the number 0.99995 or 99.995%.

Typical areas of usage are:

• The reliability of computer systems, that is the ratio of uptime to the sum of uptime and downtime. "Five nines" reliability in a continuously operated system means an average downtime of no more than approximately five minutes per year. (See high availability for a chart.)
• The purity of materials, such as gases and metals.

Pain

A woman wincing in pain

See also: Pain scale, Dolorimeter, Pain, and Nociception

The dol (from the Latin word for pain, dolor) is a unit of measurement for pain.

James D. Hardy, Herbert G. Wolff, and Helen Goodell of Cornell University proposed the unit based on their studies of pain during the 1940s-1950s. They defined one dol to equal to "just noticeable differences" (jnd's) in pain. The unit never came into widespread use and other methods are now used to assess the level of pain experienced by patients.

Pepper heat

ASTA pungency unit

ASTA (American Spice Trade Association) pungency unit is based on a scientific method of measuring chili pepper "heat". The technique utilizes high-performance liquid chromatography to identify and measure the concentrations of the various compounds that produce a heat sensation. Scoville units are roughly ​¹⁄₁₅ the size of pungency units while measuring capsaicin, so a rough conversion is to multiply pungency by 15 to obtain Scoville heat units.

Scoville heat unit

Chili peppers.

The Scoville scale is a measure of the hotness of a chili pepper. It is the degree of dilution in sugar water of a specific chili pepper extract when a panel of 5 tasters can no longer detect its "heat". Pure capsaicin (the chemical responsible for the "heat") has 16 million Scoville heat units.

Proof: alcohol concentration

A (nearly empty) bottle of 151 proof rum.

Up to the 20th century, alcoholic spirits were assessed in the UK by mixing with gunpowder and testing the mixture to see if it would still burn; spirit that just passed the test was said to be at 100° proof. The UK now uses percentage alcohol by volume at 20 °C (68 °F), where spirit at 100° proof is approximately 57.15% ABV; the US uses a "proof number" of twice the ABV at 60 °F (15.5 °C).

Savart

The Savart is an 18th-century unit for measuring the frequency ratio of two sounds, it is equal to ​¹⁄₃₀₀ of an octave, or ​¹⁄₂₅ of a semitone. Still used in some programs, but considered too rough for most purposes. Cent is preferred.

Schmidt sting pain index and Starr sting pain index

These are pain scales rating the relative pain caused by different hymenopteran stings. Schmidt has refined his Schmidt Sting Pain Index (scaled from 1 to 4) with extensive anecdotal experience, culminating in a paper published in 1990 which classifies the stings of 78 species and 41 genera of Hymenoptera. The Starr sting pain scale uses the same 1-to-4 scaling. In practice, the Comparative Pain Scale is used by doctors when working with patients.

Telecommunications traffic volume

Main article: Erlang (unit)

The erlang, named after A. K. Erlang, as a dimensionless unit is used in telephony as a statistical measure of the offered intensity of telecommunications traffic on a group of resources. Traffic of one erlang refers to a single resource being in continuous use, or two channels being at fifty percent use, and so on, pro rata. A lot of telecommunications management and forecasting software uses this unit on a day-to-day basis—but strictly speaking it is a telecom sector specific network stress measurement unit.

X-ray intensity

Main article: Crab (unit)

The crab is defined as the intensity of X-rays emitted from the Crab Nebula at a given photon energy up to 30 kiloelectronvolts. The Crab Nebula is often used for calibration of X-ray telescopes. For measuring the X-ray intensity of a less energetic source, the milliCrab (mCrab) may be used.

One crab is approximately 24 pW/m².

See also

• Conversion of units
• Hair's breadth
• History of measurement
• List of humorous units of measurement
• List of obsolete units of measurement
• Muggeseggele
• Systems of measurement
• Units (software), a unit conversion program, which supports many uncommon units.
• Units of measurement