x86 instruction listings

Lua error in package.lua at line 80: module 'strict' not found. Lua error in package.lua at line 80: module 'strict' not found.

The x86 instruction set refers to the set of instructions that x86-compatible microprocessors support. The instructions are usually part of an executable program, often stored as a computer file and executed on the processor.

The x86 instruction set has been extended several times, introducing wider registers and datatypes as well as new functionality.^[1]

x86 integer instructions

This is the full 8086/8088 instruction set. Most if not all of these instructions are available in 32-bit mode; they just operate on 32-bit registers (eax, ebx, etc.) and values instead of their 16-bit (ax, bx, etc.) counterparts. See also x86 assembly language for a quick tutorial for this processor family. The updated instruction set is also grouped according to architecture (i386, i486, i686) and more generally is referred to as x86_32 and x86_64 (also known as AMD64).

Original 8086/8088 instructions

Original 8086/8088 instruction set
Instruction	Meaning	Notes	Opcode
AAA	ASCII adjust AL after addition	used with unpacked binary coded decimal	0x37
AAD	ASCII adjust AX before division	8086/8088 datasheet documents only base 10 version of the AAD instruction (opcode 0xD5 0x0A), but any other base will work. Later Intel's documentation has the generic form too. NEC V20 and V30 (and possibly other NEC V-series CPUs) always use base 10, and ignore the argument, causing a number of incompatibilities	0xD5
AAM	ASCII adjust AX after multiplication	Only base 10 version (Operand is 0xA) is documented, see notes for AAD	0xD4
AAS	ASCII adjust AL after subtraction		0x3f
ADC	Add with carry	`destination := destination + source + carry_flag`	0x10…0x15, 0x80/2…0x83/2
ADD	Add	(1) `r/m += r/imm;` (2) `r += m/imm;`	0x00…0x05, 0x80/0…0x83/0
AND	Logical AND	(1) `r/m &= r/imm;` (2) `r &= m/imm;`	0x20…0x25, 0x80/4…0x83/4
CALL	Call procedure	`push eip; eip points to the instruction directly after the call`	0x9A, 0xE8, 0xFF/2, 0xFF/3
CBW	Convert byte to word		0x98
CLC	Clear carry flag	`CF = 0;`	0xF8
CLD	Clear direction flag	`DF = 0;`	0xFC
CLI	Clear interrupt flag	`IF = 0;`	0xFA
CMC	Complement carry flag		0xF5
CMP	Compare operands		0x38…0x3D, 0x80/7…0x83/7
CMPSB	Compare bytes in memory		0xA6
CMPSW	Compare words		0xA7
CWD	Convert word to doubleword		0x99
DAA	Decimal adjust AL after addition	(used with packed binary coded decimal)	0x27
DAS	Decimal adjust AL after subtraction		0x2F
DEC	Decrement by 1		0x48, 0xFE/1, 0xFF/1
DIV	Unsigned divide	`DX:AX = DX:AX / r/m;` resulting `DX == remainder`	0xF6/6, 0xF7/6
ESC	Used with floating-point unit
HLT	Enter halt state		0xF4
IDIV	Signed divide	`DX:AX = DX:AX / r/m;` resulting `DX == remainder`	0xF6/7, 0xF7/7
IMUL	Signed multiply	(1) `DX:AX = AX * r/m;` (2) `AX = AL * r/m`	0x69, 0x6B, 0xF6/5, 0xF7/5, 0x0FAF
IN	Input from port	(1) `AL = port[imm];` (2) `AL = port[DX];` (3) `AX = port[DX];`	0xE4, 0xE5, 0xEC, 0xED
INC	Increment by 1		0x40, 0xFE/0, 0xFF/0
INT	Call to interrupt		0xCD
INTO	Call to interrupt if overflow		0xCE
IRET	Return from interrupt		0xCF
Jcc	Jump if condition	(`JA, JAE, JB, JBE, JC, JE, JG, JGE, JL, JLE, JNA, JNAE, JNB, JNBE, JNC, JNE, JNG, JNGE, JNL, JNLE, JNO, JNP, JNS, JNZ, JO, JP, JPE, JPO, JS, JZ`)	0x70…0x7F, 0xE3, 0x0F83, 0x0F87
JCXZ	Jump if CX is zero		0xE3
JMP	Jump		0xE9…0xEB, 0xFF/4, 0xFF/5
LAHF	Load FLAGS into AH register		0x9F
LDS	Load pointer using DS		0xC5
LEA	Load Effective Address		0x8D
LES	Load ES with pointer		0xC4
LOCK	Assert BUS LOCK# signal	(for multiprocessing)	0xF0
LODSB	Load string byte	`if (DF==0) AL = SI++; else AL = SI--;`	0xAC
LODSW	Load string word	`if (DF==0) AX = SI++; else AX = SI--;`	0xAD
LOOP/LOOPx	Loop control	(`LOOPE, LOOPNE, LOOPNZ, LOOPZ`) `if (x && --CX) goto lbl;`	0xE0..0xE2
MOV	Move	copies data from one location to another, (1) `r/m = r;` (2) `r = r/m;`
MOVSB	Move byte from string to string	if (DF==0) (byte)DI++ = (byte)SI++; else (byte)DI-- = (byte)SI--;	0xA4
MOVSW	Move word from string to string	if (DF==0) (word)DI++ = (word)SI++; else (word)DI-- = (word)SI--;	0xA5
MUL	Unsigned multiply	(1) `DX:AX = AX * r/m;` (2) `AX = AL * r/m;`
NEG	Two's complement negation	`r/m *= -1;`
NOP	No operation	opcode equivalent to `XCHG EAX, EAX`, but it is never optimized to "nothing happens", always using a fixed number of processor ticks	0x90
NOT	Negate the operand, logical NOT	`r/m ^= -1;`
OR	Logical OR	(1) `r/m \|= r/imm;` (2) `r \|= m/imm;`
OUT	Output to port	(1) `port[imm] = AL;` (2) `port[DX] = AL;` (3) `port[DX] = AX;`
POP	Pop data from stack	`r/m = *SP++;` POP CS (opcode 0x0F) works only on 8086/8088. Later CPUs use 0x0F as a prefix for newer instructions.
POPF	Pop FLAGS register from stack	`FLAGS = *SP++;`	0x9D
PUSH	Push data onto stack	`*--SP = r/m;`
PUSHF	Push FLAGS onto stack	`*--SP = FLAGS;`	0x9C
RCL	Rotate left (with carry)
RCR	Rotate right (with carry)
REPxx	Repeat MOVS/STOS/CMPS/LODS/SCAS	(`REP, REPE, REPNE, REPNZ, REPZ`)
RET	Return from procedure	Not a real instruction. The assembler will translate these to a RETN or a RETF depending on the memory model of the target system.
RETN	Return from near procedure
RETF	Return from far procedure
ROL	Rotate left
ROR	Rotate right
SAHF	Store AH into FLAGS		0x9E
SAL	Shift Arithmetically left (signed shift left)	(1) `r/m <<= 1;` (2) `r/m <<= CL;`
SAR	Shift Arithmetically right (signed shift right)	(1) `(signed) r/m >>= 1;` (2) `(signed) r/m >>= CL;`
SBB	Subtraction with borrow	alternative 1-byte encoding of `SBB AL, AL` is available via undocumented SALC instruction
SCASB	Compare byte string		0xAE
SCASW	Compare word string		0xAF
SHL	Shift left (unsigned shift left)
SHR	Shift right (unsigned shift right)
STC	Set carry flag	`CF = 1;`	0xF9
STD	Set direction flag	`DF = 1;`	0xFD
STI	Set interrupt flag	`IF = 1;`	0xFB
STOSB	Store byte in string	`if (DF==0) ES:DI++ = AL; else ES:DI-- = AL;`	0xAA
STOSW	Store word in string	`if (DF==0) ES:DI++ = AX; else ES:DI-- = AX;`	0xAB
SUB	Subtraction	(1) `r/m -= r/imm;` (2) `r -= m/imm;`
TEST	Logical compare (AND)	(1) `r/m & r/imm;` (2) `r & m/imm;`
WAIT	Wait until not busy	Waits until BUSY# pin is inactive (used with floating-point unit)	0x9B
XCHG	Exchange data	`r :=: r/m;` A spinlock typically uses xchg as an atomic operation. (coma bug).
XLAT	Table look-up translation	behaves like `MOV AL, [BX+AL]`	0xD7
XOR	Exclusive OR	(1) `r/m ^= r/imm;` (2) `r ^= m/imm;`

