Fiat C-platform
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Fiat C-platform | |
---|---|
Overview | |
Manufacturer | Fiat Group |
Production | First generation: 1995-2010 Second generation: 2001–2014 |
Body and chassis | |
Class | Small family car platform |
Layout | Front-engine, front-wheel drive |
Vehicles | First generation: Fiat Bravo Fiat Brava Fiat Marea Fiat Multipla Second generation: Fiat Stilo Fiat Bravo Lancia Delta Type Two rev. 3: Alfa Romeo 156 Alfa Romeo 147 Alfa Romeo GT Lancia Lybra |
Chronology | |
Predecessor | Type Two platform and Type Three platform |
Successor | Fiat Compact platform |
The Fiat C-platform was an automobile platform used in small family cars of the Fiat Group. The predecessors of the C-platform were the Type Three and Type Two platforms, and the successor is the new Compact platform[1] which debuted in Alfa Romeo Giulietta in 2010.
Contents
First generation (C1)
The first generation C-platform was no more of a lightly developed Type Two platform: it retained almost all of its components, including the suspension set-up. It is also called "Type Two rev. 2". As in the Type Two platform, the suspension is independent all-around, composed of MacPherson struts at the front and trailing arms at the rear. The first models to use this platform were the Fiat Bravo and Fiat Brava, followed by the Fiat Marea. The Fiat Multipla is built on the sandwich version of this platform.
The Lancia Lybra and Alfa Romeo 156 used a development of the C1 platform, called "Type Two rev. 3", with an extended wheelbase and a different suspension setup: MacPherson struts at the front and BLG ("Bracci Longitudinali Guidati", translating to "Guided Longitudinal Arms") rear suspension for the Lancia, double wishbones at the front and MacPherson struts at the rear for the Alfa. The Alfa Romeo 147 and Alfa Romeo GT were derived from the 156 floorpan.
Vehicles based on Fiat C1 platform
- 1995 Fiat Brava
- 1995 Fiat Bravo
- 1996 Fiat Marea
- 1998 Fiat Multipla
-
Fiat Bravo 1998 rear.jpg
-
Fiat Brava rear 20080318.jpg
-
Fiat Multipla silver front.JPG
-
Fiat Marea rear 20080222.jpg
-
Fiat Marea front 20070511.jpg
Second generation (C2)
The second generation C-platform was jointly designed by global team of Fiat engineers and small number of Lancia engineers in Fiat development center in Mirafiori, also engineers in Betim, Brazil took part of the development. This all-new chassis uses MacPherson strut front suspension and torsion beam rear suspension.
The first model to use this platform was the Fiat Stilo. Between 2007 and 2008 the C-platform was used by the new Fiat Bravo[2] and the new third generation Lancia Delta with longer wheelbase.[3] The C-platform was built in Cassino (Italy) and Betim to be used for the Brazilian versions of Stilo.
The C-platform supports many of Fiat engines from 1.2 FIRE petrol to 1.9 diesel MultiJet TwinTurbo.
Vehicles based on Fiat C2 platform
- 2001 Fiat Stilo (short wheelbase)
- 2002 Fiat Stilo Multiwagon (short wheelbase)
- 2007 Fiat Bravo (short wheelbase)
- 2008 Lancia Delta (long wheelbase)
-
Fiat Stilo rear.jpg
-
Bravo 2.JPG
-
Lancia Delta.JPG