Oklahoma State Highway 56
|
|
||||
|---|---|---|---|---|
| Seminole Nation Highway | ||||
| 290x172px | ||||
| Route information | ||||
| Maintained by ODOT | ||||
| Length: | 86.7 mi[2] (139.5 km) | |||
| Existed: | August 28, 1929[1] – present | |||
| Major junctions | ||||
| West end: |     US-377/SH-3E/SH-39/SH-99 east of Konawa |
|||
| East end: |  US-75 in Okmulgee |
|||
| Highway system | ||||
|
||||
→State Highway 56 (abbreviated SH-56 or OK-56) is a state highway in the U.S. state of Oklahoma. The road serves Seminole County, Okfuskee County, and Okmulgee Counties in central and east-central Oklahoma. In Seminole County, it is also designated as the Seminole Nation Highway in honor of the contributions the Seminole Nation has made to the state of Oklahoma.[1]
SH-56 begins at an intersection with US-377 four miles (6 km) east of Konawa,[3] and extends to US-75 in Okmulgee. The highway's total length is 86.7 miles (139.5 km).[2]
SH-56 was first added to the state highway system in 1929. It was gradually extended to its present length between then and 1942.[1]
Route description
SH-56 begins at the junction of SH-39 and US-377/SH-3E/SH-99 four miles (6 km) east of Konawa. From here, the highway and heads east, curving through the hilly terrain of southeastern Seminole County.[4] The highway passes through the town of Sasakwa 10 miles (16 km) east of US-377.[3] At Sasakwa, the road turns north, crossing the Little River northeast of town and generally paralleling the Seminole–Hughes County county line. The highway then bisects the town of Wewoka, intersecting US-270 and concurring with its business loop. SH-56 also serves as the eastern terminus of SH-59 in Wewoka. North of the town, SH-56 intersects with SH-9. The highway continues north, intersecting SH-99A near Cromwell and interchanging with I-40 near the unincorporated community of Schoolton. After crossing I-40, SH-56 makes a long arc to the east, bringing it into Okfuskee County.[3]
Just east of the county line, SH-56 bridges the North Canadian River. South of Castle, the road intersects with SH-48. SH-56 then proceeds east into Okemah, the county seat, where it has a short concurrency with both US-62 and SH-27. The highway continues east from town, then turns north, before turning back to the east to pass through the unincorporated settlement of Okfuskee. East of Okfuskee, the highway enters Okmulgee County.
In Okmulgee County, SH-56 skirts the northern edge of Okmulgee Lake and serves Dripping Springs State Park. East of the lake, it passes through Okmulgee Wildlife Refuge and Deep Fork National Wildlife Refuge.[4] It then enters the city of Okmulgee. There, SH-56 comes to an end at US-75.
History
State Highway 56 traces its origins to August 28, 1929, its original date of commissioning. At that time, the highway only consisted of the portion of the route extending from the SH-99 junction (then SH-48) east to Sasakwa, thence north to end at SH-3 south of Wewoka.[1][5] The highway underwent its first extension just under two years later, on June 15, 1931, when it was extended to end at US-62 in Okemah.[1][6] The highway was extended to Okmulgee on April 13, 1942, bringing it to its current extent.[1][7] Other than minor realignments, the highway has undergone no further changes since 1942.
Junction list
| County | Location | mi[2] | km | Destinations | Notes |
|---|---|---|---|---|---|
| Seminole | | 0.0 | 0.0 |     US-377 / SH-3E / SH-39 / SH-99 |
Western terminus, eastern terminus of SH-39 |
| Wewoka | 23.1 | 37.2 |      US-270 / US-270 Bus. |
Eastern terminus of US-270 Bus., southern terminus of US-270 Bus. concurrency | |
| 24.2 | 38.9 |  SH-59 |
Eastern terminus of SH-59 | ||
| 25.1 | 40.4 | US-270 Bus. |
Northern terminus of US-270 Bus. concurrency | ||
| | 30.5 | 49.1 |  SH-9 |
||
| Cromwell | 38.6 | 62.1 |  SH-99A |
||
| Schoolton | 41.2 | 66.3 |  I‑40 |
I-40 exit 212 | |
| Okfuskee | | 47.2 | 76.0 |  SH-48 |
|
| Okemah | 51.8 | 83.4 |   US-62 / SH-27 |
Western terminus of US-62/SH-27 concurrency | |
| 52.1 | 83.8 | US-62 / SH-27 |
Eastern terminus of US-62/SH-27 concurrency | ||
| Okmulgee | Okmulgee | 86.7 | 139.5 |  US-75 |
Eastern terminus |
1.000 mi = 1.609 km; 1.000 km = 0.621 mi
|
|||||
Loop route
- SH-56 Loop is a bypass route around the northeast quadrant of Okmulgee, running from US-75 east and south to US-62. in Okmulgee from US-75, east and south to US-62. Although it shares its number with SH-56, it does not intersect its parent route. The highway provides access to OSU-Okmulgee. SH-56 Loop is 3.7 miles (6.0 km) long.[8] It was established on May 7, 1962.[1]
References
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.[self-published source]
- ↑ 3.0 3.1 3.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
External links
Script error: No such module "Attached KML".
