Low molecular weight heparin

In medicine, low-molecular-weight heparin (LMWH) is a class of anticoagulant medications. They are used in the prevention and treatment of venous thromboembolism (deep vein thrombosis and pulmonary embolism) and in the treatment of myocardial infarction.

Heparin is a naturally occurring polysaccharide that inhibits coagulation, the process that leads to thrombosis. Natural heparin consists of molecular chains of varying lengths, or molecular weights. Chains of varying molecular weights, from 5000 to over 40,000 Daltons, make up polydisperse pharmaceutical-grade heparin. LMWHs, in contrast, consist of only short chains of polysaccharide. LMWHs are defined as heparin salts having an average molecular weight of less than 8000 Da and for which at least 60% of all chains have a molecular weight less than 8000 Da. These are obtained by various methods of fractionation or depolymerisation of polymeric heparin.

Heparin derived from natural sources, mainly porcine intestine or bovine lung, can be administered therapeutically to prevent thrombosis. However, the effects of natural, or unfractionated heparin are more unpredictable than LMWH.

Anti-factor Xa activity

Coagulation cascade is a normal physiological process which aims at preventing significant blood loss or hemorrhage following vascular injury. Unfortunately, there are times when a blood clot (thrombus) will form when it is not needed. For instance, some high risk conditions such as prolonged immobilization, surgery, or cancer can increase the risk of developing a blood clot which can potentially lead to significant consequences.

The coagulation cascade consists of a series of steps in which a protease cleaves and subsequently activates the next protease in the sequence. Since each protease can activate several molecules of the next protease in the series, this biological cascade is amplified. The final result of these reactions is to convert fibrinogen, a soluble protein, to insoluble threads of fibrin. Together with platelets, the fibrin threads form a stable blood clot.

Antithrombin (AT), a serine protease inhibitor, is the major plasma inhibitor of coagulation proteases. LMWHs inhibit the coagulation process through binding to AT via a pentasaccharide sequence (see also heparin: mechanism of action). This binding leads to a conformational change of AT which accelerates its inhibition of activated factor X (factor Xa). Once dissociated, the LMWH is free to bind to another antithrombin molecule and subsequently inhibit more activated factor X. Unlike AT activated by Heparin, AT activated by LMWH cannot inhibit thrombin, but can only inhibit clotting factor Xa.

The effects of LMWHs cannot be acceptably measured using the partial thromboplastin time (PTT) or activated clotting time (ACT) tests. Rather, LMWH therapy is monitored by the anti-factor Xa assay, measuring anti-factor Xa activity. The methodology of an anti-factor Xa assay is that patient plasma is added to a known amount of excess factor Xa and excess antithrombin. If heparin or LMWH is present in the patient plasma, it will bind to antithrombin and form a complex with factor Xa, inhibiting it. The amount of residual factor Xa is inversely proportional to the amount of heparin/LMWH in the plasma. The amount of residual factor Xa is detected by adding a chromogenic substrate that mimics the natural substrate of factor Xa, making residual factor Xa cleave it, releasing a colored compound that can be detected by a spectrophotometer. Antithrombin deficiencies in the patient do not affect the assay, because excess amounts of antithrombin is provided in the reaction. Results are given in anticoagulant concentration in units/mL of antifactor Xa, such that high values indicate high levels of anticoagulation and low values indicate low levels of anticoagulation.

LMWHs have a potency of greater than 70 units/mg of anti-factor Xa activity and a ratio of anti-factor Xa activity to anti-thrombin activity of >1.5. (see table 1)

LMWH	Average molecular weight	Ratio anti-Xa/anti-IIa activity
Bemiparin	3600	8.0
Nadroparin	4300	3.3
Reviparin	4400	4.2
Enoxaparin	4500	3.9
Parnaparin	5000	2.3
Certoparin	5400	2.4
Dalteparin	5000	2.5
Tinzaparin	6500	1.6

Table 1 Molecular weight (MW) data and anticoagulant activities of currently available LMWH products. Adapted from Gray E et al. 2008.

