Tan Chong Motor

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Tan Chong Motor Holdings Berhad
Industry Automotive
Founded October 14, 1972; 52 years ago (1972-10-14)
Headquarters Kuala Lumpur, Malaysia
Area served
 Malaysia, Vietnam, Myanmar, Laos, Cambodia
Key people
 Tan Heng Chew (President)
Website www.tanchong.com.my

Tan Chong Motor Holdings Berhad, also known as the TCMH Group or simply Tan Chong Motor (TCM) is a Malaysia-based multinational corporation that is active in automobile assembly, manufacturing, distribution and sales, but is best known as the franchise holder of Nissan vehicles in Malaysia. The company was founded in 1957 by two Malaysian entrepreneurs, Tan Yuet Foh and Tan Kim Hor, with ambitions of importing and selling Datsun cars from Japan. Tan Chong Motor Holdings Berhad was incorporated on 14 October 1972, and in 1974, the company was listed on the Kuala Lumpur Stock Exchange.[1]

Tan Chong Motor Assemblies Sdn. Bhd. (TCMA), a subsidiary of the TCMH Group commenced automobile assembly operations in 1976 at its plant in Segambut, Kuala Lumpur. The TCMH Group later constructed a second and third plant in Serendah, Selangor (2007) and Da Nang, Vietnam (2013) respectively. Tan Chong Motor has been credited as one of the pioneers of the Malaysian automotive industry.

The TCMH Group also holds the franchise rights for UD Trucks, Renault and Foton Motor in Malaysia, as well as for Nissan vehicles in Vietnam, Cambodia, Laos and Myanmar respectively. TCMH also owns subsidiaries that are active in property holdings and financial services.

Tan Chong Motor Holdings Berhad (TCMH) is not to be confused with Tan Chong International Limited (TCIL), a separate Hong Kong-based holding company that was created in 1998 under a demerger initiated by the TCMH Group.[2]

History

1950s - Genesis

The Tan Chong story began in 1957, the same year Malaya became independent from British colonial rule, and 12 years since the end of World War II. The late Tan Yuet Foh, founder of Tan Chong Motor, was an enterprising taxi driver in Kuala Lumpur.[3] In 1957, Tan heard news of a visit from the President of Nissan Motor Company to the newly established Japanese embassy in Malaysia.[4] Without the luxury of powerful connections or a means to contact the President, he waited outside the embassy gates for the President's arrival. His perseverance and tenacity was rewarded when the President granted Tan the franchise rights to Nissan vehicles, and it is said that his words to the President were “Just give me the chance to sell a few cars and I’ll show you what we can do”. Tan Yuet Foh would later enlist the help of Tan Kim Hor, and together the Tan brothers formed Tan Chong & Sons Motor Co. Ltd..[4] Nissan/Datsun became the first Japanese marque to be imported and sold officially in Malaysia. The Tan brothers had no prior experience of selling cars, but in their first year of business they sold 39 cars from a shop lot in Jalan Ipoh, Kuala Lumpur.[4]

The Datsun 1000 was among the earliest Japanese cars to arrive in Malaysia.[1]

During the 1950s and 1960s, Malaysia was a largely agricultural nation reliant on tin, rubber and palm oil exports. The automotive market was relatively small as only the wealthy could afford cars in major cities like Kuala Lumpur, Penang and Ipoh. The market was dominated by British, European, American and Australian cars, as Malayans had long been accustomed to Western cars with the first models arriving as early as the late 19th century. Initially, Japanese cars were not popular when they arrived in the 1950s, and they were perceived as inferior to their Western counterparts.[4] The lightness and thin construction of the cheap Japanese cars drew criticism, and popularised the derogatory term, 'Milo tin' in the 1960s. The term came about when, according to an industry veteran from that time, a workshop had repaired damaged body panels on a Japanese car with scrap metal from old tins, including Milo tins, and it was possible that the repainting was improperly done and the wording underneath was visible.[4] Since then, the term 'Milo tin' has come to be used against cars with poor build quality or questionable safety credentials. In addition to the quality concerns, anti-Japanese sentiment was still strong in 1960s Malaysia, owing to bitter memories from the Japanese occupation several years prior. Undeterred by the discouraging comments, the Tan brothers figured that if nobody bought the cars, they could still use them for other means.[4]

