Winchester Model 1887/1901

Winchester Model 1887 shotgun
Winchester Model 1887
Type	Shotgun
Place of origin	United States
Service history
Used by	Various law enforcement agencies, stagecoach companies, Militia groups in Brasil
Production history
Designer	John Browning
Designed	1887
Manufacturer	Winchester Repeating Arms Company
Produced	1887–1901; 1901–1920 (Model 1901)
Variants	M1901
Specifications
Weight	8 lbs. (3.6 kg)
Length	39¼ in. (997 mm)
Barrel length	20 in. (508 mm), 30 in. (762 mm)
Caliber	12-gauge, 10-gauge
Action	Lever-action
Feed system	5+2 round tubular magazine
Sights	front bead

The Winchester Model 1887 and Winchester Model 1901 were lever-action shotguns originally designed by famed American gun designer John Browning and produced by the Winchester Repeating Arms Company during the late 19th and early 20th centuries.

Overview

The Model 1887 was the first truly successful repeating shotgun. Its lever-action design was chosen at the behest of the Winchester Repeating Arms Company, best known at the time as manufacturers of lever-action firearms such as the Winchester model 1873. Designer John Browning suggested that a pump-action would be much more appropriate for a repeating shotgun, but Winchester management's position was that, at the time, the company was known as a "lever-action firearm company", and felt that their new shotgun must also be a lever-action for reasons of brand recognition. Browning responded by designing a breech-loading, rolling block lever-action. To Winchester's credit, however, they later introduced a Browning designed pump-action shotgun known as the Model 1893 (an early production version of the model 1897), after the introduction of smokeless powder.

Shotgun shells at the time used black powder as a propellant, and so the Model 1887 shotgun was designed and chambered for less powerful black powder shotshells. Both 10 and 12-gauge models were offered in the Model 1887. It was soon realized that the action on the M1887 was not strong enough to handle early smokeless powder shotshells, and so a redesign resulted in the stronger Winchester Model 1901, 10-gauge only, to handle the advent of the more powerful smokeless powder. A 12-gauge chambering was not offered, as Winchester did not want the Model 1901 to compete with their successful 12-gauge Model 1897 pump-action shotgun. Other distinguishing characteristics of the Model 1901 are:

• a two piece lever
• the Winchester trademark stamp was moved to the upper tang, behind the hammer
• serial numbers between 64,856 and 79,455

Although a technically sound gun design, the market for lever-action shotguns waned considerably, as John Browning had predicted, after the introduction of the Winchester 1897 and other contemporary pump-action shotguns. Model 1887 production totaled 64,855 units between 1887 and 1901. Between 1901 and 1920, an additional 14,600 Model 1901 shotguns were manufactured before the Model 1887/1901 product line was discontinued. Serial numbers for the Model 1901 started where the serial numbers of the Model 1887 left off at 64,856 and ran through number 79,455. Thus, only 14,600 Model 1901s were produced indicating the declining demand for the lever action design.

Reproduction

Over the years, a number of gun companies tried to produce Model 1887/1901 shotguns that could chamber modern, smokeless shotgun shells—largely for the cowboy action shooting discipline—but with little commercial success. Recently however, three firearm companies have successfully produced viable models for the commercial firearms market:

• ADI Limited of Australia, produced a small trial run of modern Model 1887/1901 shotguns, chambered for modern smokeless 12-gauge shotshells. This was ostensibly to exploit a loophole in newer tighter gun laws in Australia which prohibited semi-automatic rifles and shotguns and pump action shotguns, amongst others, but still allowed bolt-action and lever-action rifles and shotguns. Commercial production on this firearm by ADI was anticipated for 2007, following several years of delays due to distribution issues, but this has not yet happened.

• Chinese arms manufacturer Norinco currently produces the Model 1887 shotgun chambered for modern smokeless 12-gauge shells, a version of which (featuring a 20" barrel) is manufactured for the American firearms firm Interstate Arms Corporation (IAC) and exported for sale in the United States, Canada, and Australia. As the only legal repeating shotgun (besides Mossberg bolt-action shotguns) for non-Primary Producer firearms owners in Australia, it has proven very popular with hunters and sporting shooters alike. U.S. and Canadian sales, however, have been largely focused on cowboy action shooting participants, owing to the ready availability of affordable pump-action and semi-automatic shotguns in most parts of the U.S. and Canada. In recent years, this particular firearm has become popular with regular American and Canadian firearm owners.

• The Italian firm Chiappa Firearms manufactures modern reproductions of the Winchester Model 1887 series shotguns. The shotguns appeared on the Australian and the European firearms markets in late 2008. Chiappa’s replicas are offered with barrels ranging from 28 to 18.5 inches. They also offer a model with a rifled barrel and two models with pistol grips.

Portrayals in popular culture

• The Model 1887 was prominently used by the title character in the film Terminator 2: Judgment Day, portrayed by Arnold Schwarzenegger. One of the guns used in the film was modified to allow one-handed use of the lever.

• The Model 1887 makes an appearance in Call of Duty: Modern Warfare 2, Call of Duty: Modern Warfare 3, Far Cry 3 and Far Cry 4

External links

• IAC reproduction M1887 shotgun
• SecurityArms.Com