Kilcoy–Beerwah Road

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Kilcoy–Beerwah Road
Queensland
General information
Type Road
Length 30.4 km (19 mi)[1]
Route number(s) <templatestyles src="Plainlist/styles.css"/>
  • Entire route
Major junctions
West end D'Aguilar Highway, Woodford
  <templatestyles src="Plainlist/styles.css"/>
  • Commissioners Flat Road
  • Maleny–Stanley River Road
  • Bald Knob Road
  • Old Gympie Road
  • Peachester Road
  • Roberts Road
East end Glass House Mountains Road (Steve Irwin Way) Beerwah
Location(s)
Major suburbs Stanmore, Cedarton, Peachester

Kilcoy–Beerwah Road is a continuous 30.4-kilometre (18.9 mi) road route in the Moreton Bay and Sunshine Coast local government areas of Queensland, Australia. It is designated as part of State Route 6.[1] It is a state-controlled regional road (number 492).[2][3] It is part of a route that carries tourist traffic from the New England Highway to the Bruce Highway.[4]

Route description

Kilcoy–Beerwah Road commences as State Route 6 at an intersection with the D'Aguilar Highway in Woodford. It runs north-east and north through Stanmore and Cedarton, passing the exit to Commissioners Flat Road to the south-east. It then climbs the western slope of the Conondale Range and passes the exit to Maleny–Stanley River Road to the north-west. Next it turns east as it enters Peachester, where the name changes to Peachester Road. It continues east through Peachester, crossing the Stanley River, passing the exit to Bald Knob Road to the north and another exit to Commissioners Flat Road to the south-west.[1]

The road then turns south-east, descending the range as it enters Beerwah, and crosses Old Gympie Road before entering the village. As it enters the village it turns south on a bypass of the Beerwah CBD, leaving Peachester Road which continues east, and resuming its official name. It then turns south-east, crossing Roberts Road at a roundabout, and ends at a four-way intersection with Glass House Mountains Road (Steve Irwin Way). State Route 6 turns north towards Landsborough, and Roys Road runs east to the Bruce Highway.[1]

Land use along the road is mainly rural.[1]

Road condition

The road is fully sealed, and most of it is two-lane road. 1-kilometre (0.62 mi) of the road is steeper than 10%, and a further 3.1-kilometre (1.9 mi) is between 5 and 10%. The highest elevation along the road is 299-metre (981 ft) and the lowest is 28.8-metre (94 ft).[5]

Upgrade project

A project to upgrade the intersection with Old Gympie Road, at a cost of $5.5 million, was completed in August 2021.[6]

History

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Main articles: Woodford, Queensland § History; Stanmore, Queensland § History; Peachester, Queensland § History; and Beerwah, Queensland § History

In 1841 the Archer brothers established Durundur Station along the Stanley River, near where Woodford now stands.[7] In 1877, 10,800 acres (4,400 ha) were resumed from the Durundur pastoral run and offered for selection on 19 April 1877.[8]

Stanmore pastoral run was established before 1885.[9] In 1912 part of the Stanmore property was subdivided and sold.[10]

Cedarton was originally called Pointon's Pocket, after an early settler. He was a bullocky who harvested large quantities of cedar from the western slopes of the range. By 1905 land in the area was available for selection. Prior to 1909, when the railway reached Woodford,[11] timber was taken by bullock dray to either Woodford or Caboolture for milling. Bullocks were still used to take timber to Woodford for some time before they were replaced by motor trucks.[12]

The town of Peachester was surveyed in 1888.[13] Early industries included dairying and timber felling.[14]

European settlement at Beerwah began in 1877, with timber cutting and land clearing, followed by fruit growing and other forms of agriculture.[15]

Major intersections

All distances are from Google Maps.[1] The road is within the Moreton Bay and Sunshine Coast local government areas.

LGA Location km mi Destinations Notes
Moreton Bay Woodford 0 0 D'Aguilar Highway – north-west – Kilcoy
– south-east – Caboolture		 Western end of Kilcoy-Beerwah Road (State Route 6).
Cedarton 10.6 6.6 Commissioners Flat Road – south-east – Commissioners Flat Road continues north.
Sunshine Coast Cedarton / Peachester midpoint 13.5 8.4 Maleny–Stanley River Road – north-west – Maleny Road turns east and name changes to Peachester Road.
Peachester 20.3 12.6 Bald Knob Road – north – Bald Knob Road continues south-east.
20.9 13.0 Commissioners Flat Road – south-west – Commissioners Flat Road continues south-east, then east.
Beerwah 27.6 17.1 Old Gympie Road – north – Landsborough
– south-west – Glass House Mountains		 Road continues south-east.
29.2 18.1 Peachester Road – east – Beerwah CBD Road turns south and name changes back to Kilcoy-Beerwah Road.
29.8 18.5 Roberts Road – north-east – Beerwah CBD
south-west – Beerwah		 Road continues south-east.
30.4 18.9 Glass House Mountains Road (Steve Irwin Way) – north – Landsborough
(No shield) Glass House Mountains Road (Steve Irwin Way) – south – Glass House Mountains.		 Eastern end of Kilcoy–Beerwah Road.
Road continues east as Roys Road.
1.000 mi = 1.609 km; 1.000 km = 0.621 mi
  •       Route transition

See also

References

  1. ↑ 1.0 1.1 1.2 1.3 1.4 1.5 Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Archer Family Correspondence 1825–1855, Box: 11261. Heritage Collections State Library of Queensland.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.


Retrieved from "https://infogalactic.com/w/index.php?title=Kilcoy–Beerwah_Road&oldid=727210956"