1960s - Ascension

By the 1960s, the Malaysian government began to emphasise industrialisation, then viewed as a more dependable economic sector for employment and economic growth.[5] Malaysia had previously assembled a small number of cars and trucks, but the vast majority were imports. In May 1964, the Malaysian government enacted a policy to encourage the local assembly of vehicles and manufacturing of automotive components, as per the recommendation of experts from the Colombo Plan.[5] The new policy made imported completely built up (CBU) cars more expensive through the addition of import duties, and licenses were issued to various car companies who were interested in setting up local assembly plants.[5] Cars that were locally assembled with Malaysian manufactured components would be granted a reduction in import duties, making them cheaper and more competitive as a result.[5] The government would later ban the import of CBU cars altogether and instead, importers were required to obtain Approved Permits (AP) to legally import and sell CBU cars.

The Datsun Bluebird/310 was popularly used as taxis.[4]

Nissan/Datsun responded to the government's call for industrialisation by exporting completely knocked down (CKD) kits from Japan to Malaysia, where they were assembled at the newly constructed Capital Motor Assembly plant in Tampoi, Johor.[4] Several Datsun engineers assisted in the training of the local employees on technical skills at the plant. The first Malaysian-assembled Datsun rolled off the factory floor in June 1968.[4] Prices for the locally assembled Datsuns were reduced and sales improved significantly in the following years. However, in 1971, Capital Motor Assembly was sold to General Motors, and Datsun production was shifted to the Swedish Motor Assemblies (SMA) plant in Shah Alam, Selangor.[4]

1970s - Zenith

The 1970s was a prosperous decade for Tan Chong Motor, and it marked the first major turning point in the company's history. In 1970, Datsun became the best-selling brand of car in the Malaysian market.[1] Despite the initial struggles and scepticism, the Tan brothers had succeeded in establishing Datsun as a household name.[4] The dominance of long standing European brands had greatly diminished by the 70s, in contrast with the rapid rise in demand for Japanese cars.[6] In addition to Tan Chong Motor's efforts, the newfound success of Datsun in Malaysia was also attributed to the affordable pricing, high reliability and admirable fuel efficiency of the Datsun vehicles themselves, selling propositions which many of its European competitors of that period could not match.[6] For those reasons, Datsuns were widely used as taxis and many continued in service well into the 1990s.[7]

The greatest threat to Datsun's dominance in the Malaysian market came from another Japanese brand, Toyota.[6] Like Datsun, Toyota had also embarked on a similar approach in its marketing, offering affordable, reliable and fuel efficient vehicles for the masses. Both Toyota and Datsun battled fiercely for pole position in the Malaysian market, often just fractions apart in total market share. In 1974, Toyota captured 15.96% of the Peninsular Malaysian market, while Datsun managed 15.67%, and in 1975, Toyota and Datsun captured 14.97% and 14.85% respectively.[8] Nonetheless, Datsun successfully fended off Toyota for most of the 1970s and early 80s, making Malaysia one of the few markets in the world where Datsun beat Toyota.[9][4] Nissan's upper management in Tokyo were highly supportive of Tan Chong Motor's efforts, and Tan Yuet Foh was highly respected among Nissan's executives.[4] TCM often had the upper hand when negotiating pricing and specifications for Malaysian-market Datsuns.

The Datsun 120Y was a best-seller in Malaysia.

With growing demand for Datsun cars in the 1970s, the Tan brothers considered the possibility of constructing their own assembly plant.[4] Prior to 1976, Tan Chong Motor had to rely on third parties for the local assembly of their popular Datsun vehicles. The prospect of a new Malaysian plant was welcomed by Nissan's top executives, and it was decided that the plant would be constructed in Segambut, on the outskirts of Kuala Lumpur. Nissan's engineers would contribute to the plant's design, and its overall layout would mirror the prestigious Nissan Zama plant, while a separate subsidiary, Tan Chong Motor Assemblies Sdn. Bhd. (TCMA) would handle plant operations.[4] Advanced manufacturing techniques would also be incorporated, including the electro-dipping (ED) system of applying primer to car bodies, in which the entire bodyshell of a car is electrically charged and immersed in a tank of primer paint, ensuring that every bit of bare metal is covered and safeguarded against rust.[4] At the time, TCMA's plant was the nation's first to implement this technology. In 1976, the new plant commenced operations, and the first Datsun from TCMA was flagged off by Tan Yuet Foh in an official ceremony.[1] The following year, TCMA began assembling Nissan Diesel trucks and buses,[1] and by 1980, locally manufactured parts for TCMA's models had grown to include shock absorbers, leaf springs, tyres, glass, batteries, seat belts and wiring harnesses among others.[10]

