BR Standard Class 2 2-6-2T

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
BR standard class 2 2-6-2T
300px
84013 just off the paint shops at Crewe in 1960
Type and origin
Power type Steam
Designer R. A. Riddles
Builder Crewe Works (20)
Darlington Works (10)
Build date July 1953 – June 1957
Total produced 30
Specifications
Configuration 2-6-2T
UIC class 1′C1′ h2t
Gauge 4 ft 8 12 in (1,435 mm)
Leading dia 3 ft 0 in (0.914 m)
Driver diameter 5 ft 0 in (1.524 m)
Trailing dia 3 ft 0 in (0.914 m)
Length Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value).
Width Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value).
Height Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value).
Axle load 14.00 long tons (14.22 t; 15.68 short tons)
Adhesive weight 41.25 long tons (41.91 t; 46.20 short tons)
Loco weight 66.05 long tons (67.11 t; 73.98 short tons)
Fuel type Coal
Fuel capacity 3.00 long tons (3.05 t; 3.36 short tons)
Water cap 1,350 imp gal (6,100 L; 1,620 US gal)
Boiler BR8
Boiler pressure 200 psi (1.38 MPa)
Firegrate area 17.5 sq ft (1.63 m2)
Heating surface:
 • Tubes and flues
924 sq ft (85.8 m2)
 • Firebox 101 sq ft (9.4 m2)
Superheater:
 • Heating area
124 sq ft (11.5 m2)
Cylinders Two, outside
Cylinder size 16.5 in × 24 in (419 mm × 610 mm)
Performance figures
Tractive effort 18,515 lbf (82.36 kN)
Factor of adh 5.0
Career
Operators British Railways
Power class 2MT
Numbers 84000–84029
Axle load class Route availability 3
Withdrawn November 1963 – January 1966
Disposition All original locomotives scrapped; one being converted from tender version

The British Railways standard class 2 2-6-2T was a class of steam locomotive, one of the standard classes of the 1950s.

Design and construction

The class was designed at Derby Works and introduced in 1953. The design derived from the LMS Ivatt Class 2 2-6-2T which BR had built after nationalisation. Modifications were made to the Ivatt design including a reduced cab to reduce the loading gauge and some standard fittings. BR classified them 2MT, emphasising a mixed-traffic role.

As most services which required 2MT 2-6-2Ts were already served by the 130 Ivatt engines, B.R. only ordered 30 engines, which eliminated pre-grouping steam locomotives as much as possible on local services.

The first 20 engines were outshopped at Crewe Works, and intended for use on ex-London Midland and Scottish Railway routes, then known as the London Midland Region. The second batch, this time built at Darlington Works, were numbered 84020–84029, and intended for Southern Region lines.

Liveries

Only two liveries were carried by the 2MTs- British Railway lined black with the earlier and later emblems. Although all locomotives received the latter, only 84000–84019 received the early emblem as the Darlington built locomotives were constructed in 1957, following the 1956 changeover to the late crest. The Darlington engines carried large 10-inch (25.4 cm) high cab-side numerals, whilst the Crewe engines carried standard 8-inch (20.3 cm) high numerals.

Service

The LMR locomotives were used on push-pull routes, and were often allocated alongside the Ivatt 2MT 2-6-2T engines with which they shared most of their origins. Numbers 84021–84029, the Southern Region locomotives were all allocated to the Eastern Section depot at Ashford for use on the lines over Romney Marsh and local trains on the Margate via Canterbury West route. Most were transferred away to the North Eastern Region in the early 1960s following electrification, but several locomotives (including some of the LMR allocation) were re-allocated to Eastleigh in 1965 for possible use on the Isle of Wight replacing life expired ex-London and South Western railway "O2" 0-4-4T engines, which dated from the turn of the century. However, this did not cover coaching stock replacement, and thus the locomotives were scrapped.

Table of withdrawals
Year Quantity in
service at
start of year
Quantity
withdrawn
Locomotive numbers Notes
1963 30 1 84012
1964 29 9 84001/07/20–24/27/29
1965 20 10 84000/02–06/08–09/11/18
1966 10 10 84010/13–17/19/25–26/28

Preservation

None of the class survived the cutter's torch, although their size and configuration would have made them an ideal choice for use on heritage railways. However, four BR standard class 2 2-6-0 locomotives – the tender-equipped equivalent – did survive, and one of these, 78059, is being rebuilt into 2-6-2T "84030". This takes the next number in the original series. 78059 was chosen primarily because it lost its tender while at Woodham Brothers scrapyard, Barry. Further reasons cited by the Bluebell Railway, where 78059 is based, are the suitability of the locomotive class for the railway's service trains, and because the tender version of the class was never allocated to the Southern Region, and hence the tank version (which was allocated there) is far more appropriate for the Bluebell's Southern Region location. As of 2013, 78059 was considered no more, as the fitting of the hind engine frame extensions have turned it into 84030. [1] [2]

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

External links