A36 road

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

A36 road shield

A36 road
A36 road map.png
A36 close to its junction with the A303
Major junctions
North end: Bath
  A4 A4 road
A367 A367 road
A366 A366 road
A361 A361 road
A350 A350 road
A362 A362 road
A303 A303 road
x19px A30 road
A360 A360 road
A345 A345 road
A338 A338 road
x19px A27 road
A3090 A3090 road
[ M 2x30px  ] M27 motorway
A326 A326 road
A336 A336 road
x19px A35 road
South end: Southampton
Location
Primary
destinations
:
Warminster
Salisbury
Road network

The A36 is a trunk road and primary route in England that links the port city of Southampton to the city of Bath. At Bath, the A36 connects with the A4 road to Bristol, thus enabling a road link between the major ports of Southampton and Bristol. Originally, the A36 continued onto Avonmouth, but this section was renumbered to the A4. On its way south from Bath the A36 passes a number of towns and a city, including Warminster, Wilton and Salisbury in Wiltshire, and Totton in Hampshire, on the western outskirts of Southampton, where it joins the A35 road.

Standard of route

The majority of the A36 is built to single carriageway standard, but parts of it have been upgraded to dual carriageway standard. The A36 is dual carriageway for its 1 mile (1.6 km) bypass of the village of Beckington, 3 miles (5 km) north of Frome, and also dualled for approximately 1 mile (1.6 km) near to its grade separated junction with the A303 road, 8 miles (13 km) north-west of Wilton). The A36 in Salisbury acts as the city's ring road, bypassing the city centre to dual carriageway standard. Additionally, just south-east of Salisbury the largest dualled section exists for about 4 miles (6 km), bypassing the village of Alderbury. Then, the road is briefly dualled from its roundabout with the A3090 road to the M27 motorway (junction 2) – this part of the road is erroneously thought by some to have been previously known as the A36(M); prior to the opening of the Totton Western Bypass on the other side of Junction 2, it was named as a spur of the M27, and hence is built to motorway standards (see link below). It again reverts to single carriageway standard through Totton until it terminates.

Points of interest

Point Coordinates
(Links to map resources)
OS Grid Ref Notes
Bath Lua error in package.lua at line 80: module 'strict' not found. ST724656 Bath, Somerset
Southampton Lua error in package.lua at line 80: module 'strict' not found. SU373137 Southampton

External links