1980s - Depression

The 1980s was a challenging period and marked a second major turning point in Tan Chong Motor's history. By the 80s, the Malaysian government had realized that their 1964 policy on the local assembly of vehicles and manufacturing of automotive components had not resulted in technology transfer as originally envisioned. Prices of new cars in Malaysia had inflated significantly by the early 80s, with most if not all locally assembled CKD models generally costing more to produce than an equivalent CBU import.[11] The inflation of car prices was attributed to a number of factors, including low efficiency and inadequate economies of scale among the parts manufacturers and assembly plants, the government's mandatory CKD deletion policy, high import and excise taxes for the CKD models, and various others.[11][12][13] Additionally, the automotive industry in Malaysia was held back by a small domestic market, and manufacturers primarily served domestic demand and did not emphasise exports, thus limiting the growth and competitiveness of the industry as a whole.[14]

Not content with the state of the nation's automotive industry, the government concluded that direct involvement was necessary to reverse losses and spur future industrial growth. The National Car Project was drafted in the early 80s with the objective of accelerating technology transfer, increasing and rationalising local content, and involving more bumiputera entrepreneurs in the then largely ethnic Chinese dominated automotive industry. The National Car Project would lead to the founding of Perusahaan Otomobil Nasional Sdn. Bhd. (Proton) in May 1983, and the launch of the Proton Saga in July 1985. The new Proton cars were assembled in a dedicated plant in Shah Alam and were exempt from import duties on the CKD packs, allowing them to be priced below the popular Japanese cars of the time such as the Nissan Sunny and Toyota Corolla. However, the Malaysian economy and automotive industry went into depression in the mid 80s, and the Japanese yen began to appreciate, driving up new car prices even further.[15] The combination of the various factors above witnessed sales of new Datsun cars plummeting 90% to an average of 300 units a month in 1986.[12] The Tan brothers' businesses were severely affected, and the latter half of the 1980s witnessed large revamps and restructuring in the Tan Chong group.[4] Datsun/Nissan would never again reclaim their title of Malaysia's best-selling car brand, as Proton and later Perodua would occupy and monopolise Tan Chong Motor's traditional budget car segment in the following years.

1990s - Rationalisation

The Nissan Vanette became TCMA's first export model.

By the 1990s, Tan Chong Motor had bounced back and rationalised their assets and resources. The reduction in sales caused by the dominance of the new Proton Saga, which had captured 85% of the market's sub-1.6 litre segment by 1987,[16] a segment which the Datsun/Nissan 120Y had long dominated, had inadvertently steered Tan Chong Motor to move upmarket and explore export opportunities. Prior to 1994, all Malaysian-assembled Datsun/Nissan cars were sold locally.[17] However, in November 1989, Tan Chong Motor expressed intentions to export their Nissan vehicles to neighbouring ASEAN countries, such as Singapore and Brunei.[17]

At the time, Nissan Japan held Tan Chong Motor Assemblies with high regard, and the Malaysian plant was regarded as the third best Nissan foreign assembly plant in the world, behind the United States and the United Kingdom.[17] TCMA had also pioneered women's rights in the traditionally male dominated Malaysian automotive industry, with as many as 44% of the assembly workforce in 1989 being female.[18][19] The female employees were treated no different from the males, and many carried out heavy tasks like welding, wet-sanding and polishing, as well as fixing doors, bumpers and engine parts among others.[19] In the 1980s, most local and even global automobile assembly plants did not employ women, with only a few exceptions in Sweden and West Germany, as well as the TCMA plant itself.[19] By late 1989, the TCMA plant was producing 31 different models, including contract assembly for non-Nissan models from Subaru, Audi and Volkswagen.[17] TCMA also became the nation's first plant to feature an engine assembly line in December 1988.[20][17] The 1989 Nissan Sentra became the first car to be sold with a Malaysian-assembled engine, ahead of the Proton Saga, as Proton only commenced engine assembly operations in June 1989.[17][21] Later in 1993, the plant became the first in Southeast Asia to be ISO 9002 certified.[22]

