Apache Point Observatory

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Apache Point Observatory
File:Apache-0110.JPG
ARCSAT and SDSS telescope buildings at the Apache Point Observatory.
Organization Astrophysical Research Consortium
Code 705 (APO), 645 (SDSS)  
Location Sunspot, New Mexico
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Altitude 2,788 meters (9,147 ft)
Weather 65% clear nights
Established 1985 (1985)
Website www.apo.nmsu.edu
Telescopes
Astrophysical Research Consortium telescope 3.5 m reflector
Sloan Digital Sky Survey telescope 2.5 m reflector
New Mexico State University telescope 1.0 m reflector
ARCSAT 0.5 m reflector

The Apache Point Observatory (APO) is an astronomical observatory located in the Sacramento Mountains in Sunspot, New Mexico, United States, approximately 18 miles (29 km) south of Cloudcroft. The observatory is operated by New Mexico State University (NMSU) and owned by the Astrophysical Research Consortium (ARC). Access to the telescopes and buildings is restricted, but the public is able to visit the grounds.[1]

History

File:Sunspot Astronomy and Visitor's Center.jpg
Sunspot Astronomy and Visitor's Center

The ARC was formed in 1984 with the goal of building the 3.5 m telescope. It originally consisted of five institutions: New Mexico State University, University of Washington, University of Chicago, Princeton University, and Washington State University, which has since withdrawn.

Five additional organizations have joined over time: the Institute for Advanced Study, Johns Hopkins University, University of Colorado, University of Virginia, and Georgia State University. Funding for the 3.5 m and 0.5 m telescopes comes from consortium, but funds for the 2.5 m telescope come from a much wider array of sources. The 1.0 m telescope is supported exclusively by NMSU.[2]

Telescopes

ARC 3.5 m

The ARC 3.5-meter telescope

The ARC 3.5 m (140 in) telescope is a Ritchey-Chretien reflector on an alt-azimuth mount with instruments attached at several focal points. Construction of the building began in 1985, but full operations of the telescope were delayed until November of 1994 due to problems with fabricating the primary mirror.[3] From 1991 until early 1993 the telescope was fitted with a 1.8 m mirror now located at Rothney Astrophysical Observatory under a cost-sharing agreement.[4][5]

There are a variety of optical and near-infrared instruments available for the 3.5 m telescope, including:

  • The ARC echelle spectrometer (ARCES) uses a 2048 x 2048 pixel CCD and has a resolution of R~31,500.[6]
  • The Double Imaging Spectrometer (DIS) is a low-resolution optical spectrometer.[7]
  • The Near Infrared Camera/Fabry–Pérot Spectrometer (NICFPS) was developed at the University of Colorado. It uses a 1024x1024 H1RG HgCdTe infrared detector and a near-infrared Fabry–Pérot interferometer. It has many narrow band filters, including H2, [Fe II], and [SiVI]. It is unique among astronomical Fabry-Pérot devices in that it is cooled with liquid nitrogen.[8]
  • The Seaver Prototype Imaging camera (SPIcam) is an optical imaging instrument with a 2048x2048 pixel CCD.[9]
  • TripleSpec (Tspec) is a near infrared spectrograph which provides continuous wavelength coverage over the range 0.94-2.46 µm at moderate resolution (R~3500, depending on the choice of slit).[10]

The 3.5 m telescope is also used by the Apache Point Observatory Lunar Laser-ranging Operation (APOLLO) lunar-ranging project. The APOLLO laser has been operational since October 2005, and routinely accomplishes millimeter-level range accuracy between the Earth and the Moon.[11][12]

Observations using the 3.5 m telescope can be carried out remotely by observers using TUI, the Telescope User Interface, via the internet.[13]

SDSS 2.5 m

The SDSS 2.5 m (98 in) telescope is used for the Sloan Digital Sky Survey, and began operating in 2000. It is a Ritchey-Chretien reflector on an alt-azimuth mount housed under a roll-off enclosure. It was designed with an unusually large 3° field of view to better support its primary task of surveying the entire sky.[14]

NMSU 1.0 m

The NMSU 1.0 m (39 in) telescope is a Ritchey-Chretien reflector set on an alt-azimuth mount, and was completed in 1994.[15][16] A 2048x2048 CCD mounted at the Nasmyth focus provides at 15.7 arcminute view of the sky.[17]

0.5 m ARCSAT

The ARC Small Aperture Telescope (ARCSAT) was previously called the Photometric Telescope (PT) when it was part of the SDSS project. It is a 0.5 m (20 in) reflecting telescope on an equatorial mount, with a single CCD camera cooled by a CryoTiger unit.[18] It was built in 1991, moved from its previous location in 1998, and used by the SDSS until 2005.[19] It is currently used for small research projects.

Former telescopes

  • A 0.6 m (24 in) reflecting telescope was built in 1993 to monitor sky conditions for the SDSS project. It never operated in a satisfactory manner, and was replaced with the 0.5 m PT.[19]

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. 19.0 19.1 Lua error in package.lua at line 80: module 'strict' not found.

External links