Added in specific processors

Added with 80186/80188

Instruction	Meaning	Notes
BOUND	Check array index against bounds	raises software interrupt 5 if test fails
ENTER	Enter stack frame	Modifies stack for entry to procedure for high level language. Takes two operands: the amount of storage to be allocated on the stack and the nesting level of the procedure.
INS	Input from port to string	equivalent to IN (E)AX, DX MOV ES:[(E)DI], (E)AX ; adjust (E)DI according to operand size and DF
LEAVE	Leave stack frame	Releases the local stack storage created by the previous ENTER instruction.
OUTS	Output string to port	equivalent to MOV (E)AX, DS:[(E)SI] OUT DX, (E)AX ; adjust (E)SI according to operand size and DF
POPA	Pop all general purpose registers from stack	equivalent to POP DI POP SI POP BP POP AX ;no POP SP here, only ADD SP,2 POP BX POP DX POP CX POP AX
PUSHA	Push all general purpose registers onto stack	equivalent to PUSH AX PUSH CX PUSH DX PUSH BX PUSH SP ; The value stored is the initial SP value PUSH BP PUSH SI PUSH DI
PUSH immediate	Push an immediate byte/word value onto the stack	equivalent to PUSH 12h PUSH 1200h
IMUL immediate	Unsigned multiplication of immediate byte/word value	equivalent to IMUL 12h IMUL 1200h
SHL/SHR/ROL/ROR/RCL/RCR immediate	Rotate/shift bits with an immediate value greater than 1	equivalent to ROL AX,3 SHR BL,3

Added with 80286

Instruction	Meaning	Notes
ARPL	Adjust RPL field of selector
CLTS	Clear task-switched flag in register CR0
LAR	Load access rights byte
LGDT	Load global descriptor table
LIDT	Load interrupt descriptor table
LLDT	Load local descriptor table
LMSW	Load machine status word
LOADALL	Load all CPU registers, including internal ones such as GDT	Undocumented, 80286 and 80386 only
LSL	Load segment limit
LTR	Load task register
SGDT	Store global descriptor table
SIDT	Store interrupt descriptor table
SLDT	Store local descriptor table
SMSW	Store machine status word
STR	Store task register
VERR	Verify a segment for reading
VERW	Verify a segment for writing

Added with 80386

Instruction	Meaning	Notes
BSF	Bit scan forward
BSR	Bit scan reverse
BT	Bit test
BTC	Bit test and complement
BTR	Bit test and reset
BTS	Bit test and set
CDQ	Convert double-word to quad-word	Sign-extends EAX into EDX, forming the quad-word EDX:EAX. Since (I)DIV uses EDX:EAX as its input, CDQ must be called after setting EAX if EDX is not manually initialized (as in 64/32 division) before (I)DIV.
CMPSD	Compare string double-word	Compares ES:[(E)DI] with DS:[SI]
CWDE	Convert word to double-word	Unlike CWD, CWDE sign-extends AX to EAX instead of AX to DX:AX
INSD	Input from port to string double-word
IRETx	Interrupt return; D suffix means 32-bit return, F suffix means do not generate epilogue code (i.e. LEAVE instruction)	Use IRETD rather than IRET in 32-bit situations
JECXZ	Jump if ECX is zero
LFS, LGS	Load far pointer
LSS	Load stack segment
LODSD	Load string double-word	can be prefixed with REP
LOOPW, LOOPccW	Loop, conditional loop	Same as LOOP, LOOPcc for earlier processors
LOOPD, LOOPccD	Loop while equal	`if (cc && --ECX) goto lbl;`, cc = Z(ero), E(qual), NonZero, N(on)E(qual)
MOV to/from CR/DR/TR	Move to/from special registers	CR=control registers, DR=debug registers, TR=test registers (up to 80486)
MOVSD	Move string double-word	`(dword)ES:EDI±± = (dword*)ESI±±;` (±± depends on DF)
MOVSX	Move with sign-extension	`(long)r = (signed char) r/m;` and similar
MOVZX	Move with zero-extension	`(long)r = (unsigned char) r/m;` and similar
OUTSD	Output to port from string double-word	`port[DX] = (long)ESI±±;` (±± depends on DF)
POPAD	Pop all double-word (32-bit) registers from stack	Does not pop register ESP off of stack
POPFD	Pop data into EFLAGS register
PUSHAD	Push all double-word (32-bit) registers onto stack
PUSHFD	Push EFLAGS register onto stack
SCASD	Scan string data double-word
SETcc	Set byte to one on condition, zero otherwise	(`SETA, SETAE, SETB, SETBE, SETC, SETE, SETG, SETGE, SETL, SETLE, SETNA, SETNAE, SETNB, SETNBE, SETNC, SETNE, SETNG, SETNGE, SETNL, SETNLE, SETNO, SETNP, SETNS, SETNZ, SETO, SETP, SETPE, SETPO, SETS, SETZ`)
SHLD	Shift left double-word
SHRD	Shift right double-word	`r1 = r1>>CL ∣ r2<<(32-CL);` Instead of CL, immediate 1 can be used
STOSD	Store string double-word	`*ES:EDI±± = EAX;` (±± depends on DF, ES cannot be overridden)

