AMD Am2900

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
File:KL AMD 2901.jpg
AMD Am2901: 4-Bit-Slice ALU

Am2900 is a family of integrated circuits (ICs) created in 1975 by Advanced Micro Devices (AMD). They were constructed with bipolar devices, in a bit-slice topology, and were designed to be used as modular components each representing a different aspect of a computer control unit (CCU). By using a bit slicing technique, Am2900 family was able to implement a CCU with data, addresses, and instructions to be any multiple of 4-bits by multiplying the number of ICs. One major problem with this modular technique was it required a larger amount of ICs to implement what could be done on a single CPU IC. The Am2901 chip was the arithmetic-logic unit (ALU), and the "core" of the series. It could count using 4 bits and implement binary operations as well as various bit-shifting operations.

The 2901 and some other chips in the family were second sourced by an unusually large number of other manufacturers, starting with Motorola and then Raytheon—both in 1975—and also Cypress Semiconductor, National Semiconductor, NEC, Thomson, Signetics, and Elektronika.[1]

Computers made with Am2900-family chips

There are probably many more, but here are some known machines using these parts:

  • The Apollo Computer Tern family: DN460, DN660 and DSP160. All used the same system board emulating the Mc68010 instruction set.[2]
  • The Itek Advanced Technology Airborne Computer (ATAC) used on the Galileo Attitude and Articulation Control Computer System and some Navy aircraft had a 16 register, 16-bit word width assembled from 4-bit-wide 2900 series processors. Four special instructions were added to the Galileo version of the ATAC, and later some chips were replaced with radiation-hardened 2901 chips.[3]
  • Data General Nova 4, which obtained 16-bit word width using four Am2901 ALUs in parallel; one of the boards had 15 Am2901 ALUs on it.[4]
  • Digital Equipment Corporation (DEC) PDP-11 models PDP-11/23, PDP-11/34, and PDP-11/44 floating-point options (FPF11, FP11-A and FP11-F, respectively)[5][6]
  • The Xerox Dandelion, the machine used in the Xerox Star and Xerox 1108 Lisp machine.[7]
  • Several models of the GEC 4000 series minicomputers: 4060, 4150, 4160 (four Am2901 each, 16-bit ALU), and 4090 and all 418x and 419x systems (eighteen Am2901 each, 32-bit integer ALU or 8-bit exponent, 64-bit Double Precision floating point ALU).[8]
  • The DEC KS10 PDP-10 model.[9]
  • The UCSD Pascal P-machine processor designed at NCR by Joel McCormack.
  • A number of MAI Basic Four machines.[10]
  • The Tektronix 4052 graphics system computer.
  • The SM-1420, Soviet clone of PDP-11, used Soviet clone of AM2901[11] perhaps also used in others.[12]
  • The Lilith computer designed at ETH Zürich by Niklaus Wirth.
  • Atari's vector graphics arcade machines Tempest, Battlezone, and Red Baron each used 4 Am2901 ICs in their "math box" auxiliary circuit boards.
  • Pixar Image Computer, 4 Channel Processors each with 4 Am2900's
  • Simulation Excel (Sim-X), Oslo, Norway: Typographical workstation / typesetter; one of its four processors was a 16-bit microcoded calculation and transformation engine built from four 2901 slices and one 2910 address sequencer. The Sim-X machine used a 16-bit integer multiplier to optimize graphical transformations.[13] The machine debuted in 1983 and the company shut down in 1987.
  • Eventide H949 Harmonizer; four Am2901 chips (and several microcode PROMs) are used to generate addresses and generate reference voltages for the DAC system — audio was not processed in the 2901 ALU section.
  • Many Siemens Teleperm and S5 PLCs used for industrial control were built using the 2900 series.
  • AT&T 3B20D processor.[14]
  • Metheus / Barco Omega 400 and 500 Series graphics systems; four Am2901 chips (and eight microcode PROMs) were used to perform graphics operations on this 1982 display processor.
  • Geac Computer Corporation 2000, 6000, 8000, and 9000 were all based on 4 x AM2901 chips. The GEAC 9500 was based on the AM29101. The GEAC 2000 was used in pharmacies. The other models were used in library, banking, and insurance automation. The 2000 was a single processor unit. The 6000 and 8000 contained four processors, each dedicated to one of comms, disk, tape, or program processing. The 8000 had local processor memory whereas the 6000 did not. The 9000 and 9500 were AMP systems with up to 8 CPU modules.

Members of the Am2900 family

AMD Am2903: 4-Bit-Slice ALU
AMD Am2909: 4-Bit-Slice Address Sequencer

Lua error in package.lua at line 80: module 'strict' not found.

The Am2900 Family Data Book lists:[15]

  • Am2901 – 4-bit bit-slice ALU (1975)
  • Am2902 – Look-Ahead Carry Generator
  • Am2903 – 4-bit-slice ALU, with hardware multiply
  • Am2904 – Status and Shift Control Unit
  • Am2905 – Bus Transceiver
  • Am2906 – Bus Transceiver with Parity
  • Am2907 – Bus Transceiver with Parity
  • Am2908 – Bus Transceiver with Parity
  • Am2909 – 4-bit-slice address sequencer
  • Am2910 – 12-bit address sequencer
  • Am2911 – 4-bit-slice address sequencer
  • Am2912 – Bus Transceiver
  • Am2913 – Priority Interrupt Expander
  • Am2914 – Priority Interrupt Controller
  • Am2915 – Quad 3-State Bus Transceiver
  • Am2916 – Quad 3-State Bus Transceiver
  • Am2917 – Quad 3-State Bus Transceiver
  • Am2918 – Instruction Register, Quad D Register
  • Am2919 – Instruction Register, Quad Register
  • Am2920 – Octal D-Type Flip-Flop
  • Am2921 – 1-to-8 Decoder
  • Am2922 – 8-Input Multiplexer (MUX)
  • Am2923 – 8-Input MUX
  • Am2924 – 3-Line to 8-Line Decoder
  • Am2925 – System Clock Generator and Driver
  • Am2926 – Schottky transistor 3-State Quad Bus Driver
  • Am2927/Am2928 – Quad 3-State Bus Transceiver
  • Am2929 – Schottky 3-State Quad Bus Driver
  • Am2930 – Main Memory Program Control
  • Am2932 – Main Memory Program Control
  • Am2940 – Direct Memory Addressing (DMA) Generator
  • Am2942 – Programmable Timer/Counter/DMA Generator
  • Am2946/Am2947 – Octal 3-State Bidirectional Bus Transceiver
  • Am2948/Am2949 – Octal 3-State Bidirectional Bus Transceiver
  • Am2950/Am2951 – 8-bit Bidirectional I/O Ports
  • Am2954/Am2955 – Octal Registers
  • Am2956/Am2957 – Octal Latches
  • Am2958/Am2959 – Octal Buffers/Line Drivers/Line Receivers
  • Am2960 – Cascadable 16-Bit Error Detection and Correction Unit
  • Am2961/Am2962 – 4-Bit Error Correction Multiple Buss Buffers
  • Am2964 – Dynamic Memory Controller
  • Am2965/Am2966 – Octal Dynamic Memory Driver, Image

Many of these chips also have 7400 series numbers such as the 74F2960 / Am2960.

See also

References

  1. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=AMD_Am2900&oldid=3109292"