Mercedes-Benz 9G-Tronic transmission
9G-Tronic | |
---|---|
Overview | |
Manufacturer | Daimler AG |
Production | 2013–present |
Body and chassis | |
Class | 9-speed longitudinal automatic transmission |
Chronology | |
Predecessor | Mercedes-Benz 7G-Tronic transmission |
9G-Tronic is Mercedes-Benz's trademark name for its nine-speed automatic transmission, starting off with the W9A 700 (Wandler-9-Gang-Automatik bis 700 Nm Eingangsdrehmoment; converter-9-gear-automatic with 516 lb-ft (700 Nm) maximum input torque; type 725.0) as core model.
Contents
Abstract
In all applications this transmission is identified as the New Automatic Gearbox Generation Three, or NAG3. Initially it debuted on the E 350 blueTEC in 2013,[1][2] before launched in the Mercedes-Benz S-Class (W222). It has been expanded to be used in the Mercedes-Benz C-Class (W205) and the sedan and wagon variants of the Mercedes-Benz E-Class (W213). This transmission was later introduced on Mercedes-Benz M-Class (W166) facelift on the GLE 250 d model. V12 engine models continue to use the older Mercedes-Benz 7G-Tronic transmission. By the end of 2018 unsurpassed ratio span among longitudinal automatic transmissions for passenger cars.
It is also fabricated by JATCO for use in Nissan and Infiniti vehicles, under the name JR913E.[3][4]
Specifications
Basic concept
Technical and economic progress is reflected in 9 forward gears[lower-alpha 1] out of 10 main components,[lower-alpha 2][5] compared to 7 forward gears[lower-alpha 3] out of 11 main components[lower-alpha 4] in the direct predecessor. It is fully electronic controlled. Torque converter lock-up can operate in all 9 forward gears.
Gear ratios
Gear Teeth and Ratios | Planetary Gearset: Teeth | Count | Total | Avg. | ||||||
---|---|---|---|---|---|---|---|---|---|---|
Model
Type |
First Delivery | Sun 1
Ring 1 |
Sun 2
Ring 2 |
Sun 3
Ring 3 |
Sun 4
Ring 4 |
Brakes
Clutches |
Ratio
Span |
Gear
Step |
||
Gear | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | R |
W9A ALL
725.0 |
2013[lower-alpha 5][5] | 46
98 |
44
100 |
36
84 |
34
86 |
3
3 |
9.1495 | 1.3188 | ||
Ratio | 5.5032
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{6,835}{1,242} |
3.3333
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{10}{3} |
2.3148
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{125}{54} |
1.6611
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{299}{180} |
1.2106
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{1,075}{888} |
1.0000
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{1}{1} |
0.8651
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{58,781}{67,944} |
0.7167
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{43}{60} |
0.6015
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{52,675}{87,576} |
- 4.9316
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): -\tfrac{6,125}{1,242} |
W9A ALL
725.0 |
2016[lower-alpha 6][6] | 46
98 |
44
100 |
37
83 |
34
86 |
3
3 |
8.9022 | 1.3143 | ||
Ratio | 5.3545
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{13,670}{2,553} |
3.2432
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{120}{37} |
2.2523
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{250}{111} |
1.6356
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{3,631}{2,220} |
1.2106
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{1,075}{888} |
1.0000
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{1}{1} |
0.8651
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{58,781}{67,944} |
0.7167
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{43}{60} |
0.6015
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{52,675}{87,576} |
- 4.7983
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): -\tfrac{12,250}{2,553} |
Ratio
odd |
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{(S_1 (S_2+R_2 ) + R_1 S_2 ) (S_3 + R_3 )}{S_1 (S_2+ R_2 ) S_3} | Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{R_2 (S_3+ R_3 )}{(S_2+R_2 ) S_3} | Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{R_2 R_4}{R_2 R_4- S_2 S_4} | Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{R_4 (S_1 (S_2+R_2 ) + R_1 S_2 )}{S_1 R_4 (S_2+R_2 ) + R_1 S_2 (S_4+ R_4 )} | Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{R_1 R_2 R_4}{(R_1 R_2 + S_1 (S_2+R_2 )) S_4+R_1 R_2 R_4} | |||||
Ratio
even · R |
Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{S_3+ R_3}{S_3} | Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{S_4 (S_3+R_3 ) + S_3 R_4}{S_3 (S_4+R_4 )} | Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{1}{1} | Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): \tfrac{R_4}{S_4+ R_4} | Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): -\tfrac{R_1 R_2 (S_3 + R_3 )}{S_1 (S_2+R_2 ) S_3} |
Nomogram
▶️ Interactive Nomogram
This nomogram is a real geometric calculator exactly representing the rotational speeds of the transmission's 3x4 = 12 internal shafts for each of its 9 ratios (+ reverse), grouped according to their 4 permanent coupling on 3 joint ordinates and 5 independent ordinates. These ordinates are positioned on the abscissa in strict accordance with the proportions of the sun gears' teeth numbers relative to those of their rings. Consequently, the output ratios on the 3rd ordinate (carrier of the third planetary gearset) follows closely those of the actual transmission. This advantageous geometric construction sets us free from Willis' famous and tedious formula, because all calculations are exclusively determined by lengths ratios, respectively teeth numbers on the abscissa for the 4 epicyclic ratios, and of rotational speeds on the 3rd ordinate for the 10 gear ratios.