Added with 80486

Instruction	Meaning	Notes
BSWAP	Byte Swap	`r = r<<24 \| r<<8&0x00FF0000 \| r>>8&0x0000FF00 \| r>>24;` Only works for 32 bit registers
CMPXCHG	atomic CoMPare and eXCHanGe	See Compare-and-swap / on later 80386 as undocumented opcode available
INVD	Invalidate Internal Caches	Flush internal caches
INVLPG	Invalidate TLB Entry	Invalidate TLB Entry for page that contains data specified
WBINVD	Write Back and Invalidate Cache	Writes back all modified cache lines in the processor's internal cache to main memory and invalidates the internal caches.
XADD	eXchange and ADD	Exchanges the first operand with the second operand, then loads the sum of the two values into the destination operand.

Added with Pentium

Instruction	Meaning	Notes
CPUID	CPU IDentification	Returns data regarding processor identification and features, and returns data to the EAX, EBX, ECX, and EDX registers. Instruction functions specified by the EAX register.^[1] This was also added to later 80486 processors
CMPXCHG8B	CoMPare and eXCHanGe 8 bytes	Compare EDX:EAX with m64. If equal, set ZF and load ECX:EBX into m64. Else, clear ZF and load m64 into EDX:EAX.
RDMSR	ReaD from Model-specific register	Load MSR specified by ECX into EDX:EAX
RDTSC	ReaD Time Stamp Counter	Returns the number of processor ticks since the processor being "ONLINE" (since the last power on of system)
WRMSR	WRite to Model-Specific Register	Write the value in EDX:EAX to MSR specified by ECX
RSM [1]	Resume from System Management Mode	This was introduced by the i386SL and later and is also in the i486SL and later. Resumes from System Management Mode (SMM)

Added with Pentium MMX

Instruction	Meaning	Notes
RDPMC	Read the PMC [Performance Monitoring Counter]	Specified in the ECX register into registers EDX:EAX

Also MMX registers and MMX support instructions were added. They are usable for both integer and floating point operations, see below.

Added with AMD K6

Instruction	Meaning	Notes
SYSCALL		functionally equivalent to SYSENTER
SYSRET		functionally equivalent to SYSEXIT

AMD changed the CPUID detection bit for this feature from the K6-II on.

Added with Pentium Pro

Instruction	Meaning	Notes
CMOVcc	Conditional move	(CMOVA, CMOVAE, CMOVB, CMOVBE, CMOVC, CMOVE, CMOVG, CMOVGE, CMOVL, CMOVLE, CMOVNA, CMOVNAE, CMOVNB, CMOVNBE, CMOVNC, CMOVNE, CMOVNG, CMOVNGE, CMOVNL, CMOVNLE, CMOVNO, CMOVNP, CMOVNS, CMOVNZ, CMOVO, CMOVP, CMOVPE, CMOVPO, CMOVS, CMOVZ)
SYSENTER	SYStem call ENTER
SYSEXIT	SYStem call EXIT
UD2	Undefined Instruction	Generates an invalid opcode. This instruction is provided for software testing to explicitly generate an invalid opcode. The opcode for this instruction is reserved for this purpose.

Added with SSE

Instruction	Meaning	Notes
MASKMOVQ	Masked Move of Quadword	Selectively write bytes from mm1 to memory location using the byte mask in mm2
MOVNTPS	Move Aligned Four Packed Single-FP Non Temporal	Move packed single-precision floating-point values from xmm to m128, minimizing pollution in the cache hierarchy.
MOVNTQ	Move Quadword Non-Temporal
PREFETCH0	Prefetch Data from Address	Prefetch into all cache levels
PREFETCH1	Prefetch Data from Address	Prefetch into all cache levels EXCEPT L1
PREFETCH2	Prefetch Data from Address	Prefetch into all cache levels EXCEPT L1 and L2
PREFETCHNTA	Prefetch Data from Address	Prefetch into all cache levels to non-temporal cache structure
SFENCE	Store Fence	Processor hint to make sure all store operations that took place prior to the SFENCE call are globally visible

Added with SSE2

Instruction	Meaning	Notes
CLFLUSH	Cache Line Flush	Invalidates the cache line that contains the linear address specified with the source operand from all levels of the processor cache hierarchy
LFENCE	Load Fence	Serializes load operations.
MASKMOVDQU	Masked Move of Double Quadword Unaligned	Stores selected bytes from the source operand (first operand) into a 128-bit memory location
MFENCE	Memory Fence	Performs a serializing operation on all load and store instructions that were issued prior the MFENCE instruction.
MOVNTDQ	Move Double Quadword Non-Temporal	Move double quadword from xmm to m128, minimizing pollution in the cache hierarchy.
MOVNTI	Move Doubleword Non-Temporal	Move doubleword from r32 to m32, minimizing pollution in the cache hierarchy.
MOVNTPD	Move Packed Double-Precision Floating-Point Values Non-Temporal	Move packed double-precision floating-point values from xmm to m128, minimizing pollution in the cache hierarchy.
PAUSE	Provides a hint to the processor that the following code is a spin loop	for cacheability

Added with SSE3

Instruction	Meaning	Notes
`MONITOR EAX, ECX, EDX`	Setup Monitor Address	Sets up a linear address range to be monitored by hardware and activates the monitor.
`MWAIT EAX, ECX`	Monitor Wait	Processor hint to stop instruction execution and enter an implementation-dependent optimized state until occurrence of a class of events.