In December 1994, Nissan Japan would finally permit Tan Chong Motor to export the Malaysian-assembled Nissan Vanette to Papua New Guinea, TCM's first export market.[23] The arrangement made TCM the first company to export ASEAN-assembled Nissan vehicles.[23] TCM would later export the Vanette to Fiji, Bangladesh and Brunei,[1] while exports of Vanette spare parts to Nissan Japan commenced in November 1996. Additionally, TCMA was also tasked with assisting local assembly operations at Pakistan-based Ghandhara Nissan.[24][25] The company was awarded the contract because Nissan Japan had recognised TCMA's abilities in small-scale, diverse assembly of vehicles. The TCMH Group also supplied various parts for non-Nissan models, including the popular Proton Saga and Perodua Kancil.[26][27] Tan Chong Motor continued to greatly influence the Malaysian automotive industry through its parts manufacturing division, APM Automotive Holdings Berhad (APM).[26]

2000s - Diversification

The Renault Kangoo. Malaysia is Renault's production hub in Southeast Asia.

The 2000s was a decade of diversification in the Tan Chong Motor portfolio. Since its founding, the Tan Chong name had become synonymous with Datsun and Nissan vehicles in Malaysia, but in mid-2003, the company adopted the Renault brand in line with the Renault–Nissan Alliance.[28] A new subsidiary, TC Euro Cars Sdn. Bhd. (TCEC) was created to market, distribute and provide after-sale services for Malaysian-market Renault cars.[29] The Renault brand was handled by Quasar Carriage Sdn. Bhd. prior to the advent of TCEC.[28] Additionally, local assembly of the Renault Kangoo commenced in 2004 at TCMA's Segambut plant, and Renault's upper management in France would later designate Malaysia as their ASEAN manufacturing hub.[29]

Ground breaking for a second TCMA assembly plant in Serendah, Selangor took place on 28 February 2006.[1] Tan Chong Motor/Nissan is the only non-national badged automobile company to simultaneously operate two Malaysian assembly plants, and at the time, it was the second company to claim that distinction, with the first being Proton and their 2003 Tanjung Malim plant. The new Serendah plant boosted Tan Chong Motor's production capacity, and incorporated advanced manufacturing technology under the Nissan Production Way (NPW).[4] The original 1976 Segambut plant had become outdated by the 2000s, as its layout did not readily allow the use of modern manufacturing processes like modular assembly.[4] Additionally, the location of the old plant had become impractical as congestion in Kuala Lumpur had grown significantly since the 1970s. The Nissan Latio became the first model to roll off Tan Chong Motor's new Serendah plant in 2007.[1]

2010s - Expansion

The Nissan Almera/Sunny. The TCMH Group assembles the car in Malaysia (TCMA) and Vietnam (TCIEV).

The first-half of the 2010s witnessed Tan Chong Motor's expansion into Indochina. The company has long since identified Vietnam as a country with vast opportunity for growth with regards to automobile sales. In 1995, four partners, Danang Auto Mechanical Engineering Factory, Marubeni, Nissan Japan and the Tan Chong Group had jointly drafted plans for a Vietnamese Nissan assembly plant, with construction scheduled for mid-1997.[30] However, the opening of the Vietnamese plant was postponed indefinitely as a result of the 1997 Asian financial crisis.[31][32] A decade-and-a-half later, the TCMH Group finally opened their Vietnamese plant in Da Nang, the Group's first international plant, with the first left-hand drive Nissan Sunny models rolling off the factory floor on 11 June 2013.[33] TCIE Vietnam Pte. Ltd. (TCIEV), a wholly owned subsidiary of the TCMH Group handles the manufacturing of Nissan vehicles in Vietnam, while Nissan Vietnam Co. Ltd. (NVL), a joint venture between Nissan Japan and the TCMH Group handles the marketing, distribution and provisioning of after-sale services for Vietnamese-market Nissan cars. NVL also offers fully imported CBU cars in addition to their CKD Sunny.