This nomogram reflects the version from 2013.
Legend:
A : Brake (blocks s2 sun gear)
B : Brake (blocks r3 ring gear)
C : Brake (blocks c1 carrier gear)
D : Clutch (couples c3 carrier gear with r4 ring gear)
E : Clutch (couples c1 carrier gear with r2 ring gear)
F : Clutch (couples s1 sun gear with c1 carrier gear)
AMG SpeedShift
AMG SpeedShift TCT
The TCT transmission is essentially the 9G-Tronic automatic transmission including "Torque Converter Technology".
AMG SpeedShift MCT
Mercedes-AMG developed the 9-speed MCT "Multi Clutch Technology" planetary automatic transmission.
The MCT transmission is essentially the 9G-Tronic automatic transmission without a torque converter. Instead of a torque converter, it uses a compact wet startup clutch to launch the car from a stop and also supports computer-controlled double-clutching. The MCT (Multi-Clutch Technology) acronym refers to a planetary (automatic) transmission's multiple clutches and bands for each gear.
The MCT is fitted with four drive modes: “C” (Comfort), “S” (Sport), “S+” (Sport plus) and “M” (Manual) and boasts 100 millisecond shifts in "M" and "S+" modes. MCT-equipped cars are also fitted with the new AMG DRIVE UNIT with an innovative Race Start function. The AMG DRIVE UNIT is the central control unit for the AMG SPEEDSHIFT MCT 9-speed sports transmission and all driving dynamics functions. The driver can change gears either using the selector lever or by nudging the steering-wheel shift paddles. The new Race start Function is a launch control system that enables the driver to call on maximum acceleration while ensuring optimum traction of the driven wheels.
The new GLC 63 4MATIC+ and GLC 63 S 4MATIC+ feature the AMG SPEEDSHIFT MCT 9-speed transmission, which made its debut in the Mercedes-AMG E 63 4MATIC+. The driver benefits from extremely short shift/response times. Fast multiple downshifts and the double-declutching function make for a highly emotive gearshift experience. A start-off wet clutch replaces the torque converter. This saves weight and optimises the response to the driver's accelerator pedal input, particularly during acceleration and load changes.
Applications
Mercedes models
Mercedes C-Class
- 2015–2021 Mercedes-Benz W205 (all models)
- 2022– Mercedes-Benz W206
Mercedes E-Class
- 2014–2016 Mercedes-Benz W212 (E 350 BlueTec only) available as an option to others.
- 2016–present Mercedes-Benz W213 (all models)
Mercedes S-Class
- 2017–2021 Mercedes-Benz W222 (all except V12 models)
- 2021– Mercedes-Benz W223
Mercedes V-Class
- 2020–present V-Class (W447) (longitudinal engines)
Mercedes GLC-Class
- 2015–present GLC
Mercedes-Benz GLE-Class
- 2016–2019 GLE (W166) (except 63 AMG & 350 models)
- 2020–present GLE (W167) (except 63 models)
Mercedes-Benz GLS-Class
- 2017–2019 GLS (X166) (all except AMG)
- 2020–present GLS (X167)
Mercedes-Benz SLK-Class
- 2015–2020 SLC (R172) (except 55 AMG)
Mercedes-AMG models
Mercedes-AMG SL
- 2022–present AMG SL (R232)
Non Mercedes-Benz models
Manufactured by JATCO, Ltd as the JR913E under license from Daimler AG.
Nissan
- 2020– Nissan Titan
- 2020– Nissan Frontier
- 2023– Nissan Z
Infiniti
Aston Martin
See also
Notes
- ↑ plus 1 reverse gear
- ↑ 4 simple planetary gearsets, 3 brakes, 3 clutches
- ↑ plus 2 reverse gears
- ↑ 4 planetary gearsets (Ravigneaux planetary gearset considered as 2), 4 brakes, 3 clutches
- ↑ First version with a gear ratio span wider than 9:1 as widest among longitudinal automatic transmissions for passenger cars at that time
- ↑ Second version introduced without notice with the Mercedes-Benz E-Class (W213) to reduce the step between gear 4 and 5 below the one of the 7G-Tronic (1.3684:1)
References
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.