Added with x86-64

Instruction	Meaning	Notes
CDQE	Sign extend EAX into RAX
CQO	Sign extend RAX into RDX:RAX
CMPSQ	CoMPare String Quadword
CMPXCHG16B	CoMPare and eXCHanGe 16 Bytes
IRETQ	64-bit Return from Interrupt
JRCXZ	Jump if RCX is zero
LODSQ	LOaD String Quadword
MOVSXD	MOV with Sign Extend 32-bit to 64-bit
POPFQ	POP RFLAGS Register
PUSHFQ	PUSH RFLAGS Register
RDTSCP	ReaD Time Stamp Counter and Processor ID
SCASQ	SCAn String Quadword
STOSQ	STOre String Quadword
SWAPGS	Exchange GS base with KernelGSBase MSR

Added with AMD-V

Instruction	Meaning	Notes
CLGI	Clear Global Interrupt Flag	Clears the GIF
INVLPGA	Invalidate TLB entry in a specified ASID	Invalidates the TLB mapping for the virtual page specified in RAX and the ASID specified in ECX.
MOV(CRn)	Move to or from control registers	Moves 32- or 64-bit contents to control register and vice versa.
SKINIT	Secure Init and Jump with Attestation	Verifiable startup of trusted software based on secure hash comparison
STGI	Set Global Interrupt Flag	Sets the GIF.
VMLOAD	Load state From VMCB	Loads a subset of processor state from the VMCB specified by the physical address in the RAX register.
VMMCALL	Call VMM	Used exclusively to communicate with VMM
VMRUN	Run virtual machine	Performs a switch to the guest OS.
VMSAVE	Save state To VMCB	Saves additional guest state to VMCB.

Added with Intel VT-x

VMPTRLD, VMPTRST, VMCLEAR, VMREAD, VMWRITE, VMCALL, VMLAUNCH, VMRESUME, VMXOFF, VMXON

Added with ABM

LZCNT, POPCNT (POPulation CouNT) - advanced bit manipulation

Added with BMI1

ANDN, BEXTR, BLSI, BLSMSK, BLSR, TZCNT

Added with BMI2

BZHI, MULX, PDEP, PEXT, RORX, SARX, SHRX, SHLX

Added with TBM

BEXTR, BLCFILL, BLCI, BLCIC, BLCMASK, BLCS, BLSFILL, BLSIC, T1MSKC, TZMSK

x87 floating-point instructions

Original 8087 instructions

Instruction	Meaning	Notes
F2XM1	$2^x - 1$	more precise than $2^x$ for $x$ close to zero
FABS	Absolute value
FADD	Add
FADDP	Add and pop
FBLD	Load BCD
FBSTP	Store BCD and pop
FCHS	Change sign
FCLEX	Clear exceptions
FCOM	Compare
FCOMP	Compare and pop
FCOMPP	Compare and pop twice
FDECSTP	Decrement floating point stack pointer
FDISI	Disable interrupts	8087 only, otherwise FNOP
FDIV	Divide	Pentium FDIV bug
FDIVP	Divide and pop
FDIVR	Divide reversed
FDIVRP	Divide reversed and pop
FENI	Enable interrupts	8087 only, otherwise FNOP
FFREE	Free register
FIADD	Integer add
FICOM	Integer compare
FICOMP	Integer compare and pop
FIDIV	Integer divide
FIDIVR	Integer divide reversed
FILD	Load integer
FIMUL	Integer multiply
FINCSTP	Increment floating point stack pointer
FINIT	Initialize floating point processor
FIST	Store integer
FISTP	Store integer and pop
FISUB	Integer subtract
FISUBR	Integer subtract reversed
FLD	Floating point load
FLD1	Load 1.0 onto stack
FLDCW	Load control word
FLDENV	Load environment state
FLDENVW	Load environment state, 16-bit
FLDL2E	Load $log 2 (e)$ onto stack
FLDL2T	Load $log 2 (10)$ onto stack
FLDLG2	Load $log 10 (2)$ onto stack
FLDLN2	Load $ln(2)$ onto stack
FLDPI	Load $π$ onto stack
FLDZ	Load 0.0 onto stack
FMUL	Multiply
FMULP	Multiply and pop
FNCLEX	Clear exceptions, no wait
FNDISI	Disable interrupts, no wait	8087 only, otherwise FNOP
FNENI	Enable interrupts, no wait	8087 only, otherwise FNOP
FNINIT	Initialize floating point processor, no wait
FNOP	No operation
FNSAVE	Save FPU state, no wait, 8-bit
FNSAVEW	Save FPU state, no wait, 16-bit
FNSTCW	Store control word, no wait
FNSTENV	Store FPU environment, no wait
FNSTENVW	Store FPU environment, no wait, 16-bit
FNSTSW	Store status word, no wait
FPATAN	Partial arctangent
FPREM	Partial remainder
FPTAN	Partial tangent
FRNDINT	Round to integer
FRSTOR	Restore saved state
FRSTORW	Restore saved state	Perhaps not actually available in 8087
FSAVE	Save FPU state
FSAVEW	Save FPU state, 16-bit
FSCALE	Scale by factor of 2
FSQRT	Square root
FST	Floating point store
FSTCW	Store control word
FSTENV	Store FPU environment
FSTENVW	Store FPU environment, 16-bit
FSTP	Store and pop
FSTSW	Store status word
FSUB	Subtract
FSUBP	Subtract and pop
FSUBR	Reverse subtract
FSUBRP	Reverse subtract and pop
FTST	Test for zero
FWAIT	Wait while FPU is executing
FXAM	Examine condition flags
FXCH	Exchange registers
FXTRACT	Extract exponent and significand
FYL2X	$y \cdot log 2 x$	if $y = log b 2$ , then the base- $b$ logarithm is computed
FYL2XP1	$y \cdot log 2 (x +1)$	more precise than $log 2 z$ if x is close to zero

Added in specific processors

Added with 80287

Instruction	Meaning	Notes
FSETPM	Set protected mode	80287 only, otherwise FNOP

Added with 80387

Instruction	Meaning	Notes
FCOS	Cosine
FLDENVD	Load environment state, 32-bit
FSAVED	Save FPU state, 32-bit
FSTENVD	Store FPU environment, 32-bit
FPREM1	Partial remainder	Computes IEEE remainder
FRSTORD	Restore saved state, 32-bit
FSIN	Sine
FSINCOS	Sine and cosine
FSTENVD	Store FPU environment, 32-bit
FUCOM	Unordered compare
FUCOMP	Unordered compare and pop
FUCOMPP	Unordered compare and pop twice

Added with Pentium Pro

FCMOV variants: FCMOVB, FCMOVBE, FCMOVE, FCMOVNB, FCMOVNBE, FCMOVNE, FCMOVNU, FCMOVU
FCOMI variants: FCOMI, FCOMIP, FUCOMI, FUCOMIP

Added with SSE

FXRSTOR, FXSAVE

These are also supported on later Pentium IIs which do not contain SSE support

Added with SSE3

FISTTP (x87 to integer conversion with truncation regardless of status word)