Manufacturing process

Figure 1: The anhydromannose in IdoA(2S)-anhydromannose can be reduced to an anhydromannitol

Various methods of heparin depolymerisation are used in the manufacture of low-molecular-weight heparin. These are listed below:

• Oxidative depolymerisation with hydrogen peroxide. Used in the manufacture of ardeparin (Normiflo)
• Deaminative cleavage with isoamyl nitrite. Used in the manufacture of certoparin (Sandoparin)
• Alkaline beta-eliminative cleavage of the benzyl ester of heparin. Used in the manufacture of enoxaparin (Lovenox and Clexane)
• Oxidative depolymerisation with Cu²⁺ and hydrogen peroxide. Used in the manufacture of parnaparin (Fluxum)
• Beta-eliminative cleavage by the heparinase enzyme. Used in the manufacture of tinzaparin (Innohep and Logiparin)
• Deaminative cleavage with nitrous acid. Used in the manufacture of dalteparin (Fragmin), reviparin (Clivarin), and nadroparin (Fraxiparin)

Deaminative cleavage with nitrous acid results in the formation of an unnatural anhydromannose residue at the reducing terminal of the oligosaccharides produced. This can subsequently be converted to anhydromannitol using a suitable reducing agent as shown in figure 1.

Figure 2: UA(2S)-GlcNS(6S)

Likewise both chemical and enzymatic beta-elimination result in the formation of an unnatural unsaturated uronate residue(UA) at the non-reducing terminal, as shown in figure 2.

In addition, low molecular weight heparins can also be chemoenzymatically synthesized from simple disaccharides.

Differences between LMWHs

Comparisons between LMWHs prepared by similar processes vary. For example, a comparison of Dalteparin and Nadroparin suggests they are more similar than products produced by different processes. However, comparison of enoxaparin and tinzaparin shows they are very different from each other with respect to chemical, physical, and biological properties.

As might be expected, products prepared by distinctly different processes are dissimilar in physical, chemical, and biological properties. Hence a slight change in the depolymerisation process could result into substantial variation of the structure or composition of a given LMWH.

Therefore for every LMWH, a strictly defined depolymerisation procedure is needed to guarantee the sameness of the final LMWH product and the predictability of clinical outcomes. LMWHs, as biological origin products, rely on stringent manufacturing procedures to guarantee the absence of biological or chemical contamination. It is therefore critical to adopt stringent manufacturing practices, through rigorous quality assurance steps, to ensure the highest quality of the produced LMWHs and to guarantee patient safety. These quality assurance steps, to be effective, need to be implemented from the raw material (crude heparin) collection to the final LMWH product.

Due to these identified and potential differences, several organizations, including the United States Food and Drug Administration, the European Medicines Agency, and the World Health Organization, regard LMWHs as individual products that should not be considered as clinically equivalent, as they differ in many crucial aspects such as molecular, structural, physiochemical, and biological properties. According to international guidelines, the choice of an individual LMWH should be based on its proven clinical safety and efficacy for each indication.

Differences from unfractionated heparin

Differences from heparin (i.e. "unfractionated heparin") include:

• Average molecular weight: heparin is about 15 kDa and LMWH is about 4.5 kDa.
• Less frequent subcutaneous dosing than for heparin for postoperative prophylaxis of venous thromboembolism.
• Once or twice daily subcutaneous injection for treatment of venous thromboembolism and in unstable angina instead of intravenous infusion of high dose heparin.
• No need for monitoring of the APTT coagulation parameter as required for high dose heparin.
• Possibly a smaller risk of bleeding.
• Smaller risk of osteoporosis in long-term use.
• Smaller risk of heparin-induced thrombocytopenia, a potential side effect of heparin.
• The anticoagulant effects of heparin are typically reversible with protamine sulfate, while protamine's effect on LMWH is limited.
• Has less of an effect on thrombin compared to heparin, but about the same effect on Factor Xa.

Clinical uses

Because it can be given subcutaneously and does not require APTT monitoring, LMWH permits outpatient treatment of conditions such as deep vein thrombosis or pulmonary embolism that previously mandated inpatient hospitalization for unfractionated heparin administration.