Tan Chong Motor was also awarded the franchise rights to Nissan vehicles in neighbouring Laos and Cambodia in 2010.[1] Tan Chong Motor (Cambodia) Pty. Ltd. and Tan Chong Motor (Lao) Co., Ltd. handle the marketing, distribution and provisioning of after-sale services for Cambodian-market and Laotian-market Nissan cars respectively. However, all Nissan vehicles in Cambodia and Laos are fully imported CBU models. Previously, Nissan Japan had appointed Denmark-based Kjaer Group to handle the Nissan brand in Vietnam, Laos and Cambodia since 2004, but the franchise rights would later transition to the Tan Chong Group towards the end of that decade.[34]

In July 2013, Nissan Japan would once again award Tan Chong Motor the franchise rights for Nissan vehicles in Myanmar, and in August that same year, the Myanmar Investment Commission granted TCMH a license to manufacture vehicles in the Bago industrial area.[35][36] Tan Chong Motor (Myanmar) Co., Ltd., a wholly owned subsidiary of the TCMH Group will manufacture Burmese-market Nissan vehicles, while ETCM (Myanmar) Co., Ltd., also a wholly owned subsidiary currently handles the marketing, distribution and provisioning of after-sale services respectively. The plant is scheduled to be completed in 2018 and the Nissan Sunny will be the first model to be locally assembled for the Burmese market.[37]

Infiniti, Nissan's luxury division was officially imported into Malaysia in October 2011 by Inspired Motor Sdn. Bhd., a joint venture between Edaran Tan Chong Motor Sdn. Bhd. (ETCM) and Auto Dunia Sdn. Bhd., in which ETCM holds a 74% stake.[1] All Malaysian-market Infinitis are fully imported (CBU), and neither Tan Chong Motor nor Infiniti have announced any plans for local assembly.

The Tan Chong Group has also expanded and experimented with the motorcycle market in Indochina. In January 2012, Tan Chong Motorcycles (Laos) Co., Ltd was granted the distributorship rights by Vietnam Manufacturing and Export Processing Co., Ltd., a subsidiary of Taiwan-based Sanyang Motor Co., Ltd., to market SYM motorcycles in Laos.[38] The distributorship agreement was later terminated in September 2013 following poor sales performance.[39] Additionally, the TCMH Group signed a distributorship agreement with Kawasaki Heavy Industries Ltd. in December 2014 to distribute and sell CBU Kawasaki motorcycles, spare parts and accessories in Vietnam through their subsidiary, TC Motorcycles (Vietnam) Co., Ltd.[40]

As of Q1 2016, Tan Chong Nissan had overtaken arch rival UMW Toyota after years of playing second fiddle. Nissan is now the fourth best-selling car brand in Malaysia, after Perodua, Proton and Honda.[41]

Production facilities

Malaysia

Serendah, Selangor

Segambut, Kuala Lumpur

Da Nang, Vietnam

Bago, Myanmar

References

  1. ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ 4.00 4.01 4.02 4.03 4.04 4.05 4.06 4.07 4.08 4.09 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ 5.0 5.1 5.2 5.3 Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ 6.0 6.1 6.2 Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ 11.0 11.1 Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ 12.0 12.1 Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  16. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  17. ↑ 17.0 17.1 17.2 17.3 17.4 17.5 Lua error in package.lua at line 80: module 'strict' not found.
  18. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  19. ↑ 19.0 19.1 19.2 Lua error in package.lua at line 80: module 'strict' not found.
  20. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  21. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  22. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  23. ↑ 23.0 23.1 Lua error in package.lua at line 80: module 'strict' not found.
  24. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  25. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  26. ↑ 26.0 26.1 Lua error in package.lua at line 80: module 'strict' not found.
  27. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  28. ↑ 28.0 28.1 Lua error in package.lua at line 80: module 'strict' not found.
  29. ↑ 29.0 29.1 Lua error in package.lua at line 80: module 'strict' not found.
  30. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  31. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  32. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  33. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  34. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  35. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  36. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  37. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  38. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  39. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  40. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  41. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  42. ↑ 42.0 42.1 42.2 42.3 42.4 42.5 42.6 42.7 Lua error in package.lua at line 80: module 'strict' not found.
  43. ↑ 43.0 43.1 43.2 43.3 43.4 Lua error in package.lua at line 80: module 'strict' not found.
  44. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  45. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  46. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  47. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Tan_Chong_Motor&oldid=718045224"