Undocumented x87 instructions

FFREEP performs FFREE ST(i) and pop stack

SIMD instructions

MMX instructions

Added with Pentium MMX

Instruction	Meaning	Notes
EMMS	Empty MMX Technology State	Marks all x87 FPU registers for use by FPU
MOVD mm, r/m32	Move doubleword
MOVQ mm, r/m64	Move quadword
PACKSSDW mm1, mm2/m64	Pack doubleword to word (signed with saturation)
PACKSSWB mm1, mm2/m64	Pack word to byte (signed with saturation)
PACKUSWB mm1, mm2/m64	Pack word to byte (signed with unsaturation)
PADDB mm, mm/m64	Add packed byte integers
PADDW mm, mm/m64	Add packed word integers
PADDD mm, mm/m64	Add packed doubleword integers
PADDSB mm, mm/m64	Add packed signed byte integers and saturate
PADDSW mm, mm/m64	Add packed signed word integers and saturate
PADDUSB mm, mm/m64	Add packed unsigned byte integers and saturate
PADDUSW mm, mm/m64	Add packed unsigned word integers and saturate
PAND mm, mm/m64	Bitwise AND
PANDN mm, mm/m64	Bitwise AND NOT
POR mm, mm/m64	Bitwise OR
PXOR mm, mm/m64	Bitwise XOR
PCMPEQB mm, mm/m64	Compare packed byte integers for equality
PCMPEQW mm, mm/m64	Compare packed word integers for equality
PCMPEQD mm, mm/m64	Compare packed doubleword integers for equality
PCMPGTB mm, mm/m64	Compare packed signed byte integers for greater than
PCMPGTW mm, mm/m64	Compare packed signed word integers for greater than
PCMPGTD mm, mm/m64	Compare packed signed doubleword integers for greater than
PMADDWD mm, mm/m64	Multiply packed word integers, add adjacent doubleword results
PMULHW mm, mm/m64	Multiply packed signed word integers, store high 16 bit results
PMULLW mm, mm/m64	Multiply packed signed word integers, store low 16 bit results
PSLLW mm, mm/m64	Shift left word, shift in zeros
PSLLD mm, mm/m64	Shift left doubleword, shift in zeros
PSLLQ mm, mm/m64	Shift left quadword, shift in zeros
PSRAD mm, mm/m64	Shift right doubleword, shift in sign bits
PSRAW mm, mm/m64	Shift right word, shift in sign bits
PSRLW mm, mm/m64	Shift right word, shift in zeros
PSRLD mm, mm/m64	Shift right doubleword, shift in zeros
PSRLQ mm, mm/m64	Shift right quadword, shift in zeros
PSUBB mm, mm/m64	Subtract packed byte integers
PSUBW mm, mm/m64	Subtract packed word integers
PSUBD mm, mm/m64	Subtract packed doubleword integers
PSUBSB mm, mm/m64	Subtract packed signed byte integers with saturation
PSUBSW mm, mm/m64	Subtract packed signed word integers with saturation
PSUBUSB mm, mm/m64	Subtract packed unsigned byte integers with saturation
PSUBUSW mm, mm/m64	Subtract packed unsigned word integers with saturation
PUNPCKHBW mm, mm/m64	Unpack and interleave high-order bytes
PUNPCKHWD mm, mm/m64	Unpack and interleave high-order words
PUNPCKHDQ mm, mm/m64	Unpack and interleave high-order doublewords
PUNPCKLBW mm, mm/m64	Unpack and interleave low-order bytes
PUNPCKLDQ mm, mm/m64	Unpack and interleave low-order words
PUNPCKLWD mm, mm/m64	Unpack and interleave low-order doublewords

MMX+ instructions

Added with Athlon

Same as the SSE SIMD integer instructions which operated on MMX registers.

EMMX instructions

EMMI instructions

(added with 6x86MX from Cyrix, deprecated now)

PAVEB, PADDSIW, PMAGW, PDISTIB, PSUBSIW, PMVZB, PMULHRW, PMVNZB, PMVLZB, PMVGEZB, PMULHRIW, PMACHRIW

3DNow! instructions

Added with K6-2

FEMMS, PAVGUSB, PF2ID, PFACC, PFADD, PFCMPEQ, PFCMPGE, PFCMPGT, PFMAX, PFMIN, PFMUL, PFRCP, PFRCPIT1, PFRCPIT2, PFRSQIT1, PFRSQRT, PFSUB, PFSUBR, PI2FD, PMULHRW, PREFETCH, PREFETCHW

3DNow!+ instructions

Added with Athlon and K6-2+

PF2IW, PFNACC, PFPNACC, PI2FW, PSWAPD

Added with Geode GX

PFRSQRTV, PFRCPV

SSE instructions

Added with Pentium III

SSE SIMD floating-point instructions

ADDPS, ADDSS, CMPPS, CMPSS, COMISS, CVTPI2PS, CVTPS2PI, CVTSI2SS, CVTSS2SI, CVTTPS2PI, CVTTSS2SI, DIVPS, DIVSS, LDMXCSR, MAXPS, MAXSS, MINPS, MINSS, MOVAPS, MOVHLPS, MOVHPS, MOVLHPS, MOVLPS, MOVMSKPS, MOVNTPS, MOVSS, MOVUPS, MULPS, MULSS, RCPPS, RCPSS, RSQRTPS, RSQRTSS, SHUFPS, SQRTPS, SQRTSS, STMXCSR, SUBPS, SUBSS, UCOMISS, UNPCKHPS, UNPCKLPS

SSE SIMD integer instructions

ANDNPS, ANDPS, ORPS, PAVGB, PAVGW, PEXTRW, PINSRW, PMAXSW, PMAXUB, PMINSW, PMINUB, PMOVMSKB, PMULHUW, PSADBW, PSHUFW, XORPS