Because LMWH has more predictable pharmacokinetics and anticoagulant effect, LMWH is recommended over unfractionated heparin for patients with massive pulmonary embolism, and for initial treatment of deep vein thrombosis. Prophylactic treatment of hospitalized medical patients with LMWH and similar anticoagulants results in a 53% reduction of risk for symptomatic deep vein thrombosis.

More recently these agents have been evaluated as anticoagulants in acute coronary syndrome (ACS) managed by percutaneous intervention (PCI).

The use of LMWH needs to be monitored closely in patients at extremes of weight or in-patients with renal dysfunction. An anti-factor Xa activity may be useful for monitoring anticoagulation. Given its renal clearance, LMWH may not be feasible in patients that have end-stage renal disease. LMWH can also be used to maintain the patency of cannulae and shunts in dialysis patients.

Venous thromboembolism and cancer

The CLOT study, published in 2003, showed that, in patients with malignancy and acute venous thromboembolism, dalteparin was more effective than coumadin in reducing the risk of recurrent embolic events. Use of LMWH in cancer patients for at least the first 3 to 6 months of long-term treatment is recommended in numerous guidelines and is now regarded as a standard of care.

Antidote

In clinical situations in which the antithrombotic effect of LMWHs needs to be neutralized, protamine is used to neutralize heparin by binding to it. Studies in animals and in vitro studies have demonstrated that protamine neutralizes the antithrombin activity of LMWHs, normalizing the aPTT and thrombin time. However, protamine appears to only partially neutralize the anti-factor Xa activity of LMWH. Because the molecular weight of heparin impacts its interaction with protamine, it is likely that the lack of complete neutralization of anti-factor Xa is due to a reduced protamine binding to the LMWHs moieties in the preparation. Protamine is a medicine that requires a high level of caution when used.

Contraindications

The use of LMWHs should be avoided in patients with known allergies to LMWHs, heparin, sulfites or benzyl alcohol, in patients with active major bleeding, or patients with a history of heparin-induced low blood platelet count (also known as heparin-induced thrombocytopenia or HIT). High treatment doses are counter indicated in acute bleedings such as cerebral or gastrointestinal haemorrhage. LMWHs are more dependent on renal function for their excretion than unfractionated heparin so their biological half-life may be prolonged in patients with renal failure and therefore their use in the setting of CrCl >30 mL/min may need to be avoided. Apart from using unfractionated heparin instead, it may be possible to reduce the dose and/or monitor the anti-Xa activity to guide treatment.

Precautions

LMWHs should be used with extreme caution in patients undergoing any procedure involving spinal anaesthesia/puncture, in conditions with increased risk of bleeding or in patients with a history of heparin-induced thrombocytopenia.

Side effects

The most common side-effects include bleeding, which could be severe or even fatal, allergic reactions, injection site reactions, and increases in liver enzyme tests, usually without symptoms. The use of heparin and LMWHs can sometimes be complicated by a decrease in platelet count, a complication known as Heparin Induced Thrombocytopenia.13 Two forms have been described: a clinically benign, non-immune and reversible form (Type I) and a rare, more serious immune-mediated form or Type II. HIT Type II is caused by the formation of auto antibodies that recognize complexes between heparin and platelet factor 4 (PF4) and is therefore associated with a substantial risk of thrombotic complications. The incidence is difficult to estimate but may reach up to 5% of patients treated with UFH or about 1% with LMWH.

Generics

The patents of LMWHs are expiring. Therefore, generic, or biosimilar, LMWHs are being produced by several companies. The first generic was approved by the Food and Drug Administration in July 2010. FDA has used 5 analytical and pharmacological criteria to establish the authenticity of a generic LMWH, without requiring clinical studies in patients.

The European Medicines Agency considers LMWHs as biological products in nature consisting of not fully characterised polysaccharide mixtures. Therefore the EMA requires that the efficacy and safety of a biosimilar LMWH candidate be established in a clinical trial with patients at high risk for thromboembolism.

External links

• Low Molecular Weight Heparin at the US National Library of Medicine Medical Subject Headings (MeSH)