East Coast Main Trunk

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
East Coast Main Trunk
Overview
Type Main line
System New Zealand railway network
Locale North Island, New Zealand
Termini Hamilton
Kawerau
Operation
Owner New Zealand Railways Corporation
Operator(s) KiwiRail
Technical
Track gauge 1,067 mm (3 ft 6 in)
Route map
Northisland NZ East-Coast-Main-Trunk.png
East Coast Main Trunk
North Island Main Trunk
Hamilton Central
Waikato River
Claudelands
Ruakura
Cambridge Branch
Eureka
Motumaoho
Morrinsville
Thames BranchFormer route via Paeroa
Kiwitahi
Kereone
Walton
Kinleith Branch
Hemopo
Kaimai Tunnel
Whatakau
Former route via Paeroa
Apata
Pahoia
Omokoroa
Borell Road
Te Puna
Otumoetai
Port of Tauranga
Tauranga
Tauranga Harbour
Matapihi
Mount Maunganui Branch
Te Maunga Junction
Kairua
Papamoa
Te Puke
Rangiuru
Paengaroa
Maniatutu
Pongakawa
Pukehina
Ohinepanea
Otamarakau
Hauone
Pikowai
Matata
Awakaponga
Taneatua BranchMothballed
Murupara Branch
Kawerau

The East Coast Main Trunk (ECMT) is a railway line in the North Island of New Zealand, originally running between Hamilton and Taneatua via Tauranga, connecting the Waikato with the Bay of Plenty. The ECMT now runs between Hamilton and Kawerau, with a branch line to Taneatua from the junction at Hawkens. The line is built to narrow gauge of 1,067 mm (3 ft 6 in), the uniform gauge in New Zealand. It was known as the East Coast Main Trunk Railway until 2011, when the word "Railway" was dropped.[1]

History

Construction

In 1880, the North Island Main Trunk railway had reached Frankton, Hamilton, from Auckland. From there, the line made its way to Morrinsville in October 1884, Te Aroha in March 1886 and Paeroa in 1898. The route to Waihi through the Karangahake Gorge was surveyed in the next few years with construction starting in 1900, with three bridges, including a road-rail bridge and a kilometre-long tunnel, which has a 1:50 grade and took three years to build, being completed in 1904. The line between Paeroa and Waihi opened in November 1905. Surveys were undertaken for the route beyond Waihi in 1907 and construction started in March 1912, but was suspended in November of the same year. The work started again in 1914, but was suspended again in March 1917 because of a shortage of staff due to World War I. The works started again in 1918, and the railway through the Athenree Gorge opened to Tahawai in 1927 and Tauranga in March 1927. The remaining length of line to Te Puke and Taneatua opened in 1928, and the Taneatua Express started in 1929.

Original intention of the rail line

Originally in the 1910s and 1920s, the East Coast Main Trunk line was to run from Pokeno to Gisborne via Paeroa, Tauranga, Opotiki and through the Waioeka Gorge, connecting with the Moutohora Branch to Gisborne; creating a link from the isolated Gisborne Section line to Auckland via the Bay of Plenty. Gisborne was subsequently linked to the south with Wellington via Wairoa and Palmerston North with the Palmerston North - Gisborne Line in 1942.

Work began on extending the line from the Taneatua Branch to Opotiki in March 1928 [2] [3] [4]

[5] and on building the Paeroa–Pokeno Line in 1938, when the Minister of Public Works Bob Semple on 28 January turned the first sod ; it was said that the the proposed 29 mile line would shorted the distance from Auckland to towns on the ECMT by nearly 50 miles.

[6] [7] [8] [9]

However, due to two World Wars, an economic depression, and an influenza epidemic, the full railway was never completed. In June 1928, 250 men employed by the Public Works Department (many living in government houses or huts) were dismissed, to be replaced by NZR staff.[10] [11]

Several routes for the link from the Moutohora Branch to the Taneatua Branch were surveyed (20 routes by 1920), but the expense of a line descending to the Bay of Plenty could not be justified (see Moutohora Branch).

Kaimai Tunnel deviation

The Kaimai Tunnel runs for 8896 m under the Kaimai Ranges. It was the longest tunnel in the Southern Hemisphere, but was eclipsed by the 13,400m No. 4 tunnel of the Hex River Tunnels system. Construction started from both sides of the range in 1969: the headings met in 1976 and the tunnel opened on 12 September 1978.

Closure of the northern route

Former ECMT rail bridge in Karangahake Gorge. The bridge is now part of a public walkway and the Hauraki Rail Trail cycleway.