Instruction	Opcode	Meaning
MOVUPS xmm1, xmm2/m128	0F 10 /r	Move Unaligned Packed Single-Precision Floating-Point Values
MOVSS xmm1, xmm2/m32	F3 0F 10 /r	Move Scalar Single-Precision Floating-Point Values
MOVUPS xmm2/m128, xmm1	0F 11 /r	Move Unaligned Packed Single-Precision Floating-Point Values
MOVSS xmm2/m32, xmm1	F3 0F 11 /r	Move Scalar Single-Precision Floating-Point Values
MOVLPS xmm, m64	0F 12 /r	Move Low Packed Single-Precision Floating-Point Values
MOVHLPS xmm1, xmm2	0F 12 /r	Move Packed Single-Precision Floating-Point Values High to Low
MOVLPS m64, xmm	0F 13 /r	Move Low Packed Single-Precision Floating-Point Values
UNPCKLPS xmm1, xmm2/m128	0F 14 /r	Unpack and Interleave Low Packed Single-Precision Floating-Point Values
UNPCKHPS xmm1, xmm2/m128	0F 15 /r	Unpack and Interleave High Packed Single-Precision Floating-Point Values
MOVHPS xmm, m64	0F 16 /r	Move High Packed Single-Precision Floating-Point Values
MOVLHPS xmm1, xmm2	0F 16 /r	Move Packed Single-Precision Floating-Point Values Low to High
MOVHPS m64, xmm	0F 17 /r	Move High Packed Single-Precision Floating-Point Values
PREFETCHNTA	0F 18 /0	Prefetch Data Into Caches (non-temporal data with respect to all cache levels)
PREFETCHT0	0F 18 /1	Prefetch Data Into Caches (temporal data)
PREFETCHT1	0F 18 /2	Prefetch Data Into Caches (temporal data with respect to first level cache)
PREFETCHT2	0F 18 /3	Prefetch Data Into Caches (temporal data with respect to second level cache)
NOP	0F 1F /0	No Operation
MOVAPS xmm1, xmm2/m128	0F 28 /r	Move Aligned Packed Single-Precision Floating-Point Values
MOVAPS xmm2/m128, xmm1	0F 29 /r	Move Aligned Packed Single-Precision Floating-Point Values
CVTPI2PS xmm, mm/m64	0F 2A /r	Convert Packed Dword Integers to Packed Single-Precision FP Values
CVTSI2SS xmm, r/m32	F3 0F 2A /r	Convert Dword Integer to Scalar Single-Precision FP Value
MOVNTPS m128, xmm	0F 2B /r	Store Packed Single-Precision Floating-Point Values Using Non-Temporal Hint
CVTTPS2PI mm, xmm/m64	0F 2C /r	Convert with Truncation Packed Single-Precision FP Values to Packed Dword Integers
CVTTSS2SI r32, xmm/m32	F3 0F 2C /r	Convert with Truncation Scalar Single-Precision FP Value to Dword Integer
CVTPS2PI mm, xmm/m64	0F 2D /r	Convert Packed Single-Precision FP Values to Packed Dword Integers
CVTSS2SI r32, xmm/m32	F3 0F 2D /r	Convert Scalar Single-Precision FP Value to Dword Integer
UCOMISS xmm1, xmm2/m32	0F 2E /r	Unordered Compare Scalar Single-Precision Floating-Point Values and Set EFLAGS
COMISS xmm1, xmm2/m32	0F 2F /r	Compare Scalar Ordered Single-Precision Floating-Point Values and Set EFLAGS
SQRTPS xmm1, xmm2/m128	0F 51 /r	Compute Square Roots of Packed Single-Precision Floating-Point Values
SQRTSS xmm1, xmm2/m32	F3 0F 51 /r	Compute Square Root of Scalar Single-Precision Floating-Point Value
RSQRTPS xmm1, xmm2/m128	0F 52 /r	Compute Reciprocal of Square Root of Packed Single-Precision Floating-Point Value
RSQRTSS xmm1, xmm2/m32	F3 0F 52 /r	Compute Reciprocal of Square Root of Scalar Single-Precision Floating-Point Value
RCPPS xmm1, xmm2/m128	0F 53 /r	Compute Reciprocal of Packed Single-Precision Floating-Point Values
RCPSS xmm1, xmm2/m32	F3 0F 53 /r	Compute Reciprocal of Scalar Single-Precision Floating-Point Values
ANDPS xmm1, xmm2/m128	0F 54 /r	Bitwise Logical AND of Packed Single-Precision Floating-Point Values
ANDNPS xmm1, xmm2/m128	0F 55 /r	Bitwise Logical AND NOT of Packed Single-Precision Floating-Point Values
ORPS xmm1, xmm2/m128	0F 56 /r	Bitwise Logical OR of Single-Precision Floating-Point Values
XORPS xmm1, xmm2/m128	0F 57 /r	Bitwise Logical XOR for Single-Precision Floating-Point Values
ADDPS xmm1, xmm2/m128	0F 58 /r	Add Packed Single-Precision Floating-Point Values
ADDSS xmm1, xmm2/m32	F3 0F 58 /r	Add Scalar Single-Precision Floating-Point Values
MULPS xmm1, xmm2/m128	0F 59 /r	Multiply Packed Single-Precision Floating-Point Values
MULSS xmm1, xmm2/m32	F3 0F 59 /r	Multiply Scalar Single-Precision Floating-Point Values
SUBPS xmm1, xmm2/m128	0F 5C /r	Subtract Packed Single-Precision Floating-Point Values
SUBSS xmm1, xmm2/m32	F3 0F 5C /r	Subtract Scalar Single-Precision Floating-Point Values
MINPS xmm1, xmm2/m128	0F 5D /r	Return Minimum Packed Single-Precision Floating-Point Values
MINSS xmm1, xmm2/m32	F3 0F 5D /r	Return Minimum Scalar Single-Precision Floating-Point Values
DIVPS xmm1, xmm2/m128	0F 5E /r	Divide Packed Single-Precision Floating-Point Values
DIVSS xmm1, xmm2/m32	F3 0F 5E /r	Divide Scalar Single-Precision Floating-Point Values
MAXPS xmm1, xmm2/m128	0F 5F /r	Return Maximum Packed Single-Precision Floating-Point Values
MAXSS xmm1, xmm2/m32	F3 0F 5F /r	Return Maximum Scalar Single-Precision Floating-Point Values
PSHUFW mm1, mm2/m64, imm8	0F 70 /r ib	Shuffle Packed Words
LDMXCSR m32	0F AE /2	Load MXCSR Register State
STMXCSR m32	0F AE /3	Store MXCSR Register State
SFENCE	0F AE /7	Store Fence
CMPPS xmm1, xmm2/m128, imm8	0F C2 /r ib	Compare Packed Single-Precision Floating-Point Values
CMPSS xmm1, xmm2/m32, imm8	F3 0F C2 /r ib	Compare Scalar Single-Precision Floating-Point Values
PINSRW mm, r32/m16, imm8	0F C4 /r	Insert Word
PEXTRW r32, mm, imm8	0F C5 /r	Extract Word
SHUFPS xmm1, xmm2/m128, imm8	0F C6 /r ib	Shuffle Packed Single-Precision Floating-Point Values
PMOVMSKB r32, mm	0F D7 /r	Move Byte Mask
PMINUB mm1, mm2/m64	0F DA /r	Minimum of Packed Unsigned Byte Integers
PMAXUB mm1, mm2/m64	0F DE /r	Maximum of Packed Unsigned Byte Integers
PAVGB mm1, mm2/m64	0F E0 /r	Average Packed Integers
PAVGW mm1, mm2/m64	0F E3 /r	Average Packed Integers
PMULHUW mm1, mm2/m64	0F E4 /r	Multiply Packed Unsigned Integers and Store High Result
MOVNTQ m64, mm	0F E7 /r	Store of Quadword Using Non-Temporal Hint
PMINSW mm1, mm2/m64	0F EA /r	Minimum of Packed Signed Word Integers
PMAXSW mm1, mm2/m64	0F EE /r	Maximum of Packed Signed Word Integers
PSADBW mm1, mm2/m64	0F F6 /r	Compute Sum of Absolute Differences
MASKMOVQ mm1, mm2	0F F7 /r	Store Selected Bytes of Quadword

SSE2 instructions

Added with Pentium 4 Also see integer instructions added with Pentium 4

SSE2 SIMD floating-point instructions

Instruction	Opcode	Meaning
ADDPD xmm1, xmm2/m128	66 0F 58 /r	Add Packed Double-Precision Floating-Point Values
ADDSD xmm1, xmm2/m64	F2 0F 58 /r	Add Low Double-Precision Floating-Point Value
ANDNPD xmm1, xmm2/m128	66 0F 55 /r	Bitwise Logical AND NOT
CMPPD xmm1, xmm2/m128, imm8	66 0F C2 /r ib	Compare Packed Double-Precision Floating-Point Values
CMPSD xmm1, xmm2/m64, imm8	F2 0F C2 /r ib	Compare Low Double-Precision Floating-Point Values

ADDPD, ADDSD, ANDNPD, ANDPD, CMPPD, CMPSD*, COMISD, CVTDQ2PD, CVTDQ2PS, CVTPD2DQ, CVTPD2PI, CVTPD2PS, CVTPI2PD, CVTPS2DQ, CVTPS2PD, CVTSD2SI, CVTSD2SS, CVTSI2SD, CVTSS2SD, CVTTPD2DQ, CVTTPD2PI, CVTTPS2DQ, CVTTSD2SI, DIVPD, DIVSD, MAXPD, MAXSD, MINPD, MINSD, MOVAPD, MOVHPD, MOVLPD, MOVMSKPD, MOVSD*, MOVUPD, MULPD, MULSD, ORPD, SHUFPD, SQRTPD, SQRTSD, SUBPD, SUBSD, UCOMISD, UNPCKHPD, UNPCKLPD, XORPD

CMPSD and MOVSD have the same name as the string instruction mnemonics CMPSD (CMPS) and MOVSD (MOVS); however, the former refer to scalar double-precision floating-points whereas the latters refer to doubleword strings.

SSE2 SIMD integer instructions

Instruction	Meaning
MOVDQ2Q	Move low quadword from XMM to MMX register.
MOVDQA	Move aligned double quadword
MOVDQU	Move unaligned double quadword
MOVQ2DQ	Move quadword from MMX register to low quadword of XMM register.
PADDQ	Add packed quadword integers.
PSUBQ	Subtract packed quadword integers.
PMULUDQ	Multiply packed unsigned doubleword integers
PSHUFHW	Shuffle packed high words.
PSHUFLW	Shuffle packed low words.
PSHUFD	Shuffle packed doublewords.
PSLLDQ	Packed shift left logical double quadwords.
PSRLDQ	Packed shift right logical double quadwords.
PUNPCKHQDQ	Unpack and interleave high-order quadwords,
PUNPCKLQDQ	Interleave low quadwords,

SSE3 instructions

Added with Pentium 4 supporting SSE3 Also see integer and floating-point instructions added with Pentium 4 SSE3

SSE3 SIMD floating-point instructions

ADDSUBPD, ADDSUBPS (for Complex Arithmetic)
HADDPD, HADDPS, HSUBPD, HSUBPS (for Graphics)
MOVDDUP, MOVSHDUP, MOVSLDUP (for Complex Arithmetic)

SSE3 SIMD integer instructions

LDDQU (Instructionally equivalent to MOVDQU. For video encoding)

SSSE3 instructions

Added with Xeon 5100 series and initial Core 2

PSIGNW, PSIGND, PSIGNB
PSHUFB
PMULHRSW, PMADDUBSW
PHSUBW, PHSUBSW, PHSUBD
PHADDW, PHADDSW, PHADDD
PALIGNR
PABSW, PABSD, PABSB

SSE4 instructions

SSE4.1

Added with Core 2 manufactured in 45nm

SSE4.1 SIMD floating-point instructions

DPPS, DPPD
BLENDPS, BLENDPD, BLENDVPS, BLENDVPD
ROUNDPS, ROUNDSS, ROUNDPD, ROUNDSD
INSERTPS, EXTRACTPS

SSE4.1 SIMD integer instructions

MPSADBW
PHMINPOSUW
PMULLD, PMULDQ
PBLENDVB, PBLENDW
PMINSB, PMAXSB, PMINUW, PMAXUW, PMINUD, PMAXUD, PMINSD, PMAXSD
PINSRB, PINSRD/PINSRQ, PEXTRB, PEXTRW, PEXTRD/PEXTRQ
PMOVSXBW, PMOVZXBW, PMOVSXBD, PMOVZXBD, PMOVSXBQ, PMOVZXBQ, PMOVSXWD, PMOVZXWD, PMOVSXWQ, PMOVZXWQ, PMOVSXDQ, PMOVZXDQ
PTEST
PCMPEQQ
PACKUSDW
MOVNTDQA

SSE4a

Added with Phenom processors

EXTRQ/INSERTQ
MOVNTSD/MOVNTSS

SSE4.2

Added with Nehalem processors

CRC32
PCMPESTRI
PCMPESTRM
PCMPISTRI
PCMPISTRM
PCMPGTQ

FMA instructions

Instruction	Opcode	Meaning
VFMADDPD xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 69 /r /is4	Fused Multiply-Add of Packed Double-Precision Floating-Point Values
VFMADDPS xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 68 /r /is4	Fused Multiply-Add of Packed Single-Precision Floating-Point Values
VFMADDSD xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 6B /r /is4	Fused Multiply-Add of Scalar Double-Precision Floating-Point Values
VFMADDSS xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 6A /r /is4	Fused Multiply-Add of Scalar Single-Precision Floating-Point Values
VFMADDSUBPD xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 5D /r /is4	Fused Multiply-Alternating Add/Subtract of Packed Double-Precision Floating-Point Values
VFMADDSUBPS xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 5C /r /is4	Fused Multiply-Alternating Add/Subtract of Packed Single-Precision Floating-Point Values
VFMSUBADDPD xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 5F /r /is4	Fused Multiply-Alternating Subtract/Add of Packed Double-Precision Floating-Point Values
VFMSUBADDPS xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 5E /r /is4	Fused Multiply-Alternating Subtract/Add of Packed Single-Precision Floating-Point Values
VFMSUBPD xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 6D /r /is4	Fused Multiply-Subtract of Packed Double-Precision Floating-Point Values
VFMSUBPS xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 6C /r /is4	Fused Multiply-Subtract of Packed Single-Precision Floating-Point Values
VFMSUBSD xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 6F /r /is4	Fused Multiply-Subtract of Scalar Double-Precision Floating-Point Values
VFMSUBSS xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 6E /r /is4	Fused Multiply-Subtract of Scalar Single-Precision Floating-Point Values
VFNMADDPD xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 79 /r /is4	Fused Negative Multiply-Add of Packed Double-Precision Floating-Point Values
VFNMADDPS xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 78 /r /is4	Fused Negative Multiply-Add of Packed Single-Precision Floating-Point Values
VFNMADDSD xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 7B /r /is4	Fused Negative Multiply-Add of Scalar Double-Precision Floating-Point Values
VFNMADDSS xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 7A /r /is4	Fused Negative Multiply-Add of Scalar Single-Precision Floating-Point Values
VFNMSUBPD xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 7D /r /is4	Fused Negative Multiply-Subtract of Packed Double-Precision Floating-Point Values
VFNMSUBPS xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 7C /r /is4	Fused Negative Multiply-Subtract of Packed Single-Precision Floating-Point Values
VFNMSUBSD xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 7F /r /is4	Fused Negative Multiply-Subtract of Scalar Double-Precision Floating-Point Values
VFNMSUBSS xmm0, xmm1, xmm2, xmm3	C4E3 WvvvvL01 7E /r /is4	Fused Negative Multiply-Subtract of Scalar Single-Precision Floating-Point Values

Intel AES instructions

6 new instructions.

Instruction	Description
AESENC	Perform one round of an AES encryption flow
AESENCLAST	Perform the last round of an AES encryption flow
AESDEC	Perform one round of an AES decryption flow
AESDECLAST	Perform the last round of an AES decryption flow
AESKEYGENASSIST	Assist in AES round key generation
AESIMC	Assist in AES Inverse Mix Columns

Undocumented instructions

The x86 CPUs contain undocumented instructions which are implemented on the chips but not listed in some official documents. They can be found in various sources across the Internet, such as Ralf Brown's Interrupt List and at http://sandpile.org.

Mnemonic	Opcode	Description	Status
AAM imm8	D4 imm8	Divide AL by imm8, put the quotient in AH, and the remainder in AL	Available beginning with 8086, documented since Pentium (earlier documentation lists no arguments)
AAD imm8	D5 imm8	Multiplication counterpart of AAM	Available beginning with 8086, documented since Pentium (earlier documentation lists no arguments)
SALC	D6	Set AL depending on the value of the Carry Flag (a 1-byte alternative of SBB AL, AL)	Available beginning with 8086, but only documented since Pentium Pro.
ICEBP	F1	Single byte single-step exception / Invoke ICE	Available beginning with 80386, documented (as INT1) since Pentium Pro
Unknown mnemonic	0F 04	Exact purpose unknown, causes CPU hang. (the only way out is CPU reset)^[2] In some implementations, emulated through BIOS as a halting sequence.^[3]	Only available on 80286
LOADALL	0F 05	Loads All Registers from Memory Address 0x000800H	Only available on 80286
LOADALLD	0F 07	Loads All Registers from Memory Address ES:EDI	Only available on 80386
UD1	0F B9	Intentionally undefined instruction, but unlike UD2 this was not published

References

↑ ^1.0 ^1.1 Lua error in package.lua at line 80: module 'strict' not found.
↑ Lua error in package.lua at line 80: module 'strict' not found.
↑ Lua error in package.lua at line 80: module 'strict' not found.

Intel Software Developer's Manuals

External links

The 8086 / 80286 / 80386 / 80486 Instruction Set^{[dead link]}
Free IA-32 and x86-64 documentation, provided by Intel
Netwide Assembler Instruction List (from Netwide Assembler)
x86 Opcode and Instruction Reference

[:0-1] 1.0 ^1.1 Lua error in package.lua at line 80: module 'strict' not found.

[2] Lua error in package.lua at line 80: module 'strict' not found.

[3] Lua error in package.lua at line 80: module 'strict' not found.

[1]

[2]

[3]

v t e x86 assembly topics
Topics	Assembly language Comparison of assemblers Disassembler Instruction set Low-level programming language Machine code Microassembler x86 assembly language
x86 Assemblers	A86/A386 FASM GNU Assembler (GAS) High Level Assembly (HLA) Microsoft Macro Assembler (MASM) Netwide Assembler (NASM) Turbo Assembler (TASM) Open Watcom Assembler (WASM) Yasm
Programming issues	Call stack Flags Carry flag Direction flag Interrupt flag Overflow flag Zero flag Opcode Program counter Processor register x86 calling conventions x86 instruction listings x86 registers

x86 instruction listings

Contents

x86 integer instructions

Original 8086/8088 instructions

Added in specific processors

Added with 80186/80188

Added with 80286

Added with 80386

Added with 80486

Added with Pentium

Added with Pentium MMX

Added with AMD K6

Added with Pentium Pro

Added with SSE

Added with SSE2

Added with SSE3

Added with x86-64

Added with AMD-V

Added with Intel VT-x

Added with ABM

Added with BMI1

Added with BMI2

Added with TBM

x87 floating-point instructions

Original 8087 instructions

Added in specific processors

Added with 80287

Added with 80387

Added with Pentium Pro

Added with SSE

Added with SSE3

Undocumented x87 instructions

SIMD instructions

MMX instructions

Added with Pentium MMX

MMX+ instructions

Added with Athlon

EMMX instructions

EMMI instructions

3DNow! instructions

Added with K6-2

3DNow!+ instructions

Added with Athlon and K6-2+

Added with Geode GX

SSE instructions

SSE SIMD floating-point instructions

SSE SIMD integer instructions

SSE2 instructions

SSE2 SIMD floating-point instructions

SSE2 SIMD integer instructions

SSE3 instructions

SSE3 SIMD floating-point instructions

SSE3 SIMD integer instructions

SSSE3 instructions

SSE4 instructions

SSE4.1

SSE4.1 SIMD floating-point instructions

SSE4.1 SIMD integer instructions

SSE4a

SSE4.2

FMA instructions

Intel AES instructions

Undocumented instructions

See also

References

External links

Navigation menu

Search