After the opening of the Kaimai Tunnel, the route through the Karangahake Gorge to the eastern junction closed in 1978 and was dismantled in 1980. The railway from Morrinsville to Paeroa stayed open and continued (via the Thames Branch) to Thames until closure in 1991 and lifting between Waitoa and Thames in 1996/1997. The 11 km section from Morrinsville to Waitoa reopened in 2004 to serve the Fonterra dairy factory at Waitoa. The rail bridge at Te Aroha is now a walkway over the Waihou River; the route from the tunnel to Waikino through the Karangahake Gorge is now a walkway; from Waikino to Waihi the Goldfields Railway heritage line preserves the old railway; and State Highway 2 runs through the Athrenee Gorge along part of the original rail alignment. Along various parts of State Highway Two, one can see various parts of the old railbed. Bridge piers and abutments are also visible. Old bridges are also extant at Waitoa, Te Aroha, Karangahake, Waikino and Aongatete. Near Apata, the old and newer bridges of both routes can be seen from the highway spanning the Wainui Stream. In Hamilton, the original Waikato River bridge now carries road traffic as part of Claudelands Road.

Passenger services

Taneatua Express

When the line opened to its terminus at Taneatua, the Taneatua Express ran from Auckland. The service took 12 hours, later reduced to 10½ hours, and ran two or three times weekly. The last train ran on 7 February 1959, and was replaced by a railcar service as far as Te Puke, due to negligible traffic to Taneatua. The railway struggled to compete with private cars and the service was withdrawn on 11 September 1967. Other than special excursions, there were no passenger services until 1991.

Kaimai Express

In 1991, the Kaimai Express started and ran to Tauranga. Along with the Geyserland Express it used the Silver Fern railcars that had been used on the North Island Main Trunk line. The first train ran on 9 December 1991, running a morning service from Tauranga to Auckland and afternoon service from Auckland to Tauranga, taking 3½ hours. The times changed in 2000 to enable the introduction of the Waikato Connection commuter service between Hamilton and Auckland. In 2001, it was announced that the service was too uneconomic to continue, and the last service was on 7 October 2001.

Connecting lines

Line Name Date Opened Date Closed ECMT Junction Terminus Length Notes
North Island Main Trunk 19 December 1877 Open Frankton Junction Auckland/Wellington 680 km
Cambridge Branch 8 October 1884 Open Ruakura Junction Hautapu 14.8 km Hautapu-Cambridge section (4.5 km) closed and lifted 1999.
Rotorua Branch 8 March 1886 7 October 2001 Morrinsville Junction Rotorua 110 km Built by Thames Valley and Rotorua Railway Co. First 24.6 km added to ECMT on opening of Kaimai Deviation, 1978. Section between Waharoa and Kinleith became Kinleith Branch in 1978, with Rotorua Branch becoming secondary branch section between Putaruru and Rotorua. Last 2 km of Rotorua Branch closed and lifted in 1989 with station relocated to Koutu. Rotorua Branch mothballed 2002.
Waitoa Branch 1 March 1886 Open Morrinsvillle Junction Waitoa 10 km Formerly part of the Thames Branch 1886-1928 & 1978-1991, Part of ECMT 1928-1978.
Thames Branch 19 December 1898 1991 Paeroa Junction Thames North 33 km Morrinsvillle-Thames 70 km 1883-1928 & 1978-1991, Paeroa Junction-Thames North 33 km 1928-1978. Lifted beyond Waitoa 1995.
Mount Maunganui Branch 16 October 1913 Open Te Maunga Junction Mount Maunganui 7.5 km Portage line for Public Works Dept 1913-1928. Reopened for RNZAF 1942-1946. Reopened by NZR 1955.
Kawerau Branch 26 October 1953 Open Hawkens Junction Kawerau 14 km Incorporated into ECMT, 1978.
Taneatua Branch 2 September 1928 Mothballed Hawkens Junction Taneatua 25 km Formerly eastern end of ECMT until 1978.

Connecting private railways

Junction Station Date Opened Date Closed Owner Notes
Morrinsville 1 March 1886 Open Thames Valley and Rotorua Railway Co. Purchased by the Government in 1886 (became Rotorua Branch.)
Waikino 1925 Kauri Timber Co. Steam-powered bush tramway to Waitawheta valley
Waikino/Waihi 1897 1952 Waihi Gold Mining Company 2'9" steam railway between Waikino and Waihi, extensive network in Waihi Borough.
Waihi 1899 1921 Waihi Timber Company Steam powered bush tram to Waimata valley and Mataora Valley
Omokoroa 1912 1947 Whakamarama Land & Timber Co Steam powered bush tramway from Omokoroa Point to deep in the Kaimai Ranges.
Edgecumbe 1926 1960s Matahina Tramway Inc Owned by several sawmillers including WBM, Matahina Forests Ltd, Kauri Sawmills Ltd.
Awakeri 1939 2002 Whakatane Board Mills Ltd / Carter Holt Harvey 10 km line, later Whakatane Board Mills Line. Operation taken over by Tranz Rail in 1999. Closed and lifted 2002.

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  • Churchman, Geoffrey B., and Hurst, Tony; The Railways of New Zealand: A Journey Through History, pp109–114 (1990, Auckland; HarperCollins Publishers), ISBN 1-86950-015-6

External